Incoloy 800 plate

  • Home
  • incoloy 800 plate supplier

Buy from Certified Inconel 800 plate supplier, manufacturer of ASTM B409 Incoloy 800H Plate, Incoloy 800HT Plate in India, Incoloy 800 Sheet, Inconel 800 plate suppliers.

Accept all small/ Large Orders of Incoloy 800 Alloy Strip, Super Price Manufacturer of Incoloy 800 Din 1.4876 Coil, check Incoloy N08800 Shim Sheet Price in India, stockist of Nickel Alloy 800 Hot Rolled Plate in Mumbai, India.

Incoloy 800H Plate is a solution heat treated, carbon controlled version of its parent Alloy 800. The point to note with the higher carbon version of the Incoloy 800 Plate is that the modified alloy comes with improved elevated temperature properties. For instance, this specific grade of inconel 800 plate has a higher creep as well as stress rupture characteristics, even when the alloy has been exposed to heat which falls  in the 1100°F to 1800°F temperature range.

Incoloy 800 plate
Incoloy 800 plate
Inconel 800H Plate
Inconel 800H Plate
Incoloy 800ht Plate
Incoloy 800ht Plate

 

Table Of Content

Held wide Alloy 800 Incoloy Shim Stock, SB 409 Alloy 800H 2D Plate, Inconel 800 Plate material manufacturers, Check Incoloy Alloy 800 Plate Price List, supplier of Alloy 800 Inconel Foil, Incoloy 800 Nickel Strip Tape importer in India

Another important feature of the N08800 Alloy 800 Cold Rolled Plate is its excellent resistance to chlorine ion stress related corrosion cracking, to which the metal, like its other Inconel counterparts is virtually immune to.Incoloy 800HT Plate will not become embrittled even after prolonged usage of the alloy in between the temperature range of 1200 - 1600°F, at which stage many stainless steel grades tend to become brittle.

The Nickel Alloy 800 Hot Rolled Plate is known for its excellent cold forming characteristics. These cold forming characteristics of the alloy have been typically associated with the nickel-chromium based alloys are exhibited with the Incoloy 800 Din 1.4876 Coil HT. When the Incoloy 800 Nickel Strip Tape has been cold formed extensively,  the grain size will produce a visibly undulated surface, which could be referred to as an orange peel. Alloy 800 Incoloy Shim Stock HT could be welded by the common procedures that have been used on stainless steels.

 

Alloy 800 Plate Price in India

Price list of Incoloy 800 Plate in India UNS N08800 Incoloy 800 Plate Price in India (INR) per unit Incoloy 800HT Plate Price in UK Pound sterling Alloy Incoloy 800H Plate Price in UAE Dirham

Ni-Cr-Fe Alloy Steel Plates Conf. To Specn. Asme Sb409/Sa 240 (Incoloy 800/800h/800ht) Size (Mm) : 8 X 1150 X 2000

INR 734 7.91 UK Pound sterling 37.98 UAE Dirham

This is an approximate Cost of Incoloy 800HT Sheet in India. For factory price buy directly from Incoloy 800 Plate manufacturers in India, check latest ASTM B409 Alloy 800 Plate price list & stock sizes please mail us.

 

Specification of Incoloy 800 Plate

Grade Nickel Iron Chromium Alloy 800 - UNS N08800 - Incoloy 800
Type Foils, Coils, Plate, Strip, Sheet, Flats, Clad Plate, Rolling Plate, Flat Shim, Plain Sheet, Rolling Sheet Rolls, Blank (Circle), ,Flat Sheet, Shim Sheet, soft annealed, descaled, sheared, annealed, Checker Plate, tread plate
ASTM B409 Alloy 800 Plate surface BA, No.3, No.4, No.6, No.1, No. 2D, No. 2B, BA NO(8), No.7, 2B, 2D, Hot rolled plate (HR), Cold rolled sheet (CR), No.1 finish hot rolled ASTM B409 Alloy 800 Plate, SATIN (Met with Plastic Coated), 2B, 1D, No.4, 8K, BA, hairline, brush, satin, mirror etc.
ASTM B409 Alloy 800 Plate Length 0-12mm or as required
Alloy Incoloy 800H Plate Thickness 0.3 to 1200 mm or as required
Incoloy 800HT Plate Width 0-2500mm or as required
UNS N08800 Incoloy 800 Plate Process Hot/ Cold Rolled

 

