Titanium Round Bar

  • Home
  • Pure Titanium Round Bar

Cut to size Titanium rod Stock, ASTM B348 Ti Alloy Hex Bar manufacturers in India, suppliers of Titanium Bar, Pure Titanium Round Bar

buy ASTM B348 Titanium Flat Bar, Manufacturer of titanium Hollow Bar, check Titanium Bright Bar Price in India, get ASTM B348 Titanium Bar Stock in Mumbai, India

Standard ASTM B348 is a specification which covers annealed Pure Titanium Round Bar and grills. All material grades, in this case the ASTM B348 Titanium Flat Bar covered here must conform to the specified chemical composition requirements.

Pure Titanium Round Bar
Pure Titanium Round Bar
Titanium Alloy Rod
Titanium Alloy Rod
 Titanium Hex Bar
Titanium Hex Bar

 

Table Of Content

Bright finish manufacturers of ASTM B348 Titanium Cold Drawn Bar, Special price for Titanium Alloy Square Bar, importer of titanium Polished Bar in India, Check Titanium ASTM B348 Forged Bar Price Per Kg


Each annealed Titanium ASTM B348 Forged Bar material has to be furnished. The furnishing depends on the client, whether he requires the ASTM B348 Titanium Bar Stock in either of the following conditions i.e. -  descaled, sandblasted, ground, or rough turned.

There are various advantageous physical properties of using Titanium Alloy Spring Steel Bar, these advantages are as follows.

  1. Titanium Alloy Round Rod is light in weight, which would put the specific gravity of this metal at about 1.7 times that of aluminium. and about 60% of specific gravity of steel.
  2. Titanium Bright Bar has a low thermal expansion, which puts it at 1/3rd that of aluminium.
  3. The heat conductivity of Titanium Alloy Square Bar is low, and is nearly the same as grade 18-8 stainless steel. Similarly, the electric conductivity of the alloy is low and the electric conductivity of titanium Cold Finished Bar about 3% of copper.
  4. Titanium Alloy Hexagon Bars tend to be non-magnetic in nature.
  5. Titanium Polished Bar has high flexibility i.e. its Longitudinal elastic modulus. Which means that the flexibility of ASTM B348 Ti Alloy Hex Bar is one half of iron or stainless steel and it is the same as copper.

We are one of the leading distributors, manufactures and titanium round bar suppliers in Mumbai.

 

Titanium Alloy Round Bar Price in India

Price list of Titanium round bar in India Titanium Alloy Bar Price in India (INR) Titanium Rod Price in UK Pound sterling Titanium Alloy Round Bar Price in UAE Dirham

Titanium Plain Round Bar 10mmx 300mm 50mm Both/Sid/Trd

INR 607 6.56 UK Pound sterling 31.37 UAE Dirham

This is an approximate Cost of Titanium Round Bar Stock in India. For factory price buy directly from hot or cold finished Titanium round bar manufacturers in India, check latest Titanium Alloy Round Bar price list & stock sizes please mail us.

 

Titanium round bar Specification

Titanium bar:

  • Grade:  Gr5, Ti-6AL4V Ti-6AL4VELI, Gr7, Gr9, Gr12
  • Specification: OD 6mm -30mm XL <6000mm OD30mm-300mm X L <4000mm
  • M/Engineering: forged and hot rolled.
  • Surface treatment: polished/ peeled/ pickled/ turned
  • Shape: round /square
  • Standard:  ASTM B348, ASME SB 348, ASTM F136, AMS 4928, ISO 5832-2

 

