hastelloy c276 plate

Most reliable Hastelloy Plate suppliers, 2.4819 Hastelloy C276 Sheet, hastelloy c276 plate manufacturers in India, suppliers of SB 575 Hastelloy C276 Strip

Biggest supplier of Alloy Hastelloy C276 Coil, check UNS N10276 Hastelloy C276 Foil Price in India, Manufacturer of Alloy C276 Plate, Hastelloy C276 SB575 4mm Thick Plate, Stockist of Hastelloy Alloy C276 Sheet in Mumbai, India

Although there are several Hastelloy variations of the nickel based material , Hastelloy C276 SB575 4mm Thick Plate is by far the most widely used alloy across various industries. The 2.4819 Alloy C276 Flat Plate is widely utilized in environments which have the most severe conditions. . Therefore the Haynes Alloy C276 N10276 Polished Plate is used in industries such as pulp and paper production, chemical processing, pollution control, industrial and municipal waste treatment, as well as for the recovery of sour natural gas in sour wells.

Table Of Content

One Stop Shop For All hastelloy c276 plate suppliers india, importer of ASTM B575 C276 Hastelloy 2D Plate, Hastelloy C276 Alloy Strip Tape in India, manufacturers of Alloy C276 Hastelloy Hot Rolled Plate, Check C276 Hastelloy Shim Sheet Price List

 

Hence, these hastelloy c276 plate suppliers in Mumbai suggest using this alloy for applications in general corrosive service.The low carbon content in the Hastelloy C276 Alloy Strip Tape  is known to minimize carbide precipitation during welding operation in order to maintain corrosion resistance to structures in an as welded condition . This  Alloy C276 Hastelloy Hot Rolled Plate is resistant to the formation of grain boundary precipitates in the heat affected welded zone.  Thus, the hastelloy c276 plate suppliers in Chennai is suitable for use in most chemical process application in an as welded condition.

The materials used in the manufacture of Hastelloy C-276 UNS N10276 Cold Rolled Plate must not only confirm to the chemical requirements, but also the mechanical requirements as specified in the ASTM B575 standard . With regards to the mechanical properties of the hastelloy c276 Plate, this particular alloy needs to conform to the required tensile properties. The parameter of these tensile strength properties for this superalloy is inclusive of the Hastelloy C276 Grade Shim Stock materials tensile strength, yield strength, elongation, as well as its Rockwell hardness. Further the produced C276 Hastelloy Shim Sheet and strip needs to also conform to the specified grain sizes.

compare Hastelloy C276 Plate price with Hastelloy C22 Plate price list

 

---

ASTM B575 is a specification which covers alloy forms produced in the form of ASTM B575 C276 Hastelloy 2D Plate, sheets, along with strip. In this case, the ASTM B575 specified Hastelloy UNS N10276 Polished Cold Drawn Plate  is chemically a low carbon based nickel alloy. Apart from nickel, the Nickel Alloy C276 Clad Plate additionally contains chromium and molybdenum, which in turn give the alloy its corrosion resistance properties especially against pitting and crevice corrosion in reducing environments. And chromium offers resistance against oxidizing media.

 

---

Grade	ASTM B575 UNS N10276, Hastelloy C276 - UNS N10276 - ALLOY C-276 (Ni/ 15Cr/ 16Mo/ 4W)
Type	Foils, Coils, Plate, Strip, Sheet, Flats, Clad Plate, Rolling Plate, Flat Shim, Plain Sheet, Rolling Sheet Rolls, Blank (Circle), ,Flat Sheet, Shim Sheet, soft annealed, descaled, sheared, annealed, Checker Plate, tread plate
Alloy Hastelloy C276 Plate Thickness	0.3 to 1200 mm or as required
C276 Hastelloy plate Width	0-2500mm or as required
ASTM B575 Alloy C276 Plate Length	0-12mm or as required
ASTM B575 Alloy C276 Plate surface	BA, No.3, No.4, No.6, No.1, No. 2D, No. 2B, BA NO(8), No.7, 2B, 2D, Hot rolled plate (HR), Cold rolled sheet (CR), No.1 finish hot rolled ASTM B575 Alloy C276 Plate, SATIN (Met with Plastic Coated), 2B, 1D, No.4, 8K, BA, hairline, brush, satin, mirror etc.
UNS N10276 Hastelloy C276 Plate Process	Hot/ Cold Rolled