Other Useful Information of Incoloy 800 Plate for buyers

ASTM B409 Alloy 800 Plate, Sheet and Strip
ASTM B409 UNS N08800, ASME SB409, ASTM B409 UNS N08810, ASTM B409 UNS N08811, MSRR, AMS, BS
Incoloy 800 Plate standards and approvals
  • ASTM A 480
  • ISO 15510
  • EN ISO 18286
  • EN 10088-1
  • EN 10051
  • ASTM A 959
  • EN ISO 9445
  • ASME IID
Tolerances of width and thickness
  • EN 10151 ASTM B409 Alloy 800 strip for springs
  • EN 10258 (formerly DIN 59381)
  • EN 10088 ASTM B409 Alloy 800 strip (general)
UNS N08800 Plate Hardness Half Hard, Soft, Spring Hard, Quarter Hard, Hard ASTM B409 Alloy 800 Sheet suppliers
Standard ASTM B409 Alloy 800 Plate & Sheet Sizes

1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm

  • Hot rolled Incoloy 800HT Plate 3.0–10.0 mm
  • Cold rolled Incoloy 800HT Plate 0.5-6.4 mm
Availability of ASTM B409 Alloy 800 Foil sizes
  • Width: Up to 500 mm (19.5 in)
  • Thickness : 8-100 microns (0.00031-0.004 in)
  • Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns.
Plasma profiles As per customer's drawings
Profiling

To provide a full profiling service in India we use numerous profiling methods including:

  • Plasma Plate Cutting
  • Oxy-propane Flame Cutting
  • Laser Plate Cutting
Value added services for ASTM B409 Alloy 800HT Coil
  • Blanking
  • Slitting
  • Cut-to-length
  • Polishing
Value added services for ASTM B409 Alloy 800 Plate Waterjet cutting, Laser cutting, Bending and mechanical processing, Plasma cutting, welding, edge preparation, sawing and shearing.
Incoloy 800 Plate Origin European Origin, Indian Origin, Japanese Origin
Manufacturer & exporter of
  • Alloy Incoloy 800H Clad plate: Alloy Incoloy 800H Clad plate is a composite steel plate made by bonding UNS N08800 Incoloy 800 plate, etc.
  • Incoloy 800HT Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width;
  • ASTM B409 Alloy 800 Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width;
  • ASTM B409 Alloy 800 Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width.
Test SGS testing, UT, TUV etc
Packing of Incoloy 800 Plate Bundles with waterproof cloth outside or plywood box
Why buy ASTM B409 Alloy 800 Plate from Metal Tube Industries?
  • Mill Test Certificate is supplied with shipment.
  • Free sample
  • EN 10204 3.1
  • Minimum Nitrogen content and Ferrite Count Test
  • Free quote
  • NABL Approved Lab Reports
  • Tested to ASTM A923 Method "C" or ASTM G48 Method "A".
  • Any third party inspection is accepted.

Now Stocking 800-LCF (Low Cycle Fatigue) Plates:

  • Available in thickness from .031" nom. to .078" nom.
  • This material is Vacuum Induction Melted - Electroslag Remelted, Type 1

 

What is Incoloy 800 Plate?

UNS N08800 Incoloy 800 4mm Thick Plate is an alloy which primarily consists of elements iron, nickel and chromium. One of the highlights of using the Inconel Alloy 800 Polish Plate is that the metal offers sufficient resistance to not only carburization but also oxidation at elevated temperatures along with having moderate tensile strength as well.The Incoloy 800 Din 1.4876 Flat Plate is particularly considered to be useful for high temperature equipment in sectors such as the petrochemical industry.This is because the 1.4876 Alloy 800 Clad Plate does not form the embrittling sigma phase even after being exposed to a temperature as high as about 1200°F for a long period of time.

Types of Incoloy 800 Plate

UNS N06Incoloy 800HT 600 Chequered Plate
UNS N08800 Incoloy 800 Chequered Plate
Alloy 800 Nickel Clad Plate
Alloy 800 Nickel Clad Plate
Alloy Inconel 600 Shim Stock
Alloy Incoloy 800 Shim Stock
Inconel 600 Superalloy Mesh Plate
Incoloy 800 Superalloy Mesh Plate
Incoloy 800HT Plate
Incoloy 800HT Plate
ASTM B409 Alloy 800 Sheet
ASTM B409 Alloy 800 Sheet
UNS N06Incoloy 800HT 600 Foil
UNS N08800 Incoloy 800 Foil
Alloy Inconel 600 Coil
Alloy Incoloy 800H Coil
1.4876 Incoloy 600 Hot Rolled Plate
1.4876 Incoloy 800 Hot Rolled Plate
Inconel 600 Din 2.4816 Cold Rolled Sheet
Incoloy 800 Din 1.4876 Cold Rolled Sheet
Inconel Alloy 800 Checker Plate
Inconel Alloy 800 Checker Plate
Inconel 600 Nickel Alloy Cold Rolled Plate
Incoloy 800 Nickel Alloy Cold Rolled Plate
Inconel 600 Rolling Plate
Incoloy 800 Rolling Plate
Alloy Inconel 600 Polished Plate
Alloy Incoloy 800H Polished Plate
Incoloy 800HT Quarto Plate
Incoloy 800HT Quarto Plate
ASTM B409 Alloy 800 Flat Sheet
ASTM B409 Alloy 800 Flat Sheet
ASTM B409 Alloy 800 Precision Strip
ASTM B409 Alloy 800 Precision Strip
Alloy Inconel 600 Strip Tape
Alloy Incoloy 800H Strip Tape
Incoloy 800HT Shim Sheet
Incoloy 800HT Shim Sheet
ASTM B409 Alloy 800 Perforated Sheet
ASTM B409 Alloy 800 Perforated Sheet

