Nickel 200 Plate

  • Home
  • Nickel 200 Plate Suppliers

Ready Stock of Nickel 200 Sheet, ASME SB162 Nickel 200 Strip, Nickel 200 Plate suppliers, Nickel Alloy 200 Coil manufacturers in India

2B/ BA/ HL/ NO.1 finish Ni 200 Foil, Stockist of Nickel 200 Alloy Hot Rolled Plate in Mumbai, India, Manufacturer of 200 Nickel Strip Tape, Nickel Werkstoff No 2.4066 Sheet, check Nickel Alloy Ni-200 Shim Sheet Price in India

Grade 200 Nickel Alloy Clad Plate is an unalloyed form of wrought nickel or otherwise known as a commercially pure wrought Nickel . One of the benefits of using Ni Alloy 200 Polished Plate is that the metal is considered to offer good mechanical properties over a broad temperature range.

Nickel 200 Plate
Nickel 200 Plate
Pure Ni Alloy 200 Sheet
Pure Ni Alloy 200 Sheet
UNS N02200 Strip
UNS N02200 Strip

 

Table Of Content

buy 2.4066 Nickel Strips For Battery Packs, Special price for ASTM B 162 Nickel 200 Plate, manufacturers of JIS NW 2200 Plate, Check Nickel N02200 Polish Plate Price List, Ni 200 Alloy Cold Rolled Plate importer of in India

Additionally, the Nickel 200 Alloy Hot Rolled Plate demonstrates excellent resistance to many corrosives, particular in those conditions where the alloy has been exposed to hydroxides.Under reducing conditions, the Nickel UNS N02200 Flat Plate tends to be most useful and has the ability to offer good resistance to corrosion in acids and alkalis. Hence, the ASME SB162 Nickel 200 Strip has been used in the manufacture and handling of sodium hydroxide, predominantly at temperature above 300C. In fact, the Nickel 200 plate has outstanding resistance to caustic alkalis up to and including its resistance to them even the molten state.

Although the Ni 200 Alloy Cold Rolled Plate material shows good resistance in acidic, alkaline and neutral salt solutions, but in oxidizing salt solutions the metal will be under severe attack. Pure Nickel Alloy 200 Sheet is resistant to all dry gases at room temperature. The material for Nickel Alloy 200 Coil also has the ability to resist dry chlorine and hydrogen chloride, therefore the 200 Nickel Strip Tape could be used in temperatures up to 550C. Resistance of the Ni 200 Foil  to mineral acids varies according to temperature, concentration and if the solution is aerated or not. nickel 200 plate suppliers in Mumbai suggest using the metal in de-aerated acid because of its ability to resist corrosion in de-aerated acids is better.


Specification of Nickel 200 Plate

Grade Nickel 200 (99.0 Ni min) - UNS N02200
Type Clad Plate, Rolling Plate, Flat Shim, Plain Sheet, Rolling Sheet Rolls, Foils, Coils, Plate, Strip, Sheet, Flats, Blank (Circle), ,Flat Sheet, Shim Sheet, soft annealed, descaled, sheared, annealed, Checker Plate, tread plate
ASTM B162 Alloy 200 Plate surface Hot rolled plate (HR), Cold rolled sheet (CR), No.1 finish hot rolled ASTM B162 Alloy 200 Plate, BA, No.3, No.4, No.6, No.1, No. 2D, No. 2B, BA NO(8), No.7, 2B, 2D, SATIN (Met with Plastic Coated), 2B, 1D, No.4, 8K, BA, hairline, brush, satin, mirror etc.
ASTM B162 Alloy 200 Plate Length 0-12mm or as required
Alloy Nickel 200 Plate Thickness 0.3 to 1200 mm or as required
200 Nickel Plate Width 0-2500mm or as required
UNS N02200 Nickel 200 Plate Process Hot/ Cold Rolled

 