Common Trade Names Titanium, pure titanium
Specification ASTM B348
Standard ASTM B348, ASTM F136, ASTM F67, ASTM F136, ISO-5832-2(3), AMS4928, MIL-T-9047G, JIS etc
Titanium Grade Round Bar Sizes
  • Minimum diameter: 0.040 inch or 1.00 mm
  • Maximum diameter: 14.000 inch or 400.00 mm
Type Ti square bar, Ti round bar, Ti hexagonal bar, Ti flat bar, Titanium Alloy Bars, Ti Billets, Forgings, and Forging Stock
Condition R/M /Y
ASTM B348 Ti Alloy Hex Bar size 2-100mm A/F
Titanium Alloy Flat bar size Thickness: 2 -100mm
Width: 10 to 500mm
Pure Titanium Square bar size 4 to 100mm
AMS Specificaton of Titanium Round Bar ASTM B348 (Grade 5), ASTM B348 (Grade 2), ASTM B348 (Grade 4), ASTM B348 (Grade 23), ASTM F67 (Grade 2), ASTM F67 (Grade 4), ASTM F136, ASTM F1472, MIL-T-9047 (6AL-4V), MIL-T-9047 (6AL-4V ELI), MIL-T-9047 (6AL-6V-2SN), MIL-T-9047 (CP-70 GR.4), AMS 6935, AMS 6936, AMS-T-9047 (6AL-4V), AMS-T-9047 (6AL-4V ELI), AMS-T-9047 (6AL-6V-2SN), AMS-T-9047 (CP-70 GR.4), DMS 1570, DMS 1583, AMS 4971, AMS 4921, AMS 4928, AMS 4930, AMS 4965, AMS 4967, AMS 4978, AMS 4979, AMS 6930, AMS 6931 and More.
Titanium Angle bar size (in mm) 3*20*20~12*100*100
ASTM B348 Titanium Section 3.0 to 12.0mm thickness
Titanium ASTM B348 Channel Bar (in mm) 80 x 40 to 150 x 75 section; 5.0 to 6.0 thickness
Pure Titanium Hollow Bar (in mm) 32 OD x 16 ID to 250 OD x 200 ID)
Titanium Alloy Billet Size 1/2" to 495mm Diameter
ASTM B348 Ti Alloy Rectangles Size 33 x 30mm to 295 x 1066mm
ASTM B348 Ti Alloy Round Bar Finish Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
ASTM B348 Ti Round Bar Surface Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline
Titanium Round Bar Uses chemical industry, Industrial, medical industry, military industry etc
Titanium round bar Condition Hardened & tempered, annealed
ASTM B348 Ti Alloy Bar Technique Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod
Titanium Alloy Round Bar Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Alloy Titanium Bar Processing Bar cutting to 650mm
Our Titanium round bar stockyad in India Pune, Tiruchirappalli, Ahmedabad, Thiruvananthapuram, Hyderabad, Chennai, Gujarat, Coimbatore, Mumbai, Shivamogga, Bhubaneswar, Dhanbad, Noida, Bengaluru, Tirunelveli, Agra, Navi Mumbai, Pimpri-Chinchwad,
Our Titanium Alloy Round bar conforms to NACE MR0175/ISO 15156

 

Standard Specification : ASTM B348 / ASME SB348

UNS grade Products
Grade 1 - UNS R50250
Grade 2 - UNS R50400
Grade 5 - UNS R56400
Grade 7 - UNS R52400
Grade 9 - UNS R56320
Grade 12 - UNS R53400
Titanium Round Bar
Titanium Rod
Titanium Hex Bar
Titanium Flat Bar
Titanium Rods
Titanium Square Bar


Titanium Round Bar Order & Packing Information
  Min. Order: 10 Pieces (or please enquire for your customized order)
Trade Terms: FOB, CIF
Payment Terms: L/C, T/T
Packing: as per requirement
Place of Origin: Mumbai, India
Means of Transport: Land, Ocean
Delivery Date: one or two week
Package:
 in wooden crate with plastic caps on each end.
Titanium Alloy Round Bar Grades

Commercially Pure Titanium and Titanium Alloys:

6Al-4V | 6Al-4V ELI | 6Al-2SN-4ZR-6MO | 6Al-6V-2SN | 7Al-4Mo

Grade 1 | Grade 2 | Grade 4 | Grade 5

 

Titanium round bar Stock range

  • Standard sizes range from 8 mm (5/16 in) to 200 mm (8 in) diameter
  • Many non-standards are available in both metric and imperial diameters and sizes

Titanium round bar Cut to size

  • All Titanium Bars can be cut to size to tolerances of ± 1.0 mm (0.040 in)

Commercially pure and alloyed grades are also available. Stock of Grade Solid Titanium Round Bar, for Strength Lightweight Corrosion and Heat Resistance

Types of Aircraft Grade Titanium Bar

Titanium Bar Delivery condition

  • Peeled, center less ground & polished
  • The strain Hardened
  • Cold drawn Titanium Bar
  • Trailed center less ground & polished
  • Turned & rough polished Titanium Bar
  • Hardened strain Titanium Hex Bar
  • Smooth Turned & Polished Titanium Rod
  • Peeled and polished Titanium Rod
  • Annealed Titanium Hex Bar
  • Solenoid quality

 

What is Titanium round bar?

