inconel 718 plate

Accept all small/ Large Orders of ASTM B670 Inconel 718 Sheet, SB670 Inconel 718 Strip, inconel 718 plate suppliers, UNS N07718 Inconel 718 Foil manufacturer in India

Buy Certified & Tested 2.4668 Inconel 718 Coil, Alloy Inconel 718 Clad Plate stockist in Mumbai, India, Super Price Manufacturer of Inconel Alloy 718 Sheet material for aerospace, check ASTM B670 Alloy 718 Plate Price in India

The material used in the production of the specified Inconel 718 Nickel Alloy 2D Plate needs to conform to the chemical requirements. Chemically, the elements such as manganese, silicon, sulfur, phosphorus, copper,  columbium, chromium, carbon, cobalt, molybdenum, niobium, tantalum, titanium, aluminium, iron, nickel, and boron must be in tandem with the specification standard ASTM B670 .

Table Of Content

Specialise in distributing 2.4668 Alloy 718 Coil, Check 718 Inconel Strip Tape Price List, Inconel 718 Alloy Hot Rolled Plate manufacturers, Alloy 718 Inconel Shim Sheet importer in India, supplier of Inconel 718 Grade Flat Plate

After the precipitation hardening process, the material i.e. Inconel 718 Grade Flat Plate has to conform to the mechanical property requirements of the specification as well. According to the ASTM B670 specification, the   Inconel 718 Din 2.4668 Polished Plate must take into account requirements for tensile strength, yield strength, and elongation as well. Further a Stress rupture test too needs to be performed on the Alloy 718 Nickel Shim Stock  keeping in accordance to the herein ASTM documents referenced itemized.

Inconel 718 plate suppliers in Bangalore note that the alloy can be readily machined either in an annealed condition or an age hardened condition. Although depending on the application, the Inconel 718 plate suppliers in Chennai may recommend the technique to machine the alloy. To simplify, one must note the fact that in an age hardened condition, machining the Alloy 718 Inconel Shim Sheet tends to give a better surface finish. On the other hand machining a Inconel 718 Alloy Hot Rolled Plate in an annealed condition leads to a longer tool life.

The Alloy Inconel 718 Clad Plate could be welded either in an aged condition or in an annealed condition. Welding an age-hardened 718 Inconel Strip Tape material typically results in the formation of a softened heat affected area. Although the welding characteristics of Inconel 718 , especially its resistance to post weld cracking tends to be outstanding. Similar to other Inconel alloy grades, Inconel 718 plate, on heating the material forms an adhesive, yet self repairing passivated oxide layer on its surface. The room temperature strength of the ASTM B670 Inconel 718 Sheet can be substantially increased with the use of precipitation heat treatment method.

This nickel based UNS N07718 Inconel 718 Foil chemically contains significant contents of elements such as iron, columbium, and molybdenum, in addition to the trace quantity of alloying materials such as aluminium and titanium.  As a metal, Inconel 718 is an alloy which can maintain its high  tensile strength and good ductility properties, even in conditions or settings where the temperature can rise as high to  about 1300°F. Apart from having relatively good weldable properties, Inconel 718 plate suppliers note that this alloy has good formability, as well as excellent cryogenic properties in  comparison to other precipitation hardened nickel based alloys. Since the Inconel 718 Din 2.4668 Polished Plate does not undergo a ductile to brittle transformation phase, the alloy can be used in applications that include extreme temperature settings.

The sluggish precipitation hardening response of the 2.4668 Inconel 718 Coil allows the alloy to be readily welded without hardening or without cracking.  Another similarity between the other Inconel alloys and the ASTM B670 UNS N07718 Inconel Cold Rolled Plate is that they are non-magnetic in nature. Since the Inconel 718 alloy maintains good resistance to corrosion as well as superior resistance to oxidation, the SB670 Inconel 718 Strip can be used for parts requiring high resistance to not only creep but also stress rupture up to an elevated temperature of 1300°F and oxidation resistance up to a temperature range as high as 1800°F .

compare properties of inconel 718 plate with inconel 625 plate

 

---

The specification for ASTM B670 is a standard which  takes into account rolled precipitation hardened nickel based alloy Inconel 718. This particular standard covers components such as sheets, ASTM B670 Alloy 718 Plate as well as strip.Components in this specification, for instance say the ASTM B670 UNS N07718 Inconel Cold Rolled Plate is generally manufactured in an annealed condition or temper.The specified ASTM B670 component Inconel 718 UNS N07718 Plate material has been designed for high temperature setting applications.