Other Useful Information of Nickel 200 Plate for buyers

ASTM B162 Alloy 200 Plate, Sheet and Strip
ASTM B 162/ ASME SB 162, DIN 17750, ISO 6208
Nickel 200 Plate standards and approvals
  • ASTM A 480
  • ISO 15510
  • EN ISO 18286
  • EN 10088-1
  • EN 10051
  • ASTM A 959
  • EN ISO 9445
  • ASME IID
Tolerances of width and thickness
  • EN 10151 ASTM B162 Alloy 200 strip for springs
  • EN 10258 (formerly DIN 59381)
  • EN 10088 ASTM B162 Alloy 200 strip (general)
UNS N02200 Plate Hardness Half Hard, Soft, Spring Hard, Quarter Hard, Hard ASTM B162 Alloy 200 Sheet suppliers
Availability of ASTM B162 Alloy 200 Foil sizes
  • Width: Up to 500 mm (19.5 in)
  • Thickness : 8-100 microns (0.00031-0.004 in)
  • Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns.
Standard ASTM B162 Alloy 200 Plate & Sheet Sizes

1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm

  • Hot rolled 200 Nickel Plate 3.0–10.0 mm
  • Cold rolled 200 Nickel Plate 0.5-6.4 mm
Plasma profiles As per customer's drawings
Profiling

To provide a full profiling service in India we use numerous profiling methods including:

  • Plasma Plate Cutting
  • Oxy-propane Flame Cutting
  • Laser Plate Cutting
Value added services for ASTM B162 Alloy 200 Coil
  • Blanking
  • Slitting
  • Cut-to-length
  • Polishing
Manufacturer & exporter of
  • Alloy Nickel 200 Clad plate: Alloy Nickel 200 Clad plate is a composite steel plate made by bonding UNS N02200 Nickel 200 plate, etc.
  • 200 Nickel Sheet: material under 3/16" [5.00 mm] in thickness and 24" [601 mm] and over in width;
  • ASTM B162 Alloy 200 Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width;
  • ASTM B162 Alloy 200 Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [601 mm] in width.
Value added services for ASTM B162 Alloy 200 Plate Waterjet cutting, Laser cutting, Bending and mechanical processing, Plasma cutting, welding, edge preparation, sawing and shearing.
Nickel 200 Plate Origin European Origin, Indian Origin, Japanese Origin
Test SGS testing, UT, TUV etc
Why buy ASTM B162 Alloy 200 Plate from Metal Tube Industries?
  • Mill Test Certificate is supplied with shipment.
  • Free sample
  • EN 10204 3.1
  • Minimum Nitrogen content and Ferrite Count Test
  • Free quote
  • NABL Approved Lab Reports
  • Tested to ASTM A923 Method "C" or ASTM G48 Method "A".
  • Any third party inspection is accepted.
Packing of Nickel 200 Plate Bundles with waterproof cloth outside or plywood box

 


Alloy 200 Plate Price in India

Price list of Nickel 200 Plate in India UNS N02200 Nickel 200 Plate Price in India (INR) per unit 200 Nickel Plate Price in UK Pound sterling Alloy Nickel 200 Plate Price in UAE Dirham

Astm B162 Nickel 200 Plate / Sheet 2mm For Oil Industries

INR 127,926/pcs 1383.01 UK Pound sterling 6606.37  UAE Dirham

This is an approximate Cost of 200 Nickel Sheet in India. For factory price buy directly from Nickel 200 Plate manufacturers in India, check latest ASTM B162 Alloy 200 Plate price list & stock sizes please mail us.

 

What is Nickel 200 Plate?

The Nickel Alloy Ni-200 Shim Sheet has magnetic and magneto strictive properties and therefore is considered to be useful for both thermal and electrical conductivities by nickel 200 plate suppliers in India. Due to properties such as homogeneity,  micro cleanliness, as well as close composition control the No 2200 Nickel Battery Strip is known to enhance weldability. The significantly low levels of surface oxides not only reduces die wear but also provides excellent solderability in 2.4066 Nickel Strips For Battery Packs.

