Incoloy 825 Plate

  • Home
  • Incoloy 825 Plate suppliers

Specialised in Inconel 825 Plate, 2.4858 Incoloy 825 Coil, Incoloy 825 Sheet, Inconel 825 Plate suppliers, Incoloy 825 Alloy Strip manufacturer of in India.

Contact us today for Inconel 825 Foil, Specical Price Manufacturer of 2.4858 Alloy 825 Plate, stockist of Incoloy Alloy 825 Sheet in Mumbai, India. check SB424 Alloy 825 Polished Plate Price in India

Although the Alloy 825 UNS N08825 Hot Rolled Plate tends to be similar to Inconel alloy grade 800, the SB424 Alloy 825 Polished Plate offers improved resistance to aqueous corrosion. The Alloy 825 Nickel Cold Rolled Plate has excellent resistance in both reducing acids as well as oxidizing acids.


Inconel 825 Plate
Inconel 825 Plate
Incoloy 825 Plate
Incoloy 825 Plate suppliers
Nickel Alloy 825 Sheet
Nickel Alloy 825 Sheet

 

Table Of Content

Buy Certified & Tested ASTM B424 825 Incoloy strip, Check Nickel Alloy 825 Coil Price List, manufacturers of Alloy 825 UNS N08825 Hot Rolled Plate, importer of Incoloy 825 Din 2.4858 Shim Sheet in India, supplier of Alloy 825 Nickel Cold Rolled Plate

The chromium content added in the Inconel 825 Foil is responsible for the alloy being particularly resistant to oxidizing substances such as nitrates , nitric acid, as well as to oxidizing salt.Further, the Incoloy 825 Din 2.4858 Shim Sheet is virtually immune to stress related corrosion cracking, along with being resistant to localized attack such as pitting and crevice corrosion. Inconel 825 Plate suppliers note that this alloy especially exhibits resistance to sulfuric acid and phosphoric acid as well. The ability of  Incoloy 8825 Polish Plate to resist corrosion by acids can be attributed to nickel in combination with molybdenum and copper.

This nickel based steel inconel 825 plate can be used in several areas such as its application for chemical processing, oil and gas well piping, nuclear fuel reprocessing, acid production, pollution control equipment, and pickling equipment too.The Alloy 825 Inconel Strip Tape also demonstrates good resistance against intergranular corrosion. This is due to the addition of element titanium along with the combination of an appropriate heat treatment, which stabilizes the Incoloy Alloy 825 Sheet against sensitization to intergranular corrosion.

Another reason why the Incoloy 825 Plate is used in the above industries is because as an alloy, the Alloy Incoloy 825 Sheet offers good mechanical properties at both room as well as elevated temperature settings where the heat could rise up to approximately 1000°F.


Specification of Incoloy 825 Plate

Grade INCOLOY 825 (42 Ni/22 Cr/3 Mo) - ASTM B424 UNS N08825, ASME SB424, MSRR, AMS, BS
Type Clad Plate, Rolling Plate, Flat Shim, Plain Sheet, Rolling Sheet Rolls, Foils, Coils, Plate, Strip, Sheet, Flats, Blank (Circle), ,Flat Sheet, Shim Sheet, soft annealed, descaled, sheared, annealed, Checker Plate, tread plate
ASTM B424 Alloy 825 Plate surface Hot rolled plate (HR), Cold rolled sheet (CR), No.1 finish hot rolled ASTM B424 Alloy 825 Plate, BA, No.3, No.4, No.6, No.1, No. 2D, No. 2B, BA NO(8), No.7, 2B, 2D, SATIN (Met with Plastic Coated), 2B, 1D, No.4, 8K, BA, hairline, brush, satin, mirror etc.
ASTM B424 Alloy 825 Plate Length 0-12mm or as required
Alloy Incoloy 825 Plate Thickness 0.3 to 1200 mm or as required
825 Inconel Plate Width 0-2500mm or as required
UNS N08825 Incoloy 825 Plate Process Hot/ Cold Rolled

 