 

---

Shape	Specifications
Plate	AMS 5596 AMS 5597 GE B50TF14 ASTM B-670

 

Type	Foils, Coils, Plate, Strip, Sheet, Flats, Clad Plate, Rolling Plate, Flat Shim, Plain Sheet, Rolling Sheet Rolls, Blank (Circle), ,Flat Sheet, Shim Sheet, soft annealed, descaled, sheared, annealed, Checker Plate, tread plate
Alloy Inconel 718 Plate Thickness	0.3 to 1200 mm or as required
718 Inconel Plate Width	0-2500mm or as required
ASTM B670 Alloy 718 Plate Length	0-12mm or as required
ASTM B670 Alloy 718 Plate surface	BA, No.3, No.4, No.6, No.1, No. 2D, No. 2B, BA NO(8), No.7, 2B, 2D, Hot rolled plate (HR), Cold rolled sheet (CR), No.1 finish hot rolled ASTM B670 Alloy 718 Plate, SATIN (Met with Plastic Coated), 2B, 1D, No.4, 8K, BA, hairline, brush, satin, mirror etc.
UNS N07718 Inconel 718 Plate Process	Hot/ Cold Rolled

 

Other Useful Information of Inconel 718 Plate for buyers

ASTM B670 Alloy 718 Plate, Sheet and Strip	ASTM B670 UNS N07718, ASME SB670 Inconel 600 Plate, Sheet and Strip - ASTM B 906/ASME SB 906, ASTM B 670/ASME SB 670, SAE/AMS 5540, ASME Code Cases 1827 and N-253, DIN 17750, EN 10095, MIL-DTL-23228, ISO 6208, BS 3072NA14 and 3073NA14
Tolerances of width and thickness	EN 10151 ASTM B670 Alloy 718 strip for springs EN 10258 (formerly DIN 59381) EN 10088 ASTM B670 Alloy 718 strip (general)
Inconel 718 Plate standards and approvals	ISO 15510 EN 10051 EN ISO 18286 EN 10088-1 ASTM A 480 EN ISO 9445 ASME IID ASTM A 959
UNS N07718 Plate Hardness	Half Hard, Soft, Spring Hard, Quarter Hard, Hard ASTM B670 Alloy 718 Sheet suppliers
Standard ASTM B670 Alloy 718 Plate & Sheet Sizes	1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm Hot rolled 718 Inconel Plate 3.0–10.0 mm Cold rolled 718 Inconel Plate 0.5-6.4 mm
Availability of ASTM B670 Alloy 718 Foil sizes	Width: Up to 500 mm (19.5 in) Thickness : 8-100 microns (0.00031-0.004 in) Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns.
Plasma profiles	As per customer's drawings
Profiling	To provide a full profiling service in India we use numerous profiling methods including: Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting
Value added services for ASTM B670 Alloy 718 Coil	Blanking Slitting Cut-to-length Polishing
Value added services for ASTM B670 Alloy 718 Plate	Waterjet cutting, Laser cutting, Bending and mechanical processing, Plasma cutting, welding, edge preparation, sawing and shearing.
Inconel 718 Plate Origin	European Origin, Indian Origin, Japanese Origin
Manufacturer & exporter of	Alloy Inconel 718 Clad plate: Alloy Inconel 718 Clad plate is a composite steel plate made by bonding UNS N07718 Inconel 718 plate, etc. 718 Inconel Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width; ASTM B670 Alloy 718 Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width; ASTM B670 Alloy 718 Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width.
Test	SGS testing, UT, TUV etc
Packing of Inconel 718 Plate	Bundles with waterproof cloth outside or plywood box
Why buy ASTM B670 Alloy 718 Plate from Metal Tube Industries?	Tested to ASTM A923 Method "C" or ASTM G48 Method "A". EN 10204 3.1 Free sample Free quote NABL Approved Lab Reports Mill Test Certificate is supplied with shipment. Minimum Nitrogen content and Ferrite Count Test Any third party inspection is accepted.