 

Other Useful Information of Hastelloy C276 Plate for buyers

ASTM B575 Alloy C276 Plate, Sheet and Strip	ASTM B 575/B 906 & ASME SB 575/SB 906, ISO 6208, DIN 17750, VdTÜV 400/12.98
Hastelloy C276 Plate standards and approvals	ISO 15510 EN 10051 EN ISO 18286 EN 10088-1 ASTM A 480 EN ISO 9445 ASME IID ASTM A 959
Tolerances of width and thickness	EN 10151 ASTM B575 Alloy C276 strip for springs EN 10258 (formerly DIN 59381) EN 10088 ASTM B575 Alloy C276 strip (general)
UNS N10276 Plate Hardness	Half Hard, Soft, Spring Hard, Quarter Hard, Hard ASTM B575 Alloy C276 Sheet suppliers
Standard ASTM B575 Alloy C276 Plate & Sheet Sizes	1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm Hot rolled C276 Hastelloy plate 3.0–10.0 mm Cold rolled C276 Hastelloy plate 0.5-6.4 mm
Availability of ASTM B575 Alloy C276 Foil sizes	Width: Up to 500 mm (19.5 in) Thickness : 8-100 microns (0.00031-0.004 in) Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns.
Plasma profiles	As per customer's drawings
Profiling	To provide a full profiling service in India we use numerous profiling methods including: Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting
Value added services for ASTM B575 Alloy C276 Coil	Blanking Slitting Cut-to-length Polishing
Value added services for ASTM B575 Alloy C276 Plate	Waterjet cutting, Laser cutting, Bending and mechanical processing, Plasma cutting, welding, edge preparation, sawing and shearing.
Hastelloy C276 Plate Origin	European Origin, Indian Origin, Japanese Origin
Manufacturer & exporter of	Alloy Hastelloy C276 Clad plate: Alloy Hastelloy C276 Clad plate is a composite steel plate made by bonding UNS N10276 Hastelloy C276 plate, etc. C276 Hastelloy Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width; ASTM B575 Alloy C276 Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width; ASTM B575 Alloy C276 Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width.
Test	SGS testing, UT, TUV etc
Packing of Hastelloy C276 Plate	Bundles with waterproof cloth outside or plywood box
Why buy ASTM B575 Alloy C276 Plate from Metal Tube Industries?	EN 10204 3.1 Free sample Free quote NABL Approved Lab Reports Mill Test Certificate is supplied with shipment. Tested to ASTM A923 Method "C" or ASTM G48 Method "A". Minimum Nitrogen content and Ferrite Count Test Any third party inspection is accepted.

 

---

Price list of Hastelloy C276 Plate in India	UNS N10276 Hastelloy C276 Plate Price in India (INR)	C276 Hastelloy plate Price in UK Pound sterling	Alloy Hastelloy C276 Plate Price in UAE Dirham
Hastelloy C276 Plate-135 Mm Od X 6mm Thk	INR 3,793	41.09 UK Pound sterling	196.72 UAE Dirham

This is an approximate Cost of C276 Hastelloy Sheet in India. For factory price buy directly from Hastelloy C276 Plate manufacturers in India, check latest ASTM B575 Alloy C276 Plate price list & stock sizes please mail us.

