Nickel 201 Plate

Special price for Pure Nickel 201 Sheet, suppliers of n02201 nickel Strip 2.4068 Nickel 201 Foil manufacturers in India

Hot sale of Nickel Alloy 201 Plate, Stockist of Ni 201 Strip Tape, Nickel Alloy Ni-201 Shim in Mumbai, India, Manufacturer of Pure 201 Nickel Hot Rolled Plate, check UNS N02201 Nickel 201 Coil Price in India.

The lower carbon content present in Nickel N02201 Polish Plate  aids in the prevention of embrittlement, which could be caused by inter-granular carbon on exposure to elevated temperatures.Ni 201 Alloy Cold Rolled Plate has good resistance to corrosion to both acids as well as alkalis and is found to be most useful under reducing conditions.

Table Of Content

Ready Stock of Nickel 201 Alloy Shim Sheet, Nickel 2201 2D Plate, manufacturers of Ni 201 Alloy Cold Rolled Plate, Check JIS NW 2201 Plate Stock, importer of ASME SB 162 Alloy 201 Nickel Polished Plate in India

This property also finds use in applications where the Nickel 201 Alloy Shim Sheet is to be used in the manufacture and handling of sodium hydroxide which is a highly caustic base. Not only this, nickel 201 sheet suppliers in india also observe that this metal is particularly resistant to sodium hydroxide even at a temperature above 300C.The material used to produce Pure 201 Nickel Hot Rolled Plate shows good resistance, in salt solutions which are not only acidic or alkaline in nature but also in those salt solutions which are neutral. Therefore the 201 Nickel Clad Plate could be used in the soap industry for the manufacture of soap.

Although manufacturers note that in oxidising salt solutions, the UNS N02201 Nickel 201 Coil will undergo severe corrosive attack . Since the 2.4068 Nickel 201 Foil is resistant to all dry gases at room temperature, the metal can be used in dry chlorine and hydrogen chloride environments, at temperatures up to 550C. Hence, the No 2201 Nickel 201 Strip can be used in the production of Analine hydrochloride. Further, the Pure Nickel 201 Sheet can also be used in the chlorination of aliphatic hydrocarbons such as methane, benzene, or ethane.  Although exposing the Nickel Alloy 201 Plate to chlorates must be kept to a minimum.

 

---

Grade	Nickel 201 (99.0 Ni min) - UNS N02201
Type	Clad Plate, Rolling Plate, Flat Shim, Plain Sheet, Rolling Sheet Rolls, Foils, Coils, Plate, Strip, Sheet, Flats, Blank (Circle), ,Flat Sheet, Shim Sheet, soft annealed, descaled, sheared, annealed, Checker Plate, tread plate
ASTM B162 Alloy 201 Plate surface	Hot rolled plate (HR), Cold rolled sheet (CR), No.1 finish hot rolled ASTM B162 Alloy 201 Plate, BA, No.3, No.4, No.6, No.1, No. 2D, No. 2B, BA NO(8), No.7, 2B, 2D, SATIN (Met with Plastic Coated), 2B, 1D, No.4, 8K, BA, hairline, brush, satin, mirror etc.
ASTM B162 Alloy 201 Plate Length	0-12mm or as required
Alloy Nickel 201 Plate Thickness	0.3 to 1200 mm or as required
201 Nickel Plate Width	0-2500mm or as required
UNS N02201 Nickel 201 Plate Process	Hot/ Cold Rolled

 