Now Stocking 718-LCF (Low Cycle Fatigue) Plates:

• Available in thickness from .031" nom. to .078" nom.
• This material is Vacuum Induction Melted - Electroslag Remelted, Type 1

 

---

Price list of Inconel 718 Plate in India	UNS N07718 Inconel 718 Plate Price in India (INR)	718 Inconel Plate Price in UK Pound sterling	Alloy Inconel 718 Plate Price in UAE Dirham
Inconel 718 Dia : 2.5 (Scbin0067) (Nickel Alloy Plate) 534 Lbs. (Ni : 53%)	INR 2,698	28.58 UK Pound sterling	138.01 UAE Dirham

This is an approximate Cost of 718 Inconel Sheet in India. For factory price buy directly from Inconel 718 Plate manufacturers in India, check latest ASTM B670 Alloy 718 Plate price list & stock sizes please mail us.

 

---

 

---

ASTM B670 Alloy 718 Plate melting range

1321-1393°C

 

---

UNS N07718 Inconel 718 Plate density

8.193 g/cm³

Specific Gravity
7.98 g/cm3

 

---

718 inconel Sheet Weight & Density

Thickness	Alloy	Plate Weight per Unit Area	Density
3/16 inches	Inconel 718	0.06000 lbs/in²42.184176 kg/m²	0.315 lbs/in³8.72 g/cm³
1/4 inches	Inconel 718	0.08 lbs/in²56.245568 kg/m²	0.315 lbs/in³8.72 g/cm³
3/8 inches	Inconel 718	0.121 lbs/in²85.0714216 kg/m²	0.315 lbs/in³8.72 g/cm³
1/2 inches	Inconel 718	0.161 lbs/in²113.1942056 kg/m²	0.315 lbs/in³8.72 g/cm³
5/8 inches	Inconel 718	0.196 lbs/in²137.8016416 kg/m²	0.315 lbs/in³8.72 g/cm³
3/4 inches	Inconel 718	0.235 lbs/in²165.221356 kg/m²	0.315 lbs/in³8.72 g/cm³
7/8 inches	Inconel 718	0.274 lbs/in²192.6410704 kg/m²	0.315 lbs/in³8.72 g/cm³
1 inches	Inconel 718	0.313 lbs/in²220.0607848 kg/m²	0.315 lbs/in³8.72 g/cm³
1 1/4 inches	Inconel 718	0.391 lbs/in²274.9002136 kg/m²	0.315 lbs/in³8.72 g/cm³
1 1/2 inches	Inconel 718	0.47 lbs/in²330.442712 kg/m²	0.315 lbs/in³8.72 g/cm³
1 3/4 inches	Inconel 718	0.549 lbs/in²385.9852104 kg/m²	0.315 lbs/in³8.72 g/cm³
2 inches	Inconel 718	0.627 lbs/in²440.8246392 kg/m²	0.315 lbs/in³8.72 g/cm³
2 1/4 inches	Inconel 718	0.705 lbs/in²495.664068 kg/m²	0.315 lbs/in³8.72 g/cm³
2 1/2 inches	Inconel 718	0.784 lbs/in²551.2065664 kg/m²	0.315 lbs/in³8.72 g/cm³
2 3/4 inches	Inconel 718	0.862 lbs/in²606.0459952 kg/m²	0.315 lbs/in³8.72 g/cm³
3 inches	Inconel 718	0.941 lbs/in²661.5884936 kg/m²	0.315 lbs/in³8.72 g/cm³

 