Other Useful Information of Incoloy 825 Plate for buyers

ASTM B424 Alloy 825 Plate, Sheet and Strip
ASTM B 424, BS 3073NA16, ASME SB 424, ASME SB 906, DIN 17750, VdTÜV 432, ISO 6208, ASTM B 906, BS 3072NA16
Incoloy 825 Plate standards and approvals
  • ASTM A 480
  • ISO 15510
  • EN ISO 18286
  • EN 10088-1
  • EN 10051
  • ASTM A 959
  • EN ISO 9445
  • ASME IID
Tolerances of width and thickness
  • EN 10151 ASTM B424 Alloy 825 strip for springs
  • EN 10258 (formerly DIN 59381)
  • EN 10088 ASTM B424 Alloy 825 strip (general)
UNS N08825 Plate Hardness Half Hard, Soft, Spring Hard, Quarter Hard, Hard ASTM B424 Alloy 825 Sheet suppliers
Availability of ASTM B424 Alloy 825 Foil sizes
  • Width: Up to 500 mm (19.5 in)
  • Thickness : 8-100 microns (0.00031-0.004 in)
  • Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns.
Standard ASTM B424 Alloy 825 Plate & Sheet Sizes

1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm

  • Hot rolled 825 Inconel Plate 3.0–10.0 mm
  • Cold rolled 825 Inconel Plate 0.5-6.4 mm
Plasma profiles As per customer's drawings
Profiling

To provide a full profiling service in India we use numerous profiling methods including:

  • Plasma Plate Cutting
  • Oxy-propane Flame Cutting
  • Laser Plate Cutting
Value added services for ASTM B424 Alloy 825 Coil
  • Blanking
  • Slitting
  • Cut-to-length
  • Polishing
Manufacturer & exporter of
  • Alloy Incoloy 825 Clad plate: Alloy Incoloy 825 Clad plate is a composite steel plate made by bonding UNS N08825 Incoloy 825 plate, etc.
  • 825 Inconel Sheet: material under 3/16" [5.00 mm] in thickness and 24" [601 mm] and over in width;
  • ASTM B424 Alloy 825 Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width;
  • ASTM B424 Alloy 825 Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [601 mm] in width.
Value added services for ASTM B424 Alloy 825 Plate Waterjet cutting, Laser cutting, Bending and mechanical processing, Plasma cutting, welding, edge preparation, sawing and shearing.
Incoloy 825 Plate Origin European Origin, Indian Origin, Japanese Origin
Test SGS testing, UT, TUV etc
Why buy ASTM B424 Alloy 825 Plate from Metal Tube Industries?
  • Mill Test Certificate is supplied with shipment.
  • Free sample
  • EN 10204 3.1
  • Minimum Nitrogen content and Ferrite Count Test
  • Free quote
  • NABL Approved Lab Reports
  • Tested to ASTM A923 Method "C" or ASTM G48 Method "A".
  • Any third party inspection is accepted.
Packing of Incoloy 825 Plate Bundles with waterproof cloth outside or plywood box

 


Alloy 825 Plate Price in India

Price list of Incoloy 825 Plate in India UNS N08825 Incoloy 825 Plate Price in India (INR) per unit 825 Inconel Plate Price in UK Pound sterling Alloy Incoloy 825 Plate Price in UAE Dirham

Incoloy Alloy 825 Hot Rolled Plate (Ni-41.8%, Cr-23.2%, Mo-3.20% Fe-27.5%) 2000mm X 6000mm X 10mm Thick

INR 1,418 15.29 UK Pound sterling 73.37 UAE Dirham

This is an approximate Cost of 825 Inconel Sheet in India. For factory price buy directly from Incoloy 825 Plate manufacturers in India, check latest ASTM B424 Alloy 825 Plate price list & stock sizes please mail us.

 

What is Incoloy 825 Plate?

The primary chemical constituents of Incoloy 825 Nickel Alloy Slitting Coil consists of elements such as nickel, iron and chromium. Apart from these alloyants the Incoloy UNS No 8825 4mm Thick Plate also comes with additions of elements molybdenum, copper and titanium. These added alloyants give the Alloy 825 Incoloy Flat Plate its characteristics.  For instance, nickel added in the chemical composition of the Incoloy 825 Nickel Clad Plate has been designed to provide the alloy exceptional resistance to many corrosive medium containing environments.