 

UNS N08800 Incoloy 800 Plate density

UNS N08800 Incoloy 800 Plate density
  • lb/in3 :0.287
  • g/cm3 : 7.94

 

ASTM B409 Alloy 800 Plate melting range

ASTM B409 Alloy 800 Plate melting range
  • F :2475-2525
  • C: 1357-1385

 

Ready Stock of Alloy Incoloy 800 Plate

we stock following Types of Incoloy 800 Plate:

Alloy 800 Incoloy Plate Mill Finish Alloy 800 Inconel Thin Plate
Inconel 800 Clad Plate Alloy Incoloy 800 Tisco Plate
Incoloy Alloy 800 Plate 2b Finish Inconel 800 Diamond Plate
Alloy 800 Inconel Chequer Plate Incoloy 800 Din 1.4876 Tread Plate
Alloy Incoloy 800 Checker Plate N08800 Alloy 800 Polished Plate
Nickel Alloy 800 Plate SB 409 Alloy 800H Rolling Plate
Incoloy 800 Alloy Hot Rolled Plate Incoloy Alloy 800 Perforated Plate
SB 409 Alloy 800H Cold Rolled Plate Alloy 800 Incoloy Bbq Plate
Incoloy 800 Chequered Plate Incoloy 800 Alloy Quarto Plate
Incoloy UNS No 8800 Embossed Plate Nickel Alloy 800 Plasma Cutting Plate
ASTM B409 Incoloy 800H 1/4 Inch Plate ASTM B409 800H Incoloy Perforated Sheet
Incoloy N08800 Custom Cut Plate Incoloy UNS No 8800 Sheet
ASTM B409 800H Incoloy Checkered Plate Incoloy 800 Laser Cut Plate
Incoloy 800 Din 1.4876 Plate Mirror Finish Incoloy 800 Nickel Chequered Plate
N08800 Alloy 800 Plate Brushed Finish ASTM B409 Incoloy 800H Hot Rolled Sheet
Incoloy 800 Nickel 10mm Plate Incoloy N08800 Cold Rolled Sheet

 

Size chart of Incoloy 800 Plate

Stocked Sizes
Size (in inches)
Size (in mm)
.125"
3.18mm
.134"
3.40mm
.156"
3.96mm
.187"
4.75mm
.250"
6.35mm
.312"
7.92mm
.375"
9.53mm
.500"
12.7mm
.600"
15.9mm
.750"
19.1mm
.875"
22.2mm
1"
25.4mm
1.125"
28.6mm
1.250"
31.8mm
1.500"
38.1mm
1.750"
44.5mm
2"
50.8mm
2.500"
63.5mm
3"
76.2mm

Dimensions: widths 1000/1220/1500 mm, lengths 2000/2500/3000 mm.

 

Dimensions of Incoloy 800 Plate

ASTM B409 Alloy 800 Plate Imperial Dimensions

Plate Surface finish Gauge (in) Width (max in)
2B – Cold rolled, heat treated, pickled, skin passed Plate 10–24 72*
2D – Cold rolled, heat treated, pickled plate 12–24 60
BA Mexinox only 18–28 48
Polished plate (not brushed) 11–24 60
Temper rolled plate Mexinox only 13–29 48

ASTM B409 800 Alloy Plate Metric Dimensions

Plate Surface finish Thickness (mm) Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate 0.25–8.0 2032
2D – Cold rolled, heat treated, pickled plate 0.4–6.35 1524
2E – Cold rolled, heat treated, mechanically descaled plate 0.4–8.0 2032
2R – Cold rolled, bright annealed plate 0.25–3.5 1524
2H – Work hardened plate 0.4–6.35 1524
Polished, brushed plate 0.5–4.0 1524