 

Types of Nickel 200 Plate

ASTM B162 Alloy 200 Precision Strip
ASTM B162 Alloy 200 Precision Strip
Alloy Nickel 200 Strip Tape
Alloy Nickel 200 Strip Tape
200 Nickel Shim Sheet
200 Nickel Shim Sheet
ASTM B162 Alloy 200 Perforated Sheet
ASTM B162 Alloy 200 Perforated Sheet
200 Nickel Plate
200 Nickel Plate
ASTM B162 Alloy 200 Sheet
ASTM B162 Alloy 200 Sheet
UNS N02200 Nickel 200 Foil
UNS N02200 Nickel 200 Foil
Alloy Nickel 200 Coil
Alloy Nickel 200 Coil
Nickel 200 Rolling Plate
Nickel 200 Rolling Plate
Alloy Nickel 200 Polished Plate
Alloy Nickel 200 Polished Plate
200 Nickel Quarto Plate
200 Nickel Quarto Plate
ASTM B162 Alloy 200 Flat Sheet
ASTM B162 Alloy 200 Flat Sheet
2.4066 Nickel 200 Hot Rolled Plate
2.4066 Nickel 200 Hot Rolled Plate
Nickel 200 Din 2.4066 Cold Rolled Sheet
Nickel 200 Din 2.4066 Cold Rolled Sheet
Nickel Alloy 200 Checker Plate
Nickel Alloy 200 Checker Plate
Nickel 200 Nickel Alloy Cold Rolled Plate
Nickel 200 Nickel Alloy Cold Rolled Plate
UNS N02200 Nickel 200 Chequered Plate
UNS N02200 Nickel 200 Chequered Plate
Alloy 200 Nickel Clad Plate
Alloy 200 Nickel Clad Plate
Alloy Nickel 200 Shim Stock
Alloy Nickel 200 Shim Stock
Nickel 200 Superalloy Mesh Plate
Nickel 200 Superalloy Mesh Plate

 

Ready Stock of Alloy Nickel 200 Plate

we stock following Types of Nickel 200 Plate:

200 Nickel Plate UNS N02200 Nickel 200 Rolling Plate
ASTM B162 Alloy 200 Chequered Plate Alloy Nickel 200 Quarto Plate
UNS N02200 Nickel 200 Cold Rolled Plate Alloy Nickel 200 Bbq Plate
Alloy Nickel 200 Hot Rolled Plate ASTM B162 Alloy 200 Perforated Plate
Nickel Alloy 200 Custom Cut Plate Nickel 200 Nickel Alloy Sheet
Nickel 200 Nickel Alloy Embossed Plate 200 Nickel Plasma Cutting Plate
Alloy Nickel 200 Plate Mill Finish Nickel 200 Din 2.4066 Thin Plate
ASTM B162 Alloy 200 Plate 2b Finish Alloy 200 Nickel Diamond Plate
Nickel 200 Alloy Checker Plate 2.4066 Alloy 200 Polished Plate
2.4066 Nickel 200 Checkered Plate ASTM B162 Alloy 200 Laser Cut Plate
Nickel 200 Superalloy 1/4 Inch Plate 2.4066 Nickel 200 Perforated Sheet
Nickel 200 Grade 10mm Plate Nickel Alloy 200 Cold Rolled Sheet
2.4066 Alloy 200 Plate Brushed Finish Nickel 200 Superalloy Hot Rolled Sheet
UNS N02200 Alloy 200 Plate Mirror Finish Nickel 200 Grade Chequered Plate
Nickel 200 Din 2.4066 Chequer Plate UNS N02200 Alloy 200 Tread Plate
Alloy 200 Nickel Clad Plate Nickel 200 Alloy Tisco Plate

 

UNS N02200 Nickel 200 Plate density

UNS N02200 Nickel 200 Plate density
lb/in 3 : 0.321
g/cm 3: 8.89

 

ASTM B162 Alloy 200 Plate melting range

ASTM B162 Alloy 200 Plate melting range
°F: 2615-2635
°C: 1435-1446

 

Size chart of 200 Nickel Plate

Stocked Sizes
Size (in inches)
Size (in mm)
.125"
3.18mm
.134"
3.40mm
.156"
3.96mm
.187"
4.75mm
.250"
6.35mm
.312"
7.92mm
.375"
9.53mm
.500"
12.7mm
.601"
15.9mm
.750"
19.1mm
.875"
22.2mm
1"
25.4mm
1.125"
28.6mm
1.250"
31.8mm
1.500"
38.1mm
1.750"
44.5mm
2"
50.8mm
2.500"
63.5mm
3"
76.2mm

Dimensions: widths 1000/1220/1500 mm, lengths 2000/2500/3000 mm.