 

Types of Incoloy 825 Plate

ASTM B424 Alloy 825 Precision Strip
ASTM B424 Alloy 825 Precision Strip
Alloy Incoloy 825 Strip Tape
Alloy Incoloy 825 Strip Tape
825 Inconel Shim Sheet
825 Inconel Shim Sheet
ASTM B424 Alloy 825 Perforated Sheet
ASTM B424 Alloy 825 Perforated Sheet
825 Inconel Plate
825 Inconel Plate
ASTM B424 Alloy 825 Sheet
ASTM B424 Alloy 825 Sheet
UNS N08825 Incoloy 825 Foil
UNS N08825 Incoloy 825 Foil
Alloy Incoloy 825 Coil
Alloy Incoloy 825 Coil
Incoloy 825 Rolling Plate
Incoloy 825 Rolling Plate
Alloy Incoloy 825 Polished Plate
Alloy Incoloy 825 Polished Plate
825 Inconel Quarto Plate
825 Inconel Quarto Plate
ASTM B424 Alloy 825 Flat Sheet
ASTM B424 Alloy 825 Flat Sheet
2.4858 Incoloy 825 Hot Rolled Plate
2.4858 Incoloy 825 Hot Rolled Plate
Incoloy 825 Din 2.4858 Cold Rolled Sheet
Incoloy 825 Din 2.4858 Cold Rolled Sheet
Inconel Alloy 825 Checker Plate
Inconel Alloy 825 Checker Plate
Incoloy 825 Nickel Alloy Cold Rolled Plate
Incoloy 825 Nickel Alloy Cold Rolled Plate
UNS N08825 Incoloy 825 Chequered Plate
UNS N08825 Incoloy 825 Chequered Plate
Alloy 825 Nickel Clad Plate
Alloy 825 Nickel Clad Plate
Alloy Incoloy 825 Shim Stock
Alloy Incoloy 825 Shim Stock
Incoloy 825 Superalloy Mesh Plate
Incoloy 825 Superalloy Mesh Plate

 

Ready Stock of Alloy Incoloy 825 Plate

we stock following Types of Incoloy 825 Plate:

825 Inconel Plate UNS N08825 Incoloy 825 Rolling Plate
ASTM B424 Alloy 825 Chequered Plate Alloy Incoloy 825 Quarto Plate
UNS N08825 Incoloy 825 Cold Rolled Plate Alloy Incoloy 825 Bbq Plate
Alloy Incoloy 825 Hot Rolled Plate ASTM B424 Alloy 825 Perforated Plate
Inconel Alloy 825 Custom Cut Plate Incoloy 825 Nickel Alloy Sheet
Incoloy 825 Nickel Alloy Embossed Plate 825 Inconel Plasma Cutting Plate
Alloy Incoloy 825 Plate Mill Finish Incoloy 825 Din 2.4858 Thin Plate
ASTM B424 Alloy 825 Plate 2b Finish Alloy 825 Nickel Diamond Plate
Incoloy 825 Alloy Checker Plate 2.4858 Alloy 825 Polished Plate
2.4858 Incoloy 825 Checkered Plate ASTM B424 Alloy 825 Laser Cut Plate
Incoloy 825 Superalloy 1/4 Inch Plate 2.4858 Incoloy 825 Perforated Sheet
Incoloy 825 Grade 10mm Plate Inconel Alloy 825 Cold Rolled Sheet
2.4858 Alloy 825 Plate Brushed Finish Incoloy 825 Superalloy Hot Rolled Sheet
UNS N08825 Alloy 825 Plate Mirror Finish Incoloy 825 Grade Chequered Plate
Incoloy 825 Din 2.4858 Chequer Plate UNS N08825 Alloy 825 Tread Plate
Alloy 825 Nickel Clad Plate Incoloy 825 Alloy Tisco Plate

 

UNS N08825 Incoloy 825 Plate density

UNS N08825 Incoloy 825 Plate density
  • lb/in3 : 0.294
  • Mg/m3 : 8.14

 

ASTM B424 Alloy 825 Plate melting range

ASTM B424 Alloy 825 Plate melting range
  • °F : 2500-2550
  • °C :1370-1400

 