Elements which have been intentionally added to the melt  by the ASTM B348 Pure Titanium Round Bar Suppliers need to be identified, analysed as well as reported in the chemical analysis of the material. Specimens that are to be selected from the ASTM B348 Titanium Cold Drawn Bar for performing tension tests need to be machined.

Additionally, the tensile properties  of the ASTM B348 Titanium Hot Rolled Bar are to be determined by using a specified strain rate through the yield strength and that too should be determined at an increasing rate.

 

Types of Titanium round bar

Titanium Alloy  Rod
Titanium Alloy Rod
Titanium  Hex Bar
Titanium Hex Bar
Titanium Alloy Round Bar
Titanium Alloy Round Bar
ASTM B348 Ti Alloy Flat Bar
ASTM B348 Ti Alloy Flat Bar
 Titanium Bar Material
Titanium Bar Material
Pure Titanium Rounds
Pure Titanium Rounds
Titanium ASTM B348 Square Bar
Titanium ASTM B348 Square Bar
ASTM B348  Titanium Annealed Bar
ASTM B348 Titanium Annealed Bar
Titanium Alloy Polished Bar
Titanium Alloy Polished Bar
Pure Titanium Bright Bar
Pure Titanium Bright Bar
 Titanium Alloy Round Bar Cold Drawn
Titanium Alloy Round Bar Cold Drawn
ASTM B348  Ti Alloy Black Bar
ASTM B348 Ti Alloy Black Bar
Titanium  ASTM B348 Round Bar Hot Rolled
Titanium ASTM B348 Round Bar Hot Rolled
ASTM B348 Ti  Flat Bar Hot Rolled
ASTM B348 Ti Flat Bar Hot Rolled
Alloy Titanium Flat Bar Cold Drawn
Alloy Titanium Flat Bar Cold Drawn
ASTM B348 Ti Alloy Square Bar Hot Rolled
ASTM B348 Ti Alloy Square Bar Hot Rolled

 

Titanium round bar suppliers

We can produce Titanium round bar in following forms & shapes:

  • Rod
  • Flat Bars
  • Round
  • Square
  • Channel Bars
  • T-Bars
  • Blocks
  • Precision Ground Bars
  • Rings
  • Hollow
  • Round Rod
  • Rectangular Bar
  • Triangle
  • Hex (A/F)
  • Rectangle
  • Half Round Bars
  • Threaded
  • Billet
  • Profiles
  • I/H Bars
  • Forging
  • Ingot

 

Pure Titanium Round Bar finishes

Titanium Round Bar Surface finish

CD Cold drawn P Polished
BD Bright drawn SRE Slit rolled edge
CG Centreless ground HF Hot finished
CF Cold finished HRAP Hot rolled annealed and pickled
P&T Peeled and turned RT Rough turned/peeled
ST Smooth turned PR Peeled and reeled

 

titanium round bar grade

Titanium Grade 1: is an unalloyed, low quality titanium item containing low oxygen with high formability; this titanium grade is utilized in airframes, heat exchangers and desalination units.

Titanium Grade 2: is an unalloyed, medium quality titanium item. This titanium grade is utilized in airframes, aircraft motors, and marine parts; great weldability and corrosion resistance are its recognizing characteristics.

Titanium Grade 3: is an unalloyed, high quality, titanium product giving great corrosion resistance and great weldability. This titanium grade is basically utilized in airframe and aircraft engine parts.

Titanium Grade 4: is the most elevated quality pure unalloyed titanium item. This titanium grade is utilized nearly only for airframe, airplane engine parts, marine, surgical inserts, hydraulic tubing. Great formability and corrosion resistance are its trademark.