 

Weight per Unit of Alloy 200 Nickel Plate

200 Nickel Sheet Weight & Density

Thickness Alloy Plate Weight per Unit Area Density
3/16 inches Nickel 200 0.06000 lbs/in²42.184176 kg/m² 0.315 lbs/in³8.72 g/cm³
1/4 inches Nickel 200 0.08 lbs/in²56.245568 kg/m² 0.315 lbs/in³8.72 g/cm³
3/8 inches Nickel 200 0.121 lbs/in²85.0714216 kg/m² 0.315 lbs/in³8.72 g/cm³
1/2 inches Nickel 200 0.161 lbs/in²113.1942056 kg/m² 0.315 lbs/in³8.72 g/cm³
5/8 inches Nickel 200 0.196 lbs/in²137.8016416 kg/m² 0.315 lbs/in³8.72 g/cm³
3/4 inches Nickel 200 0.235 lbs/in²165.221356 kg/m² 0.315 lbs/in³8.72 g/cm³
7/8 inches Nickel 200 0.274 lbs/in²192.6410704 kg/m² 0.315 lbs/in³8.72 g/cm³
1 inches Nickel 200 0.313 lbs/in²220.0607848 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/4 inches Nickel 200 0.391 lbs/in²274.9002136 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/2 inches Nickel 200 0.47 lbs/in²330.442712 kg/m² 0.315 lbs/in³8.72 g/cm³
1 3/4 inches Nickel 200 0.549 lbs/in²385.9852104 kg/m² 0.315 lbs/in³8.72 g/cm³
2 inches Nickel 200 0.627 lbs/in²440.8246392 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/4 inches Nickel 200 0.705 lbs/in²495.664068 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/2 inches Nickel 200 0.784 lbs/in²551.2065664 kg/m² 0.315 lbs/in³8.72 g/cm³
2 3/4 inches Nickel 200 0.862 lbs/in²606.0459952 kg/m² 0.315 lbs/in³8.72 g/cm³
3 inches Nickel 200 0.941 lbs/in²661.5884936 kg/m² 0.315 lbs/in³8.72 g/cm³

 

Dimensions of Nickel 200 Plate

ASTM B162 Alloy 200 Plate Imperial Dimensions

Plate Surface finish Gauge (in) Width (max in)
2B – Cold rolled, heat treated, pickled, skin passed Plate 10–24 72*
2D – Cold rolled, heat treated, pickled plate 12–24 60
BA Mexinox only 18–28 48
Polished plate (not brushed) 11–24 60
Temper rolled plate Mexinox only 13–29 48

ASTM B162 200 Alloy Plate Metric Dimensions

Plate Surface finish Thickness (mm) Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate 0.25–8.0 2032
2D – Cold rolled, heat treated, pickled plate 0.4–6.35 1524
2E – Cold rolled, heat treated, mechanically descaled plate 0.4–8.0 2032
2R – Cold rolled, bright annealed plate 0.25–3.5 1524
2H – Work hardened plate 0.4–6.35 1524
Polished, brushed plate 0.5–4.0 1524

 

Difference between Nickel 200 Plate, Sheet, & Foil

  • Thickness greater than 0.15 mm and less than 6.35mm is called a Nickel 200 Sheet.
  • Thickness greater than 6.35 mm is called a Nickel 200 Plate.
  • Thickness less than 0.15mm is called a Nickel 200 Foil.

 

AMS 5553 Nickel 200 Sheet Stock List

Alloy Product form Dimension
NICKEL 200 (99.0 Ni min) Strip; cold rolled, annealed 0.10x56.5 mm x coil, 0.05 kg/m
NICKEL 200 (99.0 Ni min) Strip; cold rolled, annealed 0.15x3 mm x coil, 0.004 kg/m
NICKEL 200 (99.0 Ni min) Strip; cold rolled annealed 0.15x5 mm x coil, 0.007 kg/m
NICKEL 200 (99.0 Ni min) Strip; cold rolled, annealed 0.15x7 mm x coil, 0.009 kg/m
NICKEL 200 /201 (99.0 Ni min) Strip; annealed 0.15x150 mm x coil, 0.20 kg/m
NICKEL 200/201 (99.0 Ni min) Sheet; cold rolled, soft annealed, descaled, sheared 3.0x1200x3000 mm, 95.9 kg/pc