---

Stocked Sizes
Size (in inches)	Size (in mm)
.125"	3.18mm
.134"	3.40mm
.156"	3.96mm
.187"	4.75mm
.250"	6.35mm
.312"	7.92mm
.375"	9.53mm
.500"	12.7mm
.718"	15.9mm
.750"	19.1mm
.875"	22.2mm
1"	25.4mm
1.125"	28.6mm
1.250"	31.8mm
1.500"	38.1mm
1.750"	44.5mm
2"	50.8mm
2.500"	63.5mm
3"	76.2mm

 

---

ASTM B670 Alloy 718 Plate Imperial Dimensions

Plate Surface finish	Gauge (in)	Width (max in)
2B – Cold rolled, heat treated, pickled, skin passed Plate	10–24	72*
2D – Cold rolled, heat treated, pickled plate	12–24	60
BA Mexinox only	18–28	48
Polished plate (not brushed)	11–24	60
Temper rolled plate Mexinox only	13–29	48

ASTM B670 718 Alloy Plate Metric Dimensions

Plate Surface finish	Thickness (mm)	Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate	0.25–8.0	2032
2D – Cold rolled, heat treated, pickled plate	0.4–6.35	1524
2E – Cold rolled, heat treated, mechanically descaled plate	0.4–8.0	2032
2R – Cold rolled, bright annealed plate	0.25–3.5	1524
2H – Work hardened plate	0.4–6.35	1524
Polished, brushed plate	0.5–4.0	1524

 

---

we stock following Types of Inconel 718 Plate:

718 Inconel Plate	UNS N07718 Inconel 718 Rolling Plate
ASTM B670 Alloy 718 Chequered Plate	Alloy Inconel 718 Quarto Plate
UNS N07718 Inconel 718 Cold Rolled Plate	Alloy Inconel 718 Bbq Plate
Alloy Inconel 718 Hot Rolled Plate	ASTM B670 Alloy 718 Perforated Plate
Alloy Inconel 718 Plate Mill Finish	Inconel 718 Din 2.4668 Thin Plate
ASTM B670 Alloy 718 Plate 2b Finish	Alloy 718 Nickel Diamond Plate
Inconel 718 Din 2.4668 Chequer Plate	UNS N07718 Alloy 718 Tread Plate
Alloy 718 Nickel Clad Plate	Inconel 718 Alloy Tisco Plate
Inconel 718 Alloy Checker Plate	2.4668 Alloy 718 Polished Plate
UNS N07718 Alloy 718 Plate Mirror Finish	Inconel 718 Grade Chequered Plate
2.4668 Alloy 718 Plate Brushed Finish	Inconel 718 Superalloy Hot Rolled Sheet
Inconel 718 Grade 10mm Plate	Inconel Alloy 718 Cold Rolled Sheet
Inconel Alloy 718 Custom Cut Plate	Inconel 718 Nickel Alloy Sheet
Inconel 718 Superalloy 1/4 Inch Plate	2.4668 Inconel 718 Perforated Sheet
Inconel 718 Nickel Alloy Embossed Plate	718 Inconel Plasma Cutting Plate
2.4668 Inconel 718 Checkered Plate	ASTM B670 Alloy 718 Laser Cut Plate

 