Titanium Grade 5 (6AL-4V) is an alloyed titanium item containing 6% Aluminum and 4% Vanadium; may be a medium quality item. This titanium grade is predominantly utilized in airframe and turbine engine parts; and for utilize in surgical implants.

  • AKA Titanium 6-4, Ti 6-4, Titanium Grade 5
  • Bar: AMS 4928, MIL-T-9047 6-4, AMS-T-9047 6-4, AMS 6931, ASTM B 348, ASME B348, AMS 4967 (capable of heat treat)

8AL–1V–1Mo (8-1-1)is an alloyed titanium product containing 8% Aluminum, 1% Molybdenum and 1% Vanadium.

  • AKA Ti 8-1-1-1 Single Annealed
  • Bar – AMS-T-9047, AMS 4972, AMS 4973 Heat Treated

6AL–2Sn–4Zr–2Mo (6-2-4-2)is an alloyed titanium product containing 6% Aluminum, 2% Tin, 4% Zirconium, 2% Molybdenum.

15V–3Cr–4AL–3Sn (15-3-3-3)is an alloyed titanium product containing 15% Vanadium, 3% Chromium, 4% Aluminum, 3% Tin.

6AL–6V–2Sn (6-6-2)is an alloyed titanium product containing 6% Aluminum, 6% Vanadium, 2% Tin.

5AL–2.5Sn & ELI (5-2.5)is an alloyed titanium product containing 5% Aluminum and 2.5% Tin. Also ELI (Extra Low Interstitial).

  • AKA Ti 5-2.5, Titanium Grade 6
  • Bar – AMS 4926, MIL-T-9047 Comp 2, ASTM B-348 Grade 6

Titanium 6AL – 4V ELI is an alloyed titanium product containing 6% Aluminum and 4% Vanadium, ELI (Extra Low Interstitial).

  • AKA Titanium ELI, Ti 6-4 ELI, ELI, Medical grade Titanium, Titanium Grade 23
  • Bar Specification: ASTM F 136, AMS 4930, MIL-T-9047 6-4 ELI, AMS 4975, AMS 4976

 

Other types of Titanium round bar stock:

Titanium ASTM B348 Rectangular Bar Titanium Astm B348 Threaded Bar Black
Titanium Round Bar ASTM B348 Titanium Flat Bar
Titanium ASTM B348 Hex Bar Polished Titanium Astm B348 Hexagonal Bar
Titanium Rounds ASTM B348 Titanium Flat Bar Bright
Titanium Bar Titanium Astm B348 Flat Bar Black
Ti Rods ASTM B348 Titanium Flat Bar Cold Drawn
ASTM B348 Bright Bar Titanium Astm B348 Flat Bar Polished
ASTM B348 Ti Alloy Hex Bar Bright Ti Hollow Bar
Titanium Square Bar Cold Drawn Titanium Bright Bar material
Titanium Astm B348 Rod Titanium Flat Bar Annealed
Titanium Astm B348 Hex Bar Annealed Titanium Astm B348 Cold Drawn Round Bar
ASTM B348 Ti Round Bars Titanium Flat Bar stock
Titanium ASTM B348 Rectangular Bar Annealed Titanium Astm B348 Polished Hex Bar
ASTM B348 Titanium Forged Bar Titanium ASTM B348 Polished Bar
Titanium Astm B348 Hex Bar Titanium Threaded Bar
Titanium Square Bar Polished Titanium Bright Bar Hot Rolled

 

Pure Titanium Round Bar Condition

H&T Hardened and tempered.
ANN Annealed
PH Precipitation hardened.