Size chart of 825 Inconel Plate

Stocked Sizes

Size in inches

Alloy 825 Plate/ Sheet

Size in mm
.125 Incoloy 825 Plate, Incoloy 825 Perforated Plate, Incoloy 825 Sheet 3.18
.134 Incoloy 825 Coil, Incoloy 825 Plate, Incoloy 825 Strips 3.40
.156 Incoloy 825 Plate, Incoloy 825 Perforated Plate, Incoloy 825 Sheet 3.96
.187 Incoloy 825 Plate, Incoloy 825 Sheet, Incoloy 825 Rolling Plate 4.75
.250 Incoloy 825 Plate, Incoloy 825 Rolling Sheets, Incoloy 825 Sheet 6.35
.312 Incoloy 825 Plate, Incoloy 825 Perforated Plate, Incoloy 825 Sheet 7.92
.375 Incoloy 825 Plate, Incoloy 825 Rolling Plate, Incoloy 825 Sheet 9.53
.500 Incoloy 825 Plate, Incoloy 825 Sheet, Incoloy 825 Clad Plate 12.7
.625 Incoloy 825 Plate, Incoloy 825 Flat Shim, Incoloy 825 Sheet 15.9
.750 Incoloy 825 Plate, Incoloy 825 Sheet, Incoloy 825 Strips 19.1
.875 Incoloy 825 Plate, Incoloy 825 Rolling Sheets, Incoloy 825 Sheet 22.2
1 Incoloy 825 Plate, Incoloy 825 Flat Shim, Incoloy 825 Sheet 25.4
1.125 Incoloy 825 Plate, Incoloy 825 Sheet, Incoloy 825 Clad Plate 28.6
1.250 Incoloy 825 Plate, Incoloy 825 Sheet, Incoloy 825 Strips 31.8
1.500 Incoloy 825 Plate, Incoloy 825 Rolling Plate, Incoloy 825 Sheet 38.1
1.750 Incoloy 825 Plate, Incoloy 825 Sheet, Incoloy 825 Clad Plate 44.5
2 Incoloy 825 Plate, Incoloy 825 Clad Plate, Incoloy 825 Sheet 50.8
2.500 Incoloy 825 Plate, Incoloy 825 Flat Shim, Incoloy 825 Sheet 63.5
3 Incoloy 825 Plate, Incoloy 825 Rolling Sheets, Incoloy 825 Sheet 76.2

Dimensions: widths 1000/1220/1500 mm, lengths 2000/2500/3000 mm.

 

Weight per Unit of Alloy 825 Inconel Plate

825 Inconel Sheet Weight & Density

Thickness Alloy Plate Weight per Unit Area Density
3/16 inches Incoloy 825 0.06000 lbs/in²42.184176 kg/m² 0.315 lbs/in³8.72 g/cm³
1/4 inches Incoloy 825 0.08 lbs/in²56.245568 kg/m² 0.315 lbs/in³8.72 g/cm³
3/8 inches Incoloy 825 0.121 lbs/in²85.0714216 kg/m² 0.315 lbs/in³8.72 g/cm³
1/2 inches Incoloy 825 0.161 lbs/in²113.1942056 kg/m² 0.315 lbs/in³8.72 g/cm³
5/8 inches Incoloy 825 0.196 lbs/in²137.8016416 kg/m² 0.315 lbs/in³8.72 g/cm³
3/4 inches Incoloy 825 0.235 lbs/in²165.221356 kg/m² 0.315 lbs/in³8.72 g/cm³
7/8 inches Incoloy 825 0.274 lbs/in²192.6410704 kg/m² 0.315 lbs/in³8.72 g/cm³
1 inches Incoloy 825 0.313 lbs/in²220.0607848 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/4 inches Incoloy 825 0.391 lbs/in²274.9002136 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/2 inches Incoloy 825 0.47 lbs/in²330.442712 kg/m² 0.315 lbs/in³8.72 g/cm³
1 3/4 inches Incoloy 825 0.549 lbs/in²385.9852104 kg/m² 0.315 lbs/in³8.72 g/cm³
2 inches Incoloy 825 0.627 lbs/in²440.8246392 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/4 inches Incoloy 825 0.705 lbs/in²495.664068 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/2 inches Incoloy 825 0.784 lbs/in²551.2065664 kg/m² 0.315 lbs/in³8.72 g/cm³
2 3/4 inches Incoloy 825 0.862 lbs/in²606.0459952 kg/m² 0.315 lbs/in³8.72 g/cm³
3 inches Incoloy 825 0.941 lbs/in²661.5884936 kg/m² 0.315 lbs/in³8.72 g/cm³

 

Dimensions of Incoloy 825 Plate

ASTM B424 Alloy 825 Plate Imperial Dimensions

Plate Surface finish Gauge (in) Width (max in)
2B – Cold rolled, heat treated, pickled, skin passed Plate 10–24 72*
2D – Cold rolled, heat treated, pickled plate 12–24 60
BA Mexinox only 18–28 48
Polished plate (not brushed) 11–24 60
Temper rolled plate Mexinox only 13–29 48

