Inconel 600 plate

buy Cut to size Alloy Inconel 600 Sheet manufacturer in India, UNS N06600 Inconel 600 Strip, Inconel 600 plate suppliers

Manufacturer of Alloy Inconel 600 Coil, Inconel 600 Steel Plates, high quality JIS NCF 600 Plate, 2.4816 Inconel 600 Foil stockist in Mumbai, India, check Inconel Alloy 600 Plate Price in India.

Belonging to the austenitic grade category of metals, the Inconel 600 Cold Rolled Plate  is often referred to as a super alloy. Also known as Inconel N06600 4mm Thick Plate or Alloy 600 thick plate has nonmagnetic properties. This nickel – chromium based Inconel 600 Alloy Polished Plate possesses an excellent combination of valuable properties.

Table Of Content

Check Alloy 600 UNS N06600 Shim Sheet Price List, high quality 2.4816 Alloy 600 Sheet supplier, Inconel 600 UNS N06600 Hot Rolled Plate importer in India, Nickel Alloy 600 Strip manufacturers used for aerospace sectors

For instance, the properties of the  Inconel UNS No 6600 Shim Stock produced at our factory include high tensile strength and resistance to ordinary form of corrosion along with the ability to be hot and cold worked. This Alloy 600 Nickel Flat Plate also displays good resistance to heat as well as freedom from aging or from stress related corrosion, throughout the annealed to heavily cold worked range condition. This is true especially in cases where the metal is exposed to conditions that contain chloride ions thereby leaving conventional steel classes vulnerable to issues such as chloride ion stress corrosion cracking.

As is typical of Inconel alloys, the UNS N06600 Inconel 600 Strip too is known to be  an oxidation corrosion resistant material. This is why the metal is well suited for applications or for service in those environments, where the metal has been subjected to extreme pressure and heat or temperature. When heated, Alloy 600 UNS N06600 Shim Sheet forms a thick, stable, passivating oxide on its surface. This layer formed on the surface of the metal protects the surface from further attack. Since, Inconel Alloy 600 Inconel Clad Plate tends to retain its good tensile strength over a wide temperature range, the metal is deemed attractive for high temperature applications by many clients; where metals such as aluminium or conventional steel grades would succumb to creep, which is a result of thermally induced crystal vacancies

Hence, inconel 600 plate suppliers in uae too recommend its use in those sectors, where the metal is to be exposed in high temperature environment settings. The high temperature tensile strength of Inconel 600 Plate has been developed by manufacturers who treat the metal to a solid solution strengthening process or a precipitation hardening process.The high chromium content present in Inconel 600 Hot Rolled Plate raises the oxidation resistance of the alloy considerably higher, which is in comparison to that of pure nickel. While the higher content of nickel, which is a primary alloyant in the Alloy Inconel 600 Sheet is known to provide good resistance to corrosion, even under conditions which contain reductive chemicals.

As the alloy 2.4816 Inconel 600 Foil exhibits high levels of resistance to stress and salt water, exhaust gases, as well as to most organic acids and compounds, many industries prefer using this metal. Alloy Inconel 600 Coil is also known for its carburization resistance property, although Inconel 600 tends to be vulnerable and gets attacked in the presence of sulfur. Nickel Alloy 600 Strip is a general purpose material used for structural engineering, which requires metals that could be subjected to elevated temperatures where properties such as high tensile strength, stability, and durability are considered to be important.

At Metal Tube Industries, we manufacture and produce 600 Inconel Strip Tape, strip, coil, sheets etc. We are also one of the largest Inconel 600 plate suppliers  in India as well as globally.

Compare inconel 600 plate price with inconel 625 plate price list in india

 

---

Price list of Inconel 600 Plate in India	UNS N06600 Inconel 600 Plate Price in India (INR) per unit	600 Inconel Plate Price in UK Pound sterling	Alloy Inconel 600 Plate Price in UAE Dirham
Inconel Alloy 600 Plate 70mm Thk As Per Sb 168 Uns No6600, 2400mm X 2400mm Long(Hot Rolled)	INR 1,514	16.01 UK Pound sterling	77.20 UAE Dirham

This is an approximate Cost of 600 Inconel Sheet in India. For factory price buy directly from Inconel 600 Plate manufacturers in India, check latest ASTM B168 Alloy 600 Plate price list & stock sizes please mail us.