 

in a variety of thicknesse available shown below:

0.5 mm
0.6 mm
0.8 mm
1.0 mm
1.2 mm
1.5 mm
1.6 mm
1.8 mm
2.0 mm
3.0 mm

4.0 mm
5.0 mm
6.0 mm
8.0 mm
10.0 mm
12.0 mm
15.0 mm
20.0 mm
25.4 mm

 

UNS N08800 Alloy 800/H/HT, AMS 5871Sheet & Plate Stock List

Alloy Product form Dimension
INCOLOY 800HT (32 Ni/21 Cr) Sheet; cold rolled, annealed 1.0x1220 mm x coil, 9.9 kg/m
INCOLOY 800H/HT (32 Ni/21 Cr) Sheet; cold rolled, annealed, pickled 3.0x1200x3000 mm, 85.8 kg/pc
ALLOY 800H (32 Ni/21 Cr) Sheet; cold rolled, solution annealed 3.0x1500x3000 mm, 109 kg/pc
ALLOY 800H/HT (32 Ni/21 Cr) Plate; hot rolled, solution annealed, descaled, sheared 4.0x1200x3000 mm, 118 kg/pc
ALLOY 800H/HT (32 Ni/21 Cr) Plate; hot rolled, solution annealed, descaled, sheared 5.0x2000x6000 mm, 530 kg/pc
ALLOY 800HT (32 Ni/21 Cr) Plate; hot rolled, sol annealed, descaled, sheared 6.0x2000x6000 mm, 590 kg/pc
ALLOY 800H/HT (32 Ni/21 Cr) Plate; hot rolled, solution annealed, descaled, sheared 12.0x2000x3000 mm, 576 kg/pc
INCOLOY 800H/HT (32 Ni/21Cr) Plate; hot rolled, annealed, descaled 15.0x2400x3000 mm, 884 kg/pc


Weight per Unit of Alloy 800 Inconel Plate

Incoloy 800 Sheet Weight & Density

Thickness Alloy Plate Weight per Unit Area Density
3/16 inches Incoloy 800 0.06000 lbs/in²42.184176 kg/m² 0.315 lbs/in³8.72 g/cm³
1/4 inches Incoloy 800 0.08 lbs/in²56.245568 kg/m² 0.315 lbs/in³8.72 g/cm³
3/8 inches Incoloy 800 0.121 lbs/in²85.0714216 kg/m² 0.315 lbs/in³8.72 g/cm³
1/2 inches Incoloy 800 0.161 lbs/in²113.1942056 kg/m² 0.315 lbs/in³8.72 g/cm³
5/8 inches Incoloy 800 0.196 lbs/in²137.8016416 kg/m² 0.315 lbs/in³8.72 g/cm³
3/4 inches Incoloy 800 0.235 lbs/in²165.221356 kg/m² 0.315 lbs/in³8.72 g/cm³
7/8 inches Incoloy 800 0.274 lbs/in²192.6410704 kg/m² 0.315 lbs/in³8.72 g/cm³
1 inches Incoloy 800 0.313 lbs/in²220.0607848 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/4 inches Incoloy 800 0.391 lbs/in²274.9002136 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/2 inches Incoloy 800 0.47 lbs/in²330.442712 kg/m² 0.315 lbs/in³8.72 g/cm³
1 3/4 inches Incoloy 800 0.549 lbs/in²385.9852104 kg/m² 0.315 lbs/in³8.72 g/cm³
2 inches Incoloy 800 0.627 lbs/in²440.8246392 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/4 inches Incoloy 800 0.705 lbs/in²495.664068 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/2 inches Incoloy 800 0.784 lbs/in²551.2065664 kg/m² 0.315 lbs/in³8.72 g/cm³
2 3/4 inches Incoloy 800 0.862 lbs/in²606.0459952 kg/m² 0.315 lbs/in³8.72 g/cm³
3 inches Incoloy 800 0.941 lbs/in²661.5884936 kg/m² 0.315 lbs/in³8.72 g/cm³

 

UNS N08800 Incoloy 800 Plate Properties

Chemical Composition of ASTM B409 Alloy 800/800H/800HT Plate


Grade C Mn Si S Cu Fe Ni Cr Al Ti
800 0.10 max 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800H 0.05 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800HT 0.06 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60ᴬ 0.15 – 0.60ᴬ

 

ASTM B409 Alloy 800/800H/800HT Plate Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
800 / 800H / 800HT 7.94 g/cm3 1385 °C (2525 °F) Psi – 75,000 , MPa – 520 Psi – 30,000 , MPa – 205 30 %

 