Other Useful Information of Nickel 201 Plate for buyers

ASTM B162 Alloy 201 Plate, Sheet and Strip	ASTM B 162/ ASME SB 162, DIN 17750, ISO 6208
Nickel 201 Plate standards and approvals	ASTM A 480 ISO 15510 EN ISO 18286 EN 10088-1 EN 10051 ASTM A 959 EN ISO 9445 ASME IID
Tolerances of width and thickness	EN 10151 ASTM B162 Alloy 201 strip for springs EN 10258 (formerly DIN 59381) EN 10088 ASTM B162 Alloy 201 strip (general)
UNS N02201 Plate Hardness	Half Hard, Soft, Spring Hard, Quarter Hard, Hard ASTM B162 Alloy 201 Sheet suppliers
Availability of ASTM B162 Alloy 201 Foil sizes	Width: Up to 500 mm (19.5 in) Thickness : 8-100 microns (0.00031-0.004 in) Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns.
Standard ASTM B162 Alloy 201 Plate & Sheet Sizes	1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm Hot rolled 201 Nickel Plate 3.0–10.0 mm Cold rolled 201 Nickel Plate 0.5-6.4 mm
Plasma profiles	As per customer's drawings
Profiling	To provide a full profiling service in India we use numerous profiling methods including: Plasma Plate Cutting Oxy-propane Flame Cutting Laser Plate Cutting
Value added services for ASTM B162 Alloy 201 Coil	Blanking Slitting Cut-to-length Polishing
Manufacturer & exporter of	Alloy Nickel 201 Clad plate: Alloy Nickel 201 Clad plate is a composite steel plate made by bonding UNS N02201 Nickel 201 plate, etc. 201 Nickel Sheet: material under 3/16" [5.00 mm] in thickness and 24" [601 mm] and over in width; ASTM B162 Alloy 201 Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width; ASTM B162 Alloy 201 Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [601 mm] in width.
Value added services for ASTM B162 Alloy 201 Plate	Waterjet cutting, Laser cutting, Bending and mechanical processing, Plasma cutting, welding, edge preparation, sawing and shearing.
Nickel 201 Plate Origin	European Origin, Indian Origin, Japanese Origin
Test	SGS testing, UT, TUV etc
Why buy ASTM B162 Alloy 201 Plate from Metal Tube Industries?	Mill Test Certificate is supplied with shipment. Free sample EN 10204 3.1 Minimum Nitrogen content and Ferrite Count Test Free quote NABL Approved Lab Reports Tested to ASTM A923 Method "C" or ASTM G48 Method "A". Any third party inspection is accepted.
Packing of Nickel 201 Plate	Bundles with waterproof cloth outside or plywood box

 

---

Price list of Nickel 201 Plate in India	UNS N02201 Nickel 201 Plate Price in India (INR) per unit	201 Nickel Plate Price in UK Pound sterling	Alloy Nickel 201 Plate Price in UAE Dirham
Astm B162 Nickel 201 Plate 2mm For Chemical Plant	INR 128,926/pcs	1389 UK Pound sterling	6610 UAE Dirham
Nickel 201 Strip	INR 2,289/kg	25 UK Pound sterling	116 UAE Dirham

This is an approximate Cost of 201 Nickel Sheet in India. For factory price buy directly from Nickel 201 Plate manufacturers in India, check latest ASTM B162 Alloy 201 Plate price list & stock sizes please mail us.

 

---

Just like Nickel grade 200,  Nickel 201 plate is also known as commercially pure wrought Nickel. Although N02201 Alloy 4mm Thick Plate has properties which make it similar to Alloy 200, but the difference between both these metal grades is with a lower carbon content used in the alloying of the Nickel 201 UNS N02201 Flat Plate. Similar to nickel grade 200, Nickel Alloy Ni-201 Shim Stock demonstrates outstanding resistance to caustic alkalis up to and includes the molten state as well, which makes it useful if used in the production of viscose rayon.

 

---

 

---

we stock following Types of Nickel 201 Plate:

201 Nickel Plate	UNS N02201 Nickel 201 Rolling Plate
ASTM B162 Alloy 201 Chequered Plate	Alloy Nickel 201 Quarto Plate
UNS N02201 Nickel 201 Cold Rolled Plate	Alloy Nickel 201 Bbq Plate
Alloy Nickel 201 Hot Rolled Plate	ASTM B162 Alloy 201 Perforated Plate
Nickel Alloy 201 Custom Cut Plate	Nickel 201 Nickel Alloy Sheet
Nickel 201 Nickel Alloy Embossed Plate	201 Nickel Plasma Cutting Plate
Alloy Nickel 201 Plate Mill Finish	Nickel 201 Din 2.4068 Thin Plate
ASTM B162 Alloy 201 Plate 2b Finish	Alloy 201 Nickel Diamond Plate
Nickel 201 Alloy Checker Plate	2.4068 Alloy 201 Polished Plate
2.4068 Nickel 201 Checkered Plate	ASTM B162 Alloy 201 Laser Cut Plate
Nickel 201 Superalloy 1/4 Inch Plate	2.4068 Nickel 201 Perforated Sheet
Nickel 201 Grade 10mm Plate	Nickel Alloy 201 Cold Rolled Sheet
2.4068 Alloy 201 Plate Brushed Finish	Nickel 201 Superalloy Hot Rolled Sheet
UNS N02201 Alloy 201 Plate Mirror Finish	Nickel 201 Grade Chequered Plate
Nickel 201 Din 2.4068 Chequer Plate	UNS N02201 Alloy 201 Tread Plate
Alloy 201 Nickel Clad Plate	Nickel 201 Alloy Tisco Plate

 

---

UNS N02201 Nickel 201 Plate density

lb/in 3 : 0.321 g/cm 3: 8.89

 

---

ASTM B162 Alloy 201 Plate melting range

°F: 2615-2635 °C: 1435-1446

 

---

Stocked Sizes
Size (in inches)	Size (in mm)
.125"	3.18mm
.134"	3.40mm
.156"	3.96mm
.187"	4.75mm
.250"	6.35mm
.312"	7.92mm
.375"	9.53mm
.500"	12.7mm
.601"	15.9mm
.750"	19.1mm
.875"	22.2mm
1"	25.4mm
1.125"	28.6mm
1.250"	31.8mm
1.500"	38.1mm
1.750"	44.5mm
2"	50.8mm
2.500"	63.5mm
3"	76.2mm

Dimensions: widths 1000/1220/1500 mm, lengths 2000/2500/3000 mm.