 

Commercially Pure (CP) Titanium Bar Stock

Size (inches) Grade Specification
3/8 Commercially Pure Titanium Bar AMS 4921, AMS-T-9047
1/2 Commercially Pure Titanium Bar AMS 4921, AMS-T-9047
5/8 Commercially Pure Titanium Bar AMS 4921, AMS-T-9047
3/4 Commercially Pure Titanium Bar AMS 4921, AMS-T-9047
7/8 Commercially Pure Titanium Bar AMS 4921, AMS-T-9047
1 Commercially Pure Titanium Bar AMS 4921, AMS-T-9047
1 1/8 Commercially Pure Titanium Bar AMS 4921, AMS-T-9047
1 1/4 Commercially Pure Titanium Bar AMS 4921, AMS-T-9047
1 3/8 Commercially Pure Titanium Bar AMS 4921, AMS-T-9047
1 1/2 Commercially Pure Titanium Bar AMS 4921, AMS-T-9047
1 5/8 Commercially Pure Titanium Bar AMS 4921, AMS-T-9047
1 3/4 Commercially Pure Titanium Bar AMS 4921, AMS-T-9047
1 7/8 Commercially Pure Titanium Bar AMS 4921, AMS-T-9047
2 Commercially Pure Titanium Bar AMS 4921, AMS-T-9047
2 1/8 Commercially Pure Titanium Bar AMS 4921, AMS-T-9047
2 1/4 Commercially Pure Titanium Bar AMS 4921, AMS-T-9047
2 3/8 Commercially Pure Titanium Bar AMS 4921, AMS-T-9047
2 1/2 Commercially Pure Titanium Bar AMS 4921, AMS-T-9047
3 Commercially Pure Titanium Bar AMS 4921, AMS-T-9047
3 1/2 Commercially Pure Titanium Bar AMS 4921, AMS-T-9047
7 Commercially Pure Titanium Bar AMS 4921, AMS-T-9047


Titanium Alloy Round Bar Tolerances

Cold Drawn Pure Titanium Round Bar Tolerance & Steel Hexagon, Flat Tolerance (BS 970-3)

Tolerances for Cold Drawn Titanium Round Bar
Shape / Section Size, diameter or width across flats Permitted variation
mm mm
Round ≥6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 100
+ 0 to - 0.070
+ 0 to - 0.085
+ 0 to - 0.100
+ 0 to - 0.120
+ 0 to - 0.140
Flat (thickness) < 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
+ 0 to - 0.110
+ 0 to - 0.130
+ 0 to - 0.250
+ 0 to - 0.350
Flat (width) < 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 100
> 100 ≦ 130
> 130 ≦ 160
> 160 ≦ 320
+ 0 to - 0.110
+ 0 to - 0.130
+ 0 to - 0.160
+ 0 to - 0.190
+ 0 to - 0.220
+ 0 to - 0.350
+ 0 to - 1.00
+ 1.00 to - 1.00
Square and
hexagon
≥ 6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 105
+ 0 to - 0.090
+ 0 to - 0.110
+ 0 to - 0.130
+ 0 to - 0.160
+ 0 to - 0.250

 

Tolerances of Turned ASTM B348 Titanium Round Bar (BS 970-3)

Turned Titanium round bar Tolerances
Titanium round bar Size, diameter Permitted variation
mm mm
≧ 6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 120
> 120 ≦ 180
> 180 ≦ 250
> 250 ≦ 315
> 315 ≦ 400
> 400
+ 0 to - 0.070
+ 0 to - 0.085
+ 0 to - 0.100
+ 0 to - 0.120
+ 0 to - 0.140
+ 0 to - 0.160
+ 0 to - 0.185
+ 0 to - 0.210
+ 0 to - 0.230
+ 0 to - 0.250

 

Tolerances of Precision Titanium ASTM B348 Round Bar (BS 970-3)

PrecisionTitanium ASTM B348 Round Bar Tolerances
Section Size,
diameter
Permitted overall variation
Class A Class B Class C
mm mm mm mm
Round ≧ 6 <75 0.05 0.025 0.013

 

Tolerance of Titanium Alloy Bright Round Bar (BS EN ISO 286-2 )