UNS N02200 Nickel 200 Plate Properties

Chemical Composition of ASTM B162 Alloy 200 Plate

Grade C Mn Si S Cu Fe Ni
Nickel 200 0.15 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min

 

ASTM B162 Alloy 200 Plate Mechanical Properties

Product Form Condition Tensile (ksi) .2% Yield (ksi) Elongation (%) Hardness (HRB)
Plate Hot-Rolled / Annealed 55-80 15-40 60-40 45-75
Sheet Annealed 55-75 15-30 55-40 70 max

 

Equivalent Grades of Nickel 200 Plate

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 200 2.4066 N02200 NW 2200 NA 11 НП-2 N-100M Ni 99.2

 

Difference Between Nickel and Inconel

Nickel

Nickel could be a chemical component with symbol Ni and nuclear number 28. It could be a silvery-white brilliant metal with a slight golden tinge. Nickel has a place to the move metals and is difficult and bendable

Nickel Composition

Nickel 200 Ni C Mo Mn Si Fe P S Cu Cr
99.0 min 0.15 max 0.35 max 0.1 max 0.4 max 0.01 max 0.25 max
Nickel 201 Ni C Mo Mn Si Fe P S Cu Cr
Balance 0.15 max 0.35 max 0.35 max 0.40 max 0.01 max 0.25 max


Inconel

Inconel is a family of austenitic nickel-chromium-based superalloys.

Inconel Composition

Inconel Element (% by mass)
Ni Cr Fe Mo Nb Co Mn Cu Al Ti Si C S P B
601 72.0 14.0–17.0 6.0–10.0 1.0 0.5 0.5 0.15 0.015
617 44.2–56.0 20.0–24.0 3.0 8.0–10.0 10.0–15.0 0.5 0.5 0.8–1.5 0.6 0.5 0.15 0.015 0.015 0.006
601 58.0 20.0–23.0 5.0 8.0–10.0 3.15–4.15 1.0 0.5 0.4 0.4 0.5 0.1 0.015 0.015
690 59.5 30 9.2 0.35 0.01 0.02 0.35 0.019 0.003
718 50.0–55.0 17.0–21.0 balance 2.8–3.3 4.75–5.5 1.0 0.35 0.2–0.8 0.65–1.15 0.3 0.35 0.08 0.015 0.015 0.006
X-750 70.0 14.0–17.0 5.0–9.0 0.7–1.2 1.0 1.0 0.5 0.4–1.0 2.25–2.75 0.5 0.08 0.01

 

Nickel 200 plate uses

  • Manufacture and handling of sodium hydroxide, particularly at temperatures above 300° F
  • Marine and offshore engineering
  • Reactors and vessels in which fluorine is generated and reacted with hydrocarbons
  • Food processing equipment
  • Salt production
  • Caustic handling equipment

 

Alloy 200 Plate Features

  • Excellent resistance to dry fluorine
  • Excellent corrosion resistance to distilled and natural waters
  • Widely used to handle caustic soda
  • Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations
  • Highly resistant to various reducing chemicals
  • High electrical conductivity
  • Resistance to neutral and alkaline salt solutions
  • Excellent resistance to caustic alkalies
  • Good thermal, electrical and magnetostrictive properties

 

Express delivery of Nickel 200 plate in following States

West Bengal
Gujarat
Bihar
Kerala
Noida
 Tamil Nadu
Maharashtra
Karnataka
Andhra Pradesh
Uttar Pradesh
Delhi
Jharkhand

 

get delivery schedule and best price of Nickel 200 Sheet in following countries

Bahrain
Oman
United Arab Emirates
Kuwait
Iraq
Saudi Arabia(KSA)
Qatar

 

Cut to size Alloy 200 Nickel Strip For Battery Welding, manufacturers of Ni Alloy 200 Polished Plate, stockholder of 200 Nickel Alloy Clad Plate in India, wholesaler of Alloy 200 Nickel Foil in Mumbai used in aerospace products
Hot sale of UNS N02200 Nickel 200 Strip, suppliers of No 2200 Nickel Battery Strip, stockist of Nickel 2200 2D Plate, dealer of 200 Nickel Strip Tape traders of Nickel UNS N02200 Flat Plate