 

---

201 Nickel Sheet Weight & Density

Thickness	Plate Weight per Unit Area	Density
3/16 inches	0.06000 lbs/in²42.184176 kg/m²	0.315 lbs/in³8.72 g/cm³
1/4 inches	0.08 lbs/in²56.245568 kg/m²	0.315 lbs/in³8.72 g/cm³
3/8 inches	0.121 lbs/in²85.0714216 kg/m²	0.315 lbs/in³8.72 g/cm³
1/2 inches	0.161 lbs/in²113.1942056 kg/m²	0.315 lbs/in³8.72 g/cm³
5/8 inches	0.196 lbs/in²137.8016416 kg/m²	0.315 lbs/in³8.72 g/cm³
3/4 inches	0.235 lbs/in²165.221356 kg/m²	0.315 lbs/in³8.72 g/cm³
7/8 inches	0.274 lbs/in²192.6410704 kg/m²	0.315 lbs/in³8.72 g/cm³
1 inches	0.313 lbs/in²220.0607848 kg/m²	0.315 lbs/in³8.72 g/cm³
1 1/4 inches	0.391 lbs/in²274.9002136 kg/m²	0.315 lbs/in³8.72 g/cm³
1 1/2 inches	0.47 lbs/in²330.442712 kg/m²	0.315 lbs/in³8.72 g/cm³
1 3/4 inches	0.549 lbs/in²385.9852104 kg/m²	0.315 lbs/in³8.72 g/cm³
2 inches	0.627 lbs/in²440.8246392 kg/m²	0.315 lbs/in³8.72 g/cm³
2 1/4 inches	0.705 lbs/in²495.664068 kg/m²	0.315 lbs/in³8.72 g/cm³
2 1/2 inches	0.784 lbs/in²551.2065664 kg/m²	0.315 lbs/in³8.72 g/cm³
2 3/4 inches	0.862 lbs/in²606.0459952 kg/m²	0.315 lbs/in³8.72 g/cm³
3 inches	0.941 lbs/in²661.5884936 kg/m²	0.315 lbs/in³8.72 g/cm³

 

---

ASTM B162 Alloy 201 Plate Imperial Dimensions

Plate Surface finish	Gauge (in)	Width (max in)
2B – Cold rolled, heat treated, pickled, skin passed Plate	10–24	72*
2D – Cold rolled, heat treated, pickled plate	12–24	60
BA Mexinox only	18–28	48
Polished plate (not brushed)	11–24	60
Temper rolled plate Mexinox only	13–29	48

ASTM B162 201 Alloy Plate Metric Dimensions

Plate Surface finish	Thickness (mm)	Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate	0.25–8.0	2032
2D – Cold rolled, heat treated, pickled plate	0.4–6.35	1524
2E – Cold rolled, heat treated, mechanically descaled plate	0.4–8.0	2032
2R – Cold rolled, bright annealed plate	0.25–3.5	1524
2H – Work hardened plate	0.4–6.35	1524
Polished, brushed plate	0.5–4.0	1524

 

---

• Thickness greater than 0.15 mm and less than 6.35mm is called a Nickel 201 Sheet.
• Thickness greater than 6.35 mm is called a Nickel 201 Plate.
• Thickness less than 0.15mm is called a Nickel 201 Foil.

 