ASTM B424 825 Alloy Plate Metric Dimensions

Plate Surface finish Thickness (mm) Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate 0.25–8.0 2032
2D – Cold rolled, heat treated, pickled plate 0.4–6.35 1524
2E – Cold rolled, heat treated, mechanically descaled plate 0.4–8.0 2032
2R – Cold rolled, bright annealed plate 0.25–3.5 1524
2H – Work hardened plate 0.4–6.35 1524
Polished, brushed plate 0.5–4.0 1524

 

Difference between Incoloy 825 Plate, Sheet, & Foil

  • Thickness greater than 0.15 mm and less than 6.35mm is called a Incoloy 825 Sheet.
  • Thickness greater than 6.35 mm is called a Incoloy 825 Plate.
  • Thickness less than 0.15mm is called a Incoloy 825 Foil.

 

UNS N08825 AMS 5542 Alloy 825 Nickel Sheet & Plate Stock List

Alloy Product form Dimension
ALLOY 825 (42 Ni/22 Cr/3 Mo) Strip; cold rolled, hard 0.40x5 mm x coil, 0.016 kg/m
INCOLOY 825 (42 Ni/22 Cr/3 Mo) Strip; cold rolled, hard rolled, special temper 0.40x25 mm x coil, 0.007 kg/m
INCOLOY 825 (42 Ni/22 Cr/3 Mo) Strip; cold rolled, hard 0.50x5 mm x coil, 0.02 kg/m
ALLOY 825 (42 Ni/22 Cr/3 Mo) Strip; cold rolled, bright anneal, clean spool 0.60x5 mm x spool, 0.02 kg/m
INCOLOY 825 (42 Ni/22 Cr/3 Mo) Strip; cold rolled, hard rolled, special temper 0.60x25 mm x coil, 0.011 kg/m
INCOLOY 825 (42 Ni/22 Cr/3 Mo) Sheet; cold rolled, annealed 0.5x914.4 mm x coil, 3.587 kg/m
INCOLOY 825 (42 Ni/22 Cr/3 Mo) Sheet; cold rolled, annealed 0.6x1219 mm x coil, 5.95 kg/m
INCOLOY 825 (42 Ni/22 Cr/3 Mo) Sheet; cold rolled, annealed, bellows quality 0.7x1219 mm x coil, 6.70 kg/m
INCOLOY 825 (42 Ni /22Cr/3 Mo) Sheet; cold rolled, annealed 0.8x1220 mm x coil, 7.76 kg/m
INCOLOY 825 (42 Ni/22 Cr/3 Mo) Sheet; cold rolled, annealed 1.0x1219 mm x coil, 9.5 kg/m
INCOLOY 825 (42 Ni/22 Cr/3 Mo) Sheet; cold rolled, pickled, annealed 1.6x1200x3000 mm, 46.4 kg/pc
INCOLOY 825 (42 Ni/22 Cr/3 Mo) Sheet; cold rolled, pickled, annealed 2.0x1200x3000 mm, 60.15 kg/pc
INCOLOY 825 (42 Ni/22 Cr/3 Mo) Sheet; cold rolled, soft annealed,descaled, sheared 3.0x1200x3000 mm, 88.5 kg/pc
ALLOY 825 (42 Ni/22 Cr/3 Mo) Plate; hot rolled, soft annealed, descaled, sheared 4.0x2440x6000 mm, 482 kg/pc
INCOLOY 825 (42 Ni/22 Cr/3 Mo) Plate; hot rolled, descaled, annealed 5.0x2000x6000 mm, 539 kg/pc
ALLOY 825 (42 Ni/22 Cr/3 Mo) Strip; cold rolled, hard 1.0x5 mm x coil, 0.039 kg/m
ALLOY 825 (42 Ni/22 Cr/3 Mo) Plate; hot rolled, descaled, annealed 18.0x260x260 mm, 9.9 kg/pc


UNS N08825 Incoloy 825 Plate Properties

Chemical Composition of ASTM B424 Alloy 825 Plate

Grade C Mn Si S Cu Fe Ni Cr Al Ti
825 0.05 max 1.00 max 0.5 max 0.03 max 1.50 – 3.00 22.00 min 38.00 – 46.00 19.50 – 23.50 0.02 max 0.06 – 1.20

 

ASTM B424 Alloy 825 Plate Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
825 8.14 g/cm3 1400 °C (2550 °F) Psi – 80,000 , MPa – 550 Psi – 32,000 , MPa – 220 30 %


 

Equivalent Grades of Incoloy 825 Plate

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 825 2.4858 N08825 NCF 825 NA 16 ЭП703 NFE30C20DUM NiCr21Mo XH38BT

 

Difference Between Inconel and Incoloy

Incoloy

Incoloy refers to a range of superalloys produced by the Special Metals Corporation group of companies.