Titanium round bar Tolerance ISO “H” Series in MM
NOMINAL SIZE h5 h6 h7 h8 h9 H10 H11 h12
DIAMETER mm
~ to 3 +0.004/0 +0.006/0 +0.01/0 +0.014/0 +0.025/0 +0.04/0 +0.06/0 +0.1/0
over 3 to 6 +0.005/0 +0.008/0 +0.012/0 +0.018/0 +0.03/0 +0.048/0 +0.075/0 +0.12/0
over 6 to 10 +0.006/0 +0.009/0 +0.015/0 +0.022/0 +0.036/0 +0.058/0 +0.09/0 +0.15/0
over 10 to 18 +0.008/0 +0.011/0 +0.018/0 +0.027/0 +0.043/0 +0.07/0 +0.11/0 +0.18/0
over 18 to 30 +0.009/0 +0.013/0 +0.021/0 +0.033/0 +0.052/0 +0.084/0 +0.13/0 +0.21/0
over 30 to 50 +0.011/0 +0.016/0 +0.025/0 +0.039/0 +0.062/0 +0.1/0 +0.16/0 +0.25/0
over 50 to 80 +0.013/0 +0.019/0 +0.03/0 +0.046/0 +0.074/0 +0.12/0 +0.19/0 +0.3/0
over 80 to 120 +0.015/0 +0.022/0 +0.035/0 +0.054/0 +0.087/0 +0.14/0 +0.22/0 +0.35/0
over 120 to 180 +0.018/0 +0.025/0 +0.04/0 +0.063/0 +0.1/0 +0.16/0 +0.25/0 +0.4/0
over 180 to 250 +0.02/0 +0.029/0 +0.046/0 +0.072/0 +0.115/0 +0.185/0 +0.29/0 +0.46/0

 

Titanium Round Bar Sizes

The sizes of Titanium Alloy Bars can also be selected when using the THD model.

Size & Dimensions of Titanium round bar
Metric US Bar ASTM/ Canadian Japanese
Bar Size Diam. (mm) Bar Size Diam. (Inch) Bar Size Diam. (mm2) Bar Size Diam. (mm)
5 5 #2 0.250 10M 100 6 6
5.5 5.5 #3 0.375 15M 200 10 10
6 6 #4 0.500 20M 300 13 13
7 7 #5 0.601 25M 500 16 16
8 8 #6 0.750 30M 700 19 19
9 9 #7 0.875 35M 1000 22 22
10 10 #8 1.000 45M 1500 25 25
11 11 #9 1.125 55M 2500 29 29
12 12 #10 1.250 32 32
14 14 #11 1.375 35 35
16 16 #12 1.500 38 38
18 18 #13 1.601 41 41
20 20 #14 1.750 44 44
22 22 #15 1.875 48 48
25 25 #16 2.000 51 51
28 28 #18 2.250 57 57
32 32
36 36
40 40
44 44
50 50

Prestige quality Titanium round bar suppliers offer variety of shapes such as Round Bar, Square Bar, Hexagonal Bar, Flat Bar, Channels & Hollow Bar.

Type SIZES (mm) SIZES (Inches) ISO Tolerance
Titanium Alloy Cold Drawn and Polish Round Bar 3.00 – 75.00 1/8" – 3.00" h8-h9-h10-h11
Titanium Cold Drawn and Ground Bar 10.00 – 75.00 5/6" – 2.50" h8-h9-h10-h11
ASTM B348 Ti Alloy Peeled and Polished Round Bar 40.00 – 150.00 1.50" – 6.00" h11, h11-DIN 1013
Titanium Alloy Peeled and Ground Bar 20.00 – 50.00 3/4″ – 2.00" h9-h10-h11

Titanium Alloy Bars Standard lengths of 2000 mm up to 6010 mm. Cut to size on request (tolerance +2/-0 mm).

 

ASTM B348 Ti Alloy Round Bar Length

  • Metric system: standard length is 9 - 12 metres
  • USA : 40 feet

 