---

Alloy	Product form	Dimension
ALLOY 718 (53 Ni/19 Cr/5 Nb)	Sheet; cold rolled, solution treated	0.5x914x3048 mm, 12.47 kg/pc
ALLOY 718 (53 Ni/19 Cr/5 Nb)	Sheet; cold rolled, solution treated	0.8x914x3048 mm, 19.05 kg/pc
ALLOY 718 (53 Ni/19 Cr/5 Nb)	Sheet; cold rolled, solution treated	1.0x1219x3000 mm, 28.7 kg/pc
ALLOY 718 (53 Ni/19 Cr/5 Nb)	Sheet; cold rolled, annealed	1.6x914x3048 mm, 37 kg/pc
INCONEL 718 (53 Ni/19 Cr/5 Nb)	Sheet; cold rolled, annealed, pickled	1.65x1220x3040 mm, 51 kg/pc
INCONEL 718 (53 Ni/19 Cr/5 Nb)	Sheet; cold rolled, pickled, annealed	2.08x914x3048 mm, 48.5 kg/pc
ALLOY 718	Sheet; cold rolled, pickled, annealed	2.54x914x3048 mm, 60.4 kg/pc
ALLOY 718 (53 Ni/19 Cr/5 Nb)	Sheet; cold rolled, pickled, sol. annealed	3.17x1219x3048 mm, 99.3 kg/pc
ALLOY 718 (53 Ni/19 Cr/5 Nb)	Sheet; cold rolled, annealed	3.71x914x3048 mm, 85.8 kg/pc
ALLOY 718 (53 Ni/19 Cr/5 Nb)	Plate; cold rolled, solution treated	12.7x1219x500 mm, 68.5 kg/pc

---

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
Inconel 718	2.4668	N07718	–	–	–	–	–

 

---

Chemical Composition of ASTM B670 Alloy 718 Plate

Ni	Cr	Fe	Mo	Nb+Ta	C	Mn	Si	Ph	S	Ti	Cu	B	Al	Co
Min	50	17	Bal	2.8	4.75	-	-	-	-	-	0.65	-	-	0.20	-
Max	55	21	-	3.3	5.50	0.08	0.035	0.35	0.015	0.015	1.15	0.30	0.006	0.80	1.00

 

ASTM B670 Alloy 718 Plate Mechanical Properties in annealed condition

0.2% Proof Stress	Tensile Strength	Elongation
	MPA	MPA	%
	Max	Max	Min
Sheet and strip	550	965	30
Plate	725	1035	30

 

Mechanical Properties in the solution treated and precipitation heat treated condition

0.2% Proof Stress	Tensile Strength	Elongation
MPA	MPA	%
Min	Min	Min
1035	1240	12

 

---

Incoloy

Incoloy refers to a range of superalloys produced by the Special Metals Corporation group of companies.

Incoloy Compositions (percentages)

 

Inconel

Inconel is a family of austenitic nickel-chromium-based superalloys.

Inconel Composition

 

---

• Resistant to aqueous corrosion and chloride ion stress corrosion cracking
• Yield tensile strength, creep, and rupture strength properties are exceedingly high
• Good mechanical properties – tensile, fatigue and creep-rupture
• Excellent welding characteristics, resistant to postweld age cracking
• Highly resistant to chloride and sulfide stress corrosion cracking
• Age-hardenable with a unique property of slow aging response that permits heating and cooling during annealing without the danger of cracking.
• High temperature resistant

 

---

• Cryogenic tanks
• Liquid fuel rocket motor components
• Springs, fasteners
• Gas turbine engine parts
• Pumps and valves
• Tooling

 

---

• Thickness greater than 6.35 mm is called a Inconel 718 Plate.
• Thickness greater than 0.15 mm and less than 6.35mm is called a Inconel 718 Sheet.
• Thickness less than 0.15mm is called a Inconel 718 Foil.

 

---

Gujarat	Tamil Nadu	Kerala	Jharkhand
Andhra Pradesh	Karnataka	Delhi	West Bengal
Noida	Uttar Pradesh	Bihar	Maharashtra

 

---

United Arab Emirates	Bahrain	Iraq	Kuwait
Oman	Qatar	Saudi Arabia(KSA)

 

Held wide Alloy 718 Nickel Shim Stock, Inconel 718 UNS N07718 Plate material wholesaler in Mumbai. stockholder of Inconel 718 Nickel Alloy 2D Plate in India, Inconel 718 Din 2.4668 Polished Plate manufacturers used for heat exchanger and gas turbine

wide range of grades and shapes of Inconel 718 Nickel Polish Plate dealer , Inconel Alloy 718 Circle stockist and traders of ASTM B670 UNS N07718 Inconel Cold Rolled Plate, JIS NCF 718 Plate.