---

Alloy	Product form	Dimension
NICKEL 201 (99.0 Ni min)	Strip; annealed	0.10x150 mm x coil, 0.13 kg/m
NICKEL 201 (99.0 Ni min)	Strip; annealed	0.125x139 mm x coil, 0.154 kg/m
NICKEL 201 (99.4 Ni min)	Strip; annealed	0.15x200 mm x coil, 0.27 kg/m
NICKEL 201 (99.0 Ni min)	Strip; cold rolled, annealed	0.20x99.5 mm x coil, 0.177 kg/m
NICKEL 201 (99.0 Ni min)	Strip; annealed	0.20x200 mm x coil, 0.36 kg/m
NICKEL 201 (99.0 Ni min)	Strip; cold rolled, annealed	0.30x200 mm x coil, 0.54 kg/m
NICKEL 201 (99.0 Ni min)	Sheet; cold rolled, annealed	0.5x1000x2000 mm, 9.0 kg/pc
NICKEL 201 (99.0 Ni min)	Sheet; cold rolled, annealed	0.6x1000x2500 mm, 14.7 kg/pc
NICKEL 201 (99.0 Ni min)	Sheet; cold rolled, annealed	0.7x1000x2500 mm, 17.0 kg/pc
NICKEL 201 (99.0 Ni min)	Sheet; cold rolled, annealed	0.8x1000x2000 mm, 13.9 kg/pc
NICKEL 201 (99.0 Ni min)	Sheet; cold rolled, annealed	1.0x1000x2000 mm, 18.0 kg/pc
NICKEL 201 (99.0 Ni min)	Sheet; cold rolled, annealed	1.5x1000x2000 mm, 27.8 kg/pc
NICKEL 201 (99.0 Ni min)	Sheet; cold rolled, annealed	2.0x1000x2000 mm, 36.3 kg/pc
NICKEL 201 (99.0 Ni min)	Sheet; cold rolled, soft annealed, descaled, sheared	4.0x1200x3000 mm, 130 kg/pc
NICKEL 201 (99.0 Ni min)	Plate; hot rolled, soft annealed, descaled, sheared	5.0x2000x4000 mm, 356 kg/pc
NICKEL 201 (99.0 Ni min)	Plate; hot rolled, descaled, annealed	6.0x2000x4000 mm, 463 kg/pc
NICKEL 201 (99.0 Ni min)	Plate; hot rolled, soft annealed, descaled	10.0x2000x3000 mm, 554 kg/pc
NICKEL 201 (99.0 Ni min)	Blech; warmgewalzt, weichgegl¼ht, entzundert	10.0x1500x2000 mm
NICKEL 201 (99.0 Ni min)	Plate; hot rolled, soft annealed, descaled	10.0x2000x6000 mm
NICKEL 201 (99.0 Ni min)	Plate; hot rolled, soft annealed, descaled	10.0x935x6000 mm

---

Chemical Composition of ASTM B162 Alloy 201 Plate

Nickel 201	Ni	C	Mo	Mn	Si	Fe	P	S	Cu	Cr
	Balance	0.15 max	–	0.35 max	0.35 max	0.40 max	–	0.01 max	0.25 max	–

 

ASTM B162 Alloy 201 Plate Mechanical Properties

Density	Melting Point	Yield Strength (0.2%Offset)	Tensile Strength	Elongation
8.9 g/cm3	1446 °C (2635 °F)	Psi – 21500 , MPa – 148	Psi – 67000 , MPa – 462	45 %

 

---

STANDARD	UNS	WERKSTOFF NR.	AFNOR	EN	JIS	BS	GOST
Nickel 201	N02201	2.4068	–	LC-Ni 99	NW 2201	NA 12	НП-2

 

---

Nickel

Nickel could be a chemical component with symbol Ni and nuclear number 28. It could be a silvery-white brilliant metal with a slight golden tinge. Nickel has a place to the move metals and is difficult and bendable

Nickel Composition

Inconel

Inconel is a family of austenitic nickel-chromium-based superalloys.

Inconel Composition

 

---

• Manufacture and handling of sodium hydroxide, particularly at temperatures above 300° F
• Marine and offshore engineering
• Reactors and vessels in which fluorine is generated and reacted with hydrocarbons
• Food processing equipment
• Salt production
• Caustic handling equipment

 

---

• Excellent resistance to dry fluorine
• Excellent corrosion resistance to distilled and natural waters
• Widely used to handle caustic soda
• Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations
• Highly resistant to various reducing chemicals
• High electrical conductivity
• Resistance to neutral and alkaline salt solutions
• Excellent resistance to caustic alkalies
• Good thermal, electrical and magnetostrictive properties

 

---

West Bengal	Gujarat	Bihar	Kerala
Noida	Tamil Nadu	Maharashtra	Karnataka
Andhra Pradesh	Uttar Pradesh	Delhi	Jharkhand

 

---

Bahrain	Oman	United Arab Emirates	Kuwait
Iraq	Saudi Arabia(KSA)	Qatar

 

2B/ BA/ HL/ NO.1 finish Ni Alloy 201 Polished Cold Drawn Plate, manufacturers of 201 Nickel Alloy Slitting Coil, ASTM B 162 Nickel 201 Steel Plates, stockholder of 201 Nickel Clad Plate in India, wholesaler of N02201 Alloy 4mm Thick Plate in Mumbai

Cut to size Nickel 201 UNS N02201 Flat Plate from suppliers, stockist of Nickel N02201 Polish Plate, dealer of Nickel Alloy UNS No 2201 Plate material traders of Nickel Grade 201 Full size sheet