Titanium Round Bar Weights

Titanium Round Bar Weight Chart

Round Bar
Size Kgs / Foot Kgs / Mtr Size Kgs / Foot Kgs / Mtr Size Kgs / Foot Kgs / Mtr
3mm 0.017 0.055 20mm 0.753 2.470 3" 10.900 35.762
1/8" 0.019 0.062 22mm 0.908 2.979 3-1/4" 12.800 41.996
5/32" 0.029 0.095 7/8" 0.926 3.038 3-1/2" 14.850 48.772
4mm 0.030 0.098 24mm 1.080 3.543 3-3/4" 17.001 55.780
3/16" 0.043 0.141 25mm 1.180 3.871 4" 19.306 63.340
5mm 0.047 0.154 1" 1.210 3.970 4-1/4" 21.908 72.249
7/32" 0.058 0.190 26mm 1.271 4.170 4-1/2" 24.4487 80.340
6mm 0.068 0.223 27mm 1.368 4.490 4-3/4" 27.366 90.249
1/4" 0.076 0.249 1-1/8" 1.534 5.033 5" 30.461 99.940
7mm 0.091 0.298 30mm 1.691 5.548 5-1/2" 36.690 121.000
5/16" 0.118 0.387 1-1/4" 1.924 6.349 6" 43.860 143.900
8mm 0.120 0.398 32mm 1.894 6.314 6-1/2" 51.093 167.630
9mm 0.152 0.498 1-3/8" 2.303 7.550 7" 59.432 196.000
3/8" 0.170 0.557 35mm 2.390 7.553 7-1/2" 68.226 225.000
10mm 0.189 0.620 36mm 2.438 7.999 8" 77.586 254.55
11mm 0.228 0.748 38mm 2.792 8.903 10" 121.048 397.140
7/16" 0.232 0.761 1-1/2" 2.715 8.951      
12mm 0.271 0.889 40mm 3.009 9.872      
1/2" 0.303 0.994 1-5/8" 3.200 10.449      
13mm 0.318 1.043 1-3/4" 3.712 12.179      
14mm 0.368 1.207 45mm 3.807 12.555      
9/16" 0.383 1.256 1-7/8" 4.260 13.977      
15mm 0.424 1.391 48mm 4.330 14.205      
5/8" 0.473 1.551 50mm 4.698 15.414      
16mm 0.481 1.578 2" 4.848 15.906      
17mm 0.543 1.791 2-1/8" 5.475 17.963      
11/16" 0.573 1.880 2-1/4" 6.135 20.128      
18mm 0.610 2.001 60mm 6.768 22.205      
3/4" 0.682 2.237 2-3/8" 6.838 22.435      
      2-1/2" 7.576 24.856      
      2-5/8" 8.354 27.409      
      2-3/4" 9.169 30.083

 

Titanium round bar Equivalent

Grades UNS Grades UNS
CP Grade 1 R50350 CP Grade 2 R50400
CP Grade 3 R50550 CP Grade 4 R50700
Titanium Grade 6 R54520 CP Grade 7 R52400
Titanium Grade 9 R56320 CP Grade 11 R52252
CP Grade 12 R53400 CP Grade 16 R52402
CP Grade 17 R52252 CP Grade 26 R52404
CP Grade 27 R52404 Titanium Grade 28 R56323
Titanium Grade 29 R56404 Ti-10V-2Fe-3Al R56410
Ti-13V-11Cr-3Al3-8-6-44 R58010 Ti-2.5Cu
Ti-3Al-8V-6Cr-4Mo-4Zr Ti-4Al-4Mo-2Sn
Ti-5-2.5Sn ELI R54521 Ti-5.8Al-4.0Sn-3.5Zr-0.7Nb-0.5Mo-0.35Si-0.06C
Ti-5Al-1Sn-1Zr-1V-0.8Mo Ti-5Al-2Zr-2Sn-4Mo-4Cr R58650
Ti-6Al-2Sn-2Zr-2Mo-2Cr-0.15Si R56222 Ti-6Al-2Sn-4Zr-2Mo R54620
Ti-6Al-2Sn-4Zr-6Mo R56260 Ti-6Al-4V R56400
Ti-6Al-4V ELI R56407 Ti-6Al-6V-2Sn R56620
Ti-6Al-7Nb R56700 Ti-7Al-4Mo R56740
Ti-8Al-1Mo-1V R54810 TIMETAL 21S

CP Grades Ti Alloys
Grade 1 6Al-4V or Grade 5
Grade 2 6AL-4V ELI or Grade 23
Grade 3 Grade 12
Grade 4 5Al-2.5Sn
Grade 7 6Al-2Sn-4Zr-2Mo
Grade 11 15V-3Cr-3Sn-3Al
  8Al-1Mo-1V
  3Al-2.5V
  6Al-6V-2Sn
  3Al-8V-6Cr-4Mo-4Zr
  13V-11Cr-3Al