 

---

 

---

ASTM B575 Alloy C276 Plate melting range

°F : 2415-2500 °C: 1325-1370

 

---

UNS N10276 Hastelloy C276 Plate density

lb/in3 : 0.321 g/cm3 :8.89

 

---

C276 Hastelloy Sheet Weight & Density

Thickness	Alloy	Plate Weight per Unit Area	Density
3/16 inches	Hastelloy C276	0.06000 lbs/in²42.184176 kg/m²	0.315 lbs/in³8.72 g/cm³
1/4 inches	Hastelloy C276	0.08 lbs/in²56.245568 kg/m²	0.315 lbs/in³8.72 g/cm³
3/8 inches	Hastelloy C276	0.121 lbs/in²85.0714216 kg/m²	0.315 lbs/in³8.72 g/cm³
1/2 inches	Hastelloy C276	0.161 lbs/in²113.1942056 kg/m²	0.315 lbs/in³8.72 g/cm³
5/8 inches	Hastelloy C276	0.196 lbs/in²137.8016416 kg/m²	0.315 lbs/in³8.72 g/cm³
3/4 inches	Hastelloy C276	0.235 lbs/in²165.221356 kg/m²	0.315 lbs/in³8.72 g/cm³
7/8 inches	Hastelloy C276	0.274 lbs/in²192.6410704 kg/m²	0.315 lbs/in³8.72 g/cm³
1 inches	Hastelloy C276	0.313 lbs/in²220.0607848 kg/m²	0.315 lbs/in³8.72 g/cm³
1 1/4 inches	Hastelloy C276	0.391 lbs/in²274.9002136 kg/m²	0.315 lbs/in³8.72 g/cm³
1 1/2 inches	Hastelloy C276	0.47 lbs/in²330.442712 kg/m²	0.315 lbs/in³8.72 g/cm³
1 3/4 inches	Hastelloy C276	0.549 lbs/in²385.9852104 kg/m²	0.315 lbs/in³8.72 g/cm³
2 inches	Hastelloy C276	0.627 lbs/in²440.8246392 kg/m²	0.315 lbs/in³8.72 g/cm³
2 1/4 inches	Hastelloy C276	0.705 lbs/in²495.664068 kg/m²	0.315 lbs/in³8.72 g/cm³
2 1/2 inches	Hastelloy C276	0.784 lbs/in²551.2065664 kg/m²	0.315 lbs/in³8.72 g/cm³
2 3/4 inches	Hastelloy C276	0.862 lbs/in²606.0459952 kg/m²	0.315 lbs/in³8.72 g/cm³
3 inches	Hastelloy C276	0.941 lbs/in²661.5884936 kg/m²	0.315 lbs/in³8.72 g/cm³

 

---

Stocked Sizes
Size (in inches)	Size (in mm)
.125"	3.18mm
.134"	3.40mm
.156"	3.96mm
.187"	4.75mm
.250"	6.35mm
.312"	7.92mm
.375"	9.53mm
.500"	12.7mm
.625"	15.9mm
.750"	19.1mm
.875"	22.2mm
1"	25.4mm
1.125"	28.6mm
1.250"	31.8mm
1.500"	38.1mm
1.750"	44.5mm
2"	50.8mm
2.500"	63.5mm
3"	76.2mm

 

---

ASTM B575 Alloy C276 Plate Imperial Dimensions

Plate Surface finish	Gauge (in)	Width (max in)
2B – Cold rolled, heat treated, pickled, skin passed Plate	10–24	72*
2D – Cold rolled, heat treated, pickled plate	12–24	60
BA Mexinox only	18–28	48
Polished plate (not brushed)	11–24	60
Temper rolled plate Mexinox only	13–29	48

ASTM B575 C276 Alloy Plate Metric Dimensions

Plate Surface finish	Thickness (mm)	Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate	0.25–8.0	2032
2D – Cold rolled, heat treated, pickled plate	0.4–6.35	1524
2E – Cold rolled, heat treated, mechanically descaled plate	0.4–8.0	2032
2R – Cold rolled, bright annealed plate	0.25–3.5	1524
2H – Work hardened plate	0.4–6.35	1524
Polished, brushed plate	0.5–4.0	1524

 