Equivalent Grades of Incoloy 800 Plate

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 800 1.4876 N08800 NCF 800 NA 15 ЭИ670 Z8NC32-21 X10NiCrAlTi32-20 XH32T
Incoloy 800H 1.4958 / 1.4876 N08810 NCF 800H NA 15(H) ЭИ670 Z8NC33-21 X5NiCrAlTi31-20 XH32T
Incoloy 800HT 1.4859 / 1.4876 N08811 NCF 800HT NA 15(HT) ЭИ670 X8NiCrAlTi32-21 XH32T

 

Difference between Incoloy 800 Plate, Sheet, & Foil

  • Thickness greater than 6.35 mm is called a Incoloy 800 Plate.
  • Thickness greater than 0.15 mm and less than 6.35mm is called a Incoloy 800 Sheet.
  • Thickness less than 0.15mm is called a Incoloy 800 Foil.

 

Difference Between Inconel and Incoloy

Incoloy

Incoloy refers to a range of superalloys produced by the Special Metals Corporation group of companies.

Incoloy Compositions (percentages)

Alloy name Balance
metal
Chro
mium
Alu
minum
Tita
nium
Carbon Yttrium oxide Copper Man
ganese
Cobalt Nickel Phos
phorus
Silicon Sulphur Moly
bdenum
Nb
+Ti
020 Fe (~40%) 20 n/p n/p <0.07 n/p 3.5 <2.0 n/p 35 <0.045 <1.0 <0.035 2.5 about 1
DS Fe (~40%) 18 n/p 0.2 0.1 nil 0.5 0.8-1.5 18 (Co+
Ni
38)
18 (Co+
Ni
38)
n/p 2.3 0.03
MA956 Fe (~75%) 20 4.75 0.4 <0.1 0.5 <0.15 <0.3 <0.3 <0.5 <0.02 n/p n/p

 

Inconel

Inconel is a family of austenitic nickel-chromium-based superalloys.

Inconel Composition

Inconel Element (% by mass)
Ni Cr Fe Mo Nb Co Mn Cu Al Ti Si C S P B
600 72.0 14.0–17.0 6.0–10.0 1.0 0.5 0.5 0.15 0.015
617 44.2–56.0 20.0–24.0 3.0 8.0–10.0 10.0–15.0 0.5 0.5 0.8–1.5 0.6 0.5 0.15 0.015 0.015 0.006
600 58.0 20.0–23.0 5.0 8.0–10.0 3.15–4.15 1.0 0.5 0.4 0.4 0.5 0.1 0.015 0.015
690 59.5 30 9.2 0.35 0.01 0.02 0.35 0.019 0.003
718 50.0–55.0 17.0–21.0 balance 2.8–3.3 4.75–5.5 1.0 0.35 0.2–0.8 0.65–1.15 0.3 0.35 0.08 0.015 0.015 0.006
X-750 70.0 14.0–17.0 5.0–9.0 0.7–1.2 1.0 1.0 0.5 0.4–1.0 2.25–2.75 0.5 0.08 0.01

 

Incoloy 800 plate uses

  • Power Generation Industry steam superheating tubing, high-temperature heat exchangers
  • Petrochemical furnace cracker tubes
  • Industry radiant tubes, return bends, muffles, retorts and furnace fixtures
  • Hydrocarbon Processing Industry catalyst tubing, convection tubing, outlet manifolds and quenching system piping

 

Alloy 800 Plate Features

  • Good corrosion resistance in many acidic environments
  • High creep rupture strength
  • High temperature strength
  • Good resistance to many sulfur-containing atmospheres
  • Resistant to oxidation and carburization in high temperature environments

 

Our dealers Of Incoloy 800 plate in following States

Andhra Pradesh
Uttar Pradesh
Delhi
Bihar
Gujarat
Maharashtra
Kerala
Noida
West Bengal
 Tamil Nadu
Jharkhand
Karnataka

 

Contact our sales engineers for Incoloy 800 Sheet in following countries

Qatar
Iraq
Saudi Arabia(KSA)
Oman
Kuwait
United Arab Emirates
Bahrain

 

Specialise in distributing N08800 Alloy 800 Cold Rolled Plate, wholesaler of 1.4876 Incoloy 800 Slitting Coil in Mumbai. stockholder of ASTM B409 Incoloy 800H Full size sheet in India. manufacturers of 1.4876 Alloy 800 Clad Plate
Contact us today for Incoloy UNS No 8800 Polished Plate dealer, traders of Incoloy 800 Din 1.4876 Flat Plate, Inconel Alloy 800 Polish Plate, stockist of UNS N08800 Incoloy 800 4mm Thick Plate