 

Grade Trade Name
Grade 1  
Grade 2  
Grade 3  
Grade 4  
Grade 5 6AL-4V
Grade 6 5AL2.5Sn
Grade 7  
Grade 9 3AL2.5V
Grade 19 Beta C
Grade 23 (6AL4V) Eli
6AL 2Sn 4Zr 2Mo 2Sn 4Zr 2Mo
6AL 6V 2Sn 6V 2Sn
10V 2Fe 3Al 2Fe 3Al
8Al 1Mo 1V 1Mo 1V
6AL 2Sn 4Zr 6Mo 2Sn 4Zr 6Mo

 

Titanium round bar Material Properties

Ti Round Bar Chemical Composition

Grade C N O H Ti Fe
Gr 1 .08 Max .03 Max .18 Max .015 Max Bal .20 Max
Gr 4 .08 Max .05 Max .40 Max .015 Max Bal .50 Max
Gr 7 .08 Max .03 Max .25 Max .015 Max Bal .30 Max
Gr 9 .08 Max .03 Max .15 Max .015 Max - .25 Max
Gr 12 .08 Max .03 Max .25 Max 0.15 Max - .30 Max

Mechanical Properties of Titanium ASTM B348 Round Bar

Grade Tensisle Strength Yield Strength

Elogation In 2 In. Or 50mm Min.,%

Bend Test
Min Min Min Min Max Max

Under 0.070 In. (1.8mm) Thickness

0.070 To 0.187 In. (1.8mm To 4.75mm) Thickness

Ksi Mpa Ksi Mpa Ksi Mpa
1 35 240 20 138  45 310   24  1.5T 2T 
2 50 345 40 275  65 450  20   2T 2.5T 
3 65 450 55 380  80 550  18   2T 2.5T 
4 80 550 70 483  95 655  15   2.5T 3T 
5 130 895 120  828 ... ...  10  4.5T 5T 
7 50 345 40 275  65 450   20  2T 2.5T 
9 90 620 70 483  ...  ...   15  2.5T 3T 
12 70 483 50  345  ... ...   18  2T 2.5T 

 

Titanium Round Bar for Sale

Titanium ASTM B348 Rectangular Bar Bright Ti Bright Bar Hollow
Titanium ASTM B348 Hex Bar Black ASTM B348 Square Rod
Titanium ASTM B348 Threaded Bar M12 Titanium ASTM B348 Threaded Bar Stock
ASTM B348 Ti Rectangular Bar Polished Titanium ASTM B348 Polished Round Bar
Titanium ASTM B348 Square Bar ASTM B348 Ti Alloy Polished Flat Bar
ASTM B348 Ti Threaded Bar M16 Titanium Threaded Rods
ASTM B348 Ti Alloy Rectangular Bar stock ASTM B348 Titanium Polished Bar Stock
Titanium ASTM B348 Rectangular Bar Cold Drawn ASTM B348 Titanium Polished Square Bar
ASTM B348 Ti Alloy Square Bar Black Titanium ASTM B348 Black Bar
ASTM B348 Square Bar Annealed Titanium Bright Bar Flat
Ti Rectangular Bar Black ASTM B348 Bright Bar Hex
Titanium Square Bar Bright ASTM B348 Titanium Bright Bar Cold Drawn
ASTM B348 Titanium Hex Bar Cold Drawn ASTM B348 Ti Triangular Bar

 

Titanium Alloy Round Bar Uses

There are many sectors and industries consuming ASTM B348 Titanium Round Bar like:

ASTM B348 Round Bar for manufacturing gears, bearings, and hinges Ti Round Bar to produce Cold headed components
Railway engines and coaches Titanium Round Bar to making arms and ammunition
Titanium bright bar used for Automobile Industries to make nuts, bolts, shafts Heavy engineering Industries
Textile industry Titanium bright bar used for Electric pumps / motors
Titanium ASTM B348 Round Bar to manufacturing conveyor shafts Titanium Rod are also used in Agricultural sector

 

We are one of favourite supplier of Titanium