---

we stock following Types of Hastelloy C276 Plate:

C276 Hastelloy plate	UNS N10276 Hastelloy C276 Rolling Plate
ASTM B575 Alloy C276 Chequered Plate	Alloy Hastelloy C276 Quarto Plate
UNS N10276 Hastelloy C276 Cold Rolled Plate	Alloy Hastelloy C276 Bbq Plate
Alloy Hastelloy C276 Hot Rolled Plate	ASTM B575 Alloy C276 Perforated Plate
Alloy Hastelloy C276 Plate Mill Finish	Hastelloy C276 Din 2.4819 Thin Plate
ASTM B575 Alloy C276 Plate 2b Finish	Alloy C276 Nickel Diamond Plate
Hastelloy C276 Din 2.4819 Chequer Plate	UNS N10276 Alloy C276 Tread Plate
Alloy C276 Nickel Clad Plate	Hastelloy C276 Alloy Tisco Plate
Hastelloy C276 Alloy Checker Plate	2.4819 Alloy C276 Polished Plate
UNS N10276 Alloy C276 Plate Mirror Finish	Hastelloy C276 Grade Chequered Plate
2.4819 Alloy C276 Plate Brushed Finish	Hastelloy C276 Superalloy Hot Rolled Sheet
Hastelloy C276 Grade 10mm Plate	Hastelloy Alloy C276 Cold Rolled Sheet
Hastelloy Alloy C276 Custom Cut Plate	Hastelloy C276 Nickel Alloy Sheet
Hastelloy C276 Superalloy 1/4 Inch Plate	2.4819 Hastelloy C276 Perforated Sheet
Hastelloy C276 Nickel Alloy Embossed Plate	C276 Hastelloy Plasma Cutting Plate
2.4819 Hastelloy C276 Checkered Plate	ASTM B575 Alloy C276 Laser Cut Plate

 

---

Alloy	Product form	Dimension
ALLOY C-276 (Ni/15Cr/16Mo/4W)	Sheet; cold rolled, solution annealed	0.4x914.4 mm x coil, Weight=3.10 kg/m
INCONEL C-276 (Ni/15Cr/16Mo/4W)	Sheet; cold rolled, solution annealed	0.5x1000 mm x coil, 4.4 kg/m
INCONEL C-276 (Ni/15Cr/16Mo/4W)	Sheet; cold rolled, solution annealed	0.7x1219 mm x coil, 7.7 kg/m
INCONEL C-276 (Ni/15Cr/16Mo/4W)	Sheet; cold rolled	0.965x1219x3657 mm, 38.25 kg/pc
INCONEL C-276 (Ni/15Cr/16 Mo/4W)	Sheet; cold rolled, solution annealed	1.0x1219 mm x coil, 10.8 kg/m
INCONEL C-276 (Ni/15Cr/16Mo/4W)	Sheet; cold rolled, solution annealed	1.5x1220x3000 mm, 48.5 kg/pc
INCONEL C-276 (Ni/15Cr/16Mo/4W)	Sheet; cold rolled, solution annealed	1.6x1220x3000 mm, 52.0 kg/pc
INCONEL C-276 (Ni/15Cr/16Mo/4W)	Sheet; cold rolled, solution annealed	2.0x1220x3000 mm, 63.0 kg/pc
ALLOY C-276 (Ni/15Cr/16Mo/4W)	Sheet; cold rolled, solution annealed, pickled	3.0x1220x3000 mm, 99.0 kg/pc
ALLOY C-276 (Ni/15Cr/16Mo/4W)	Sheet; CR, Pkl, solution annealed,	4.0x1200x3000 mm, 134 kg/pc
INCONEL C-276 (Ni/15Cr/16Mo/4W)	Plate; hot rolled, descaled, sol annealed, sheared	6.0x2000x6000mm, 664 kg/pc
INCONEL C-276 (Ni/15Cr/16Mo/4W)	Plate; hot rolled, sol annealed, descaled, sheared	8.0x2000x6000 mm, 902 kg/pc
ALLOY C-276 (Ni/15Cr/16Mo/4W)	Plate; hot rolled	12.0x1000x1000 mm, 107 kg/pc
INCONEL C-276 (Ni/15Cr/16Mo/4W)	Plate; hot rolled	25.0x1200x3000mm, 198 kg/pc