Incoloy Compositions (percentages)

Alloy name Balance
metal
Chro
mium
Alu
minum
Tita
nium
Carbon Yttrium oxide Copper Man
ganese
Cobalt Nickel Phos
phorus
Silicon Sulphur Moly
bdenum
Nb
+Ti
020 Fe (~40%) 20 n/p n/p <0.07 n/p 3.5 <2.0 n/p 35 <0.045 <1.0 <0.035 2.5 about 1
DS Fe (~40%) 18 n/p 0.2 0.1 nil 0.5 0.8-1.5 18 (Co+
Ni
38)
18 (Co+
Ni
38)
n/p 2.3 0.03
MA956 Fe (~75%) 20 4.75 0.4 <0.1 0.5 <0.15 <0.3 <0.3 <0.5 <0.02 n/p n/p

 

Inconel

Inconel is a family of austenitic nickel-chromium-based superalloys.

Inconel Composition

Inconel Element (% by mass)
Ni Cr Fe Mo Nb Co Mn Cu Al Ti Si C S P B
601 72.0 14.0–17.0 6.0–10.0 1.0 0.5 0.5 0.15 0.015
617 44.2–56.0 20.0–24.0 3.0 8.0–10.0 10.0–15.0 0.5 0.5 0.8–1.5 0.6 0.5 0.15 0.015 0.015 0.006
601 58.0 20.0–23.0 5.0 8.0–10.0 3.15–4.15 1.0 0.5 0.4 0.4 0.5 0.1 0.015 0.015
690 59.5 30 9.2 0.35 0.01 0.02 0.35 0.019 0.003
718 50.0–55.0 17.0–21.0 balance 2.8–3.3 4.75–5.5 1.0 0.35 0.2–0.8 0.65–1.15 0.3 0.35 0.08 0.015 0.015 0.006
X-750 70.0 14.0–17.0 5.0–9.0 0.7–1.2 1.0 1.0 0.5 0.4–1.0 2.25–2.75 0.5 0.08 0.01

 

Incoloy 825 plate uses

  • Hot vessels for food, water, and seawater
  • Pickling tank heaters, tanks, and equipment
  • Nuclear fuel reprocessing
  • Radioactive waste handling
  • Oil and gas recovery
  • Marine exhaust systems
  • Acid production
  • Pollution control
  • Calorifiers
  • Chemical processing

 

Alloy 825 Plate Features

  • Very resistant to sulfuric and phosphoric acids
  • Good resistance to stress-corrosion cracking
  • Excellent resistance to reducing and oxidizing acids
  • Permission for pressure-vessel use at wall temperatures up to 800°F
  • Good mechanical properties at both room and elevated temperatures up to approximately 1000°F
  • Satisfactory resistance to localized attack like pitting and crevice corrosion

 

Check our clientele of Incoloy 825 plate in following States

West Bengal
Gujarat
Bihar
Kerala
Noida
 Tamil Nadu
Maharashtra
Karnataka
Andhra Pradesh
Uttar Pradesh
Delhi
Jharkhand

 

We are one of favourite supplier of Incoloy 825 Sheet in following countries

Bahrain
Oman
United Arab Emirates
Kuwait
Iraq
Saudi Arabia(KSA)
Qatar

 

Accept all small/ Large Orders of Alloy 825 Inconel Strip Tape, stockholder of Incoloy 825 Nickel Alloy Slitting Coil in India. wholesaler of Incoloy 825 Nickel Clad Plate in Mumbai, manufacturers of Alloy 825 Incoloy Flat Plate
Held wide stock of Incoloy 8825 Polish Plate, stockist of inconel 825 plate, traders of Inconel 825 sheet, Incoloy UNS No 8825 4mm Thick Plate dealer.