 

---

Type	Foils, Coils, Plate, Strip, Sheet, Flats, Clad Plate, Rolling Plate, Flat Shim, Plain Sheet, Rolling Sheet Rolls, Blank (Circle), ,Flat Sheet, Shim Sheet, soft annealed, descaled, sheared, annealed, Checker Plate, tread plate
ASTM B168 Alloy 600 Plate surface	BA, No.3, No.4, No.6, No.1, No. 2D, No. 2B, BA NO(8), No.7, 2B, 2D, Hot rolled plate (HR), Cold rolled sheet (CR), No.1 finish hot rolled ASTM B168 Alloy 600 Plate, SATIN (Met with Plastic Coated), 2B, 1D, No.4, 8K, BA, hairline, brush, satin, mirror etc.
ASTM B168 Alloy 600 Plate Length	0-12mm or as required
Alloy Inconel 600 Plate Thickness	0.3 to 1200 mm or as required
600 Inconel Plate Width	0-2500mm or as required
UNS N06600 Inconel 600 Plate Process	Hot/ Cold Rolled

 

Other Useful Information of Inconel 600 Plate for buyers

ASTM B168 Alloy 600 Plate, Sheet and Strip	ASTM B168 UNS N06600, ASME SB168 Inconel 600 Plate, Sheet and Strip - ASTM B 906/ASME SB 906, ASTM B 168/ASME SB 168, SAE/AMS 5540, ASME Code Cases 1827 and N-253, DIN 17750, EN 10095, MIL-DTL-23228, ISO 6208, BS 3072NA14 and 3073NA14
Inconel 600 Plate standards and approvals	ASTM A 480 ISO 15510 EN ISO 18286 EN 10088-1 EN 10051 ASTM A 959 EN ISO 9445 ASME IID
Tolerances of width and thickness	EN 10151 ASTM B168 Alloy 600 strip for springs EN 10258 (formerly DIN 59381) EN 10088 ASTM B168 Alloy 600 strip (general)
UNS N06600 Plate Hardness	Half Hard, Soft, Spring Hard, Quarter Hard, Hard ASTM B168 Alloy 600 Sheet suppliers
Standard ASTM B168 Alloy 600 Plate & Sheet Sizes	1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm Hot rolled 600 Inconel Plate 3.0–10.0 mm Cold rolled 600 Inconel Plate 0.5-6.4 mm
Availability of ASTM B168 Alloy 600 Foil sizes	Width: Up to 500 mm (19.5 in) Thickness : 8-100 microns (0.00031-0.004 in) Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns.
Plasma profiles	As per customer's drawings
Profiling	To provide a full profiling service in India we use numerous profiling methods including: Plasma Plate Cutting Oxy-propane Flame Cutting Laser Plate Cutting
Value added services for ASTM B168 Alloy 600 Coil	Blanking Slitting Cut-to-length Polishing
Value added services for ASTM B168 Alloy 600 Plate	Waterjet cutting, Laser cutting, Bending and mechanical processing, Plasma cutting, welding, edge preparation, sawing and shearing.
Inconel 600 Plate Origin	European Origin, Indian Origin, Japanese Origin
Manufacturer & exporter of	Alloy Inconel 600 Clad plate: Alloy Inconel 600 Clad plate is a composite steel plate made by bonding UNS N06600 Inconel 600 plate, etc. 600 Inconel Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width; ASTM B168 Alloy 600 Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width; ASTM B168 Alloy 600 Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width.
Test	SGS testing, UT, TUV etc
Packing of Inconel 600 Plate	Bundles with waterproof cloth outside or plywood box
Why buy ASTM B168 Alloy 600 Plate from Metal Tube Industries?	Mill Test Certificate is supplied with shipment. Free sample EN 10204 3.1 Minimum Nitrogen content and Ferrite Count Test Free quote NABL Approved Lab Reports Tested to ASTM A923 Method "C" or ASTM G48 Method "A". Any third party inspection is accepted.

Now Stocking 600-LCF (Low Cycle Fatigue) Plates:

• Available in thickness from .031" nom. to .078" nom.
• This material is Vacuum Induction Melted - Electroslag Remelted, Type 1

 

---

Belonging to the austenitic grade category of metals, the Inconel 600 Cold Rolled Plate  is often referred to as a super alloy. Also known as Inconel N06600 4mm Thick Plate or Alloy 600 thick plate has nonmagnetic properties. This nickel – chromium based Inconel 600 Alloy Polished Plate possesses an excellent combination of valuable properties. This Alloy 600 Nickel Flat Plate also displays good resistance to heat as well as freedom from aging or from stress related corrosion, throughout the annealed to heavily cold worked range condition.

 

---

 

---

UNS N06600 Inconel 600 Plate density

304 lb/in3

Specific Heat Btu/lb °F
0.11

 

---

ASTM B168 Alloy 600 Plate melting range

2470-2575°F

 

---

we stock following Types of Inconel 600 Plate:

Alloy Inconel 600 Hot Rolled Plate	ASTM B168 Alloy 600 Perforated Plate
Alloy Inconel 600 Plate Mill Finish	Inconel 600 Din 2.4816 Thin Plate
ASTM B168 Alloy 600 Plate 2b Finish	Alloy 600 Nickel Diamond Plate
600 Inconel Plate	UNS N06600 Inconel 600 Rolling Plate
ASTM B168 Alloy 600 Chequered Plate	Alloy Inconel 600 Quarto Plate
UNS N06600 Inconel 600 Cold Rolled Plate	Alloy Inconel 600 Bbq Plate
Inconel 600 Alloy Checker Plate	2.4816 Alloy 600 Polished Plate
UNS N06600 Alloy 600 Plate Mirror Finish	Inconel 600 Grade Chequered Plate
Inconel 600 Din 2.4816 Chequer Plate	UNS N06600 Alloy 600 Tread Plate
Alloy 600 Nickel Clad Plate	Inconel 600 Alloy Tisco Plate
Inconel Alloy 600 Custom Cut Plate	Inconel 600 Nickel Alloy Sheet
Inconel 600 Nickel Alloy Embossed Plate	600 Inconel Plasma Cutting Plate
2.4816 Inconel 600 Checkered Plate	ASTM B168 Alloy 600 Laser Cut Plate
Inconel 600 Superalloy 1/4 Inch Plate	2.4816 Inconel 600 Perforated Sheet
2.4816 Alloy 600 Plate Brushed Finish	Inconel 600 Superalloy Hot Rolled Sheet
Inconel 600 Grade 10mm Plate	Inconel Alloy 600 Cold Rolled Sheet

 

---

Stocked Sizes
Size (in inches)	Size (in mm)
.125"	3.18mm
.134"	3.40mm
.156"	3.96mm
.187"	4.75mm
.250"	6.35mm
.312"	7.92mm
.375"	9.53mm
.500"	12.7mm
.600"	15.9mm
.750"	19.1mm
.875"	22.2mm
1"	25.4mm
1.125"	28.6mm
1.250"	31.8mm
1.500"	38.1mm
1.750"	44.5mm
2"	50.8mm
2.500"	63.5mm
3"	76.2mm

Dimensions: widths 1000/1220/1500 mm, lengths 2000/2500/3000 mm.

 

---

ASTM B168 Alloy 600 Plate Imperial Dimensions

Plate Surface finish	Gauge (in)	Width (max in)
2B – Cold rolled, heat treated, pickled, skin passed Plate	10–24	72*
2D – Cold rolled, heat treated, pickled plate	12–24	60
BA Mexinox only	18–28	48
Polished plate (not brushed)	11–24	60
Temper rolled plate Mexinox only	13–29	48

ASTM B168 600 Alloy Plate Metric Dimensions

Plate Surface finish	Thickness (mm)	Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate	0.25–8.0	2032
2D – Cold rolled, heat treated, pickled plate	0.4–6.35	1524
2E – Cold rolled, heat treated, mechanically descaled plate	0.4–8.0	2032
2R – Cold rolled, bright annealed plate	0.25–3.5	1524
2H – Work hardened plate	0.4–6.35	1524
Polished, brushed plate	0.5–4.0	1524

 

in a variety of thicknesse available shown below:

0.5 mm 0.6 mm 0.8 mm 1.0 mm 1.2 mm 1.5 mm 1.6 mm 1.8 mm 2.0 mm 3.0 mm

4.0 mm 5.0 mm 6.0 mm 8.0 mm 10.0 mm 12.0 mm 15.0 mm 20.0 mm 25.4 mm

 

---

Alloy	Product form	Dimension
INCONEL 600 (75 Ni/16 Cr)	Strip; cold rolled, annealed	0.10x150 mm x coil, 0.12 kg/m
ALLOY 600 (75 Ni/16 Cr)	Strip; cold rolled, annealed	0.40x200 mm x coil, 0.7 kg/m
INCONEL 600 (75 Ni/16 Cr)	Sheet; cold rolled, annealed	0.4x914.4 mm x coil, 3.03 kg/m
INCONEL 600 (75 Ni/16 Cr)	Sheet; cold rolled, annealed	0.5x1000 mm x coil, 4.14 kg/m
INCONEL 600 (75 Ni/16 Cr)	Sheet; cold rolled, annealed	0.7x1000x2000 mm, 13.25 kg/pc
INCONEL 600 (75 Ni/16 Cr)	Sheet; cold rolled, annealed	0.8x1219 mm x coil, 8.1 kg/m
ALLOY 600 (75 Ni/16 Cr)	Sheet; cold rolled, annealed	1.0x1220 mm x coil, 10.10 kg/m
INCONEL 600 (75 Ni/16 Cr)	Sheet; cold rolled, annealed	1.2x1200x3000 mm, 37.8 kg/pc
INCONEL 600 (75 Ni/16 Cr)	Sheet; cold rolled, pickled, annealed	1.6x1220x3600 mm, 59 kg/pc
ALLOY 600 (75 Ni/16 Cr)	Sheet; cold rolled, annealed	2.0x1200x3000 mm, 62 kg/pc
INCONEL 600 (75 Ni/16 Cr)	Sheet; cold rolled, annealed, pickled	2.5x1200x3000 mm, 76 kg/pc
ALLOY 600 (75 Ni/16 Cr)	Sheet; cold rolled, soft annealed, descaled, sheared, tread plate, Checker Plate	3.0x1220x3000 mm, 92 kg/pc
ALLOY 600 (75 Ni/16 Cr)	Plate; hot rolled, annealed	4.0x1200x3000 mm, 122 kg/pc
ALLOY 600 (75 Ni/16 Cr)	Plate; hot rolled, annealed	5.0x2400x6000 mm, 606 kg/pc
ALLOY 600 (75 Ni/16 Cr)	Plate; hot rolled, soft annealed, descaled, sheared, tread plate, Checker Plate	6.0x2440x6000 mm, 746 kg/pc
INCONEL 600 (75 Ni/16 Cr)	Plate; hot rolled, descaled, annealed	8.0x2000x4000 mm, 564 kg/pce
ALLOY 600 (75 Ni/16 Cr)	Plate; hot rolled, soft annealed, descaled, sheared, tread plate, Checker Plate	10.0x2000x4000 mm, 726 kg/pc
ALLOY 600 (75 Ni/16 Cr)	Plate; hot rolled, soft annealed, descaled, sheared, tread plate, Checker Plate	12.0x2000x3000 mm, 616 kg/pc
INCONEL 600 (75 Ni/16 Cr)	Plate; hot rolled, annealed	20.0x915x1235 mm, 193 kg/pc

---

600 inconel Sheet Weight & Density

 

---

Chemical Composition of ASTM B168 Alloy 600 Plate

Grade	C	Mn	Si	S	Cu	Fe	Ni	Cr
Inconel 600	0.15 max	1.00 max	0.50 max	0.015max	0.50 max	6.00 – 10.00	72.00 min	14.00 – 17.00

 

ASTM B168 Alloy 600 Plate Mechanical Properties in annealed condition

 

---

 

---

• Thickness greater than 6.35 mm is called a Inconel 600 Plate.
• Thickness greater than 0.15 mm and less than 6.35mm is called a Inconel 600 Sheet.
• Thickness less than 0.15mm is called a Inconel 600 Foil.

 

---

Incoloy

Incoloy refers to a range of superalloys produced by the Special Metals Corporation group of companies.

Incoloy Compositions (percentages)

 

Inconel

Inconel is a family of austenitic nickel-chromium-based superalloys.

Inconel Composition

 

---

• Nuclear waste reprocessing equipment
• Aerospace equipment
• Jet Engine exhaust systems
• Motor racing exhaust systems
• Chimney Linings
• Chemical Processing
• Sour gas production tubes

 

---

• Excellent mechanical properties
• High strength and good weldability under a wide range of temperatures
• Non-magnetic
• Resistant to a wide range of corrosive media.
• Virtually immune to chlorine ion stress corrosion cracking

 

---

Andhra Pradesh	Uttar Pradesh	Delhi	Bihar
Gujarat	Maharashtra	Kerala	Noida
West Bengal	Tamil Nadu	Jharkhand	Karnataka

 

---

Qatar	Iraq	Saudi Arabia(KSA)	Oman
Kuwait	United Arab Emirates	Bahrain

 

Special price for 600 Inconel Strip Tape, Alloy 600 Inconel Clad Plate wholesaler in Mumbai. mirror finish ASME SB168 Inconel 6600 Cold Rolled Plate suppliers in India. Alloy 600 UNS N06600 Shim Sheet stockholder, Inconel 600 Alloy Polished Plate manufacturers for gas turbine components.

2B/ BA/ HL/ NO.1 Alloy 600 Nickel Flat Plate stockist, Ready Inconel UNS No 6600 Shim Stock traders, importer of Inconel 600 Din 2.4816 2D Plate. 2.4816 Inconel 600 Plate material dealer, Inconel N06600 4mm Thick Plate manufacturers in India.