---

STANDARD	WERKSTOFF NR.	UNS	JIS	GOST	EN	OR
Hastelloy C276	2.4819	N10276	NW 0276	ХН65МВУ	NiMo16Cr15W	ЭП760

---

Chemical Composition of ASTM B575 Alloy C276 Plate

Grade	C	Mn	Si	S	Co	Ni	Cr	Fe	Mo	P
C276	0.010 max	1.00 max	0.08 max	0.03 max	2.50 max	50.99 min*	14.50 – 16.50	4.00 – 7.00	15.00 – 17.00	0.04 max

 

ASTM B575 Alloy C276 Plate Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Hastelloy C276	8.89 g/cm3	1370 °C (2500 °F)	Psi – 1,15,000 , MPa – 790	Psi – 52,000 , MPa – 355	40 %

Material	Ultimate Tensile (min)		Yield Strength (Min)		Elongation %	Hardness Rb
	Ksi	Mpa	Ksi	Mpa
C276 Plate	107.4	741	50.3	347	67	89
C276 Sheet	115.5	796	54.6	376	60	86

 

---

Hastelloy

Hastelloy® could be a trademark for a series of high-strength, nickel based, corrosion resistant alloys created by Haynes Worldwide.

Hastelloy Melting Point, Density and Tensile Strength

 

Inconel

Inconel is a family of austenitic nickel-chromium-based superalloys.

Inconel Melting Point, Density and Tensile Strength

 

---

• Low carbon content which minimizes grain-boundary carbide precipitation during welding to maintain resistance to corrosion in heat-affected zones of welded joints
• Exceptional resistance to strong solutions of oxidizing salts, such as ferric and cupric chlorides
• Excellent corrosion resistance in reducing environments
• High nickel and molybdenum contents providing good corrosion resistance in reducing environments
• One of few materials to withstand the corrosive effects of wet chlorine gas, hypochlorite and chlorine dioxide
• Resistance to localized corrosion such as pitting and stress-corrosion cracking

 

---

• Organic chloride process equipment.
• Evaporators, heat exchangers, filters and mixers used in sulfuric acid environments.
• Equipment for flue-gas desulfurisation plants.
• Equipment for processes utilizing halide or acid catalysts.
• Digesters and bleach plants in the paper industry.
• Sulfuric acid reactors.
• Components exposed to sour gas.

 

---

• Thickness greater than 6.35 mm is called a Hastelloy C276 Plate.
• Thickness greater than 0.15 mm and less than 6.35mm is called a Hastelloy C276 Sheet.
• Thickness less than 0.15mm is called a Hastelloy C276 Foil.

 

---

Gujarat	Tamil Nadu	Kerala	Jharkhand
Andhra Pradesh	Karnataka	Delhi	West Bengal
Noida	Uttar Pradesh	Bihar	Maharashtra

 

---

United Arab Emirates	Bahrain	Iraq	Kuwait
Oman	Qatar	Saudi Arabia(KSA)

 

One of India’s largest supplier of Hastelloy C-276 UNS N10276 Cold Rolled Plate, stockholder of JIS NW C276 Plate, Hastelloy C276 N10276 Slitting Coil in India, wholesaler of Hastelloy C276 Grade Shim Stock in Mumbai, manufacturers of Nickel Alloy C276 Clad Plate

Get a Quote from Hastelloy UNS N10276 Polished Cold Drawn Plate suppliers, dealer of 2.4819 Alloy C276 Flat Plate stockist of Hastelloy C276 ASTM B575 Polish Plate, Hastelloy C276 Circle, traders of Haynes Alloy C276 N10276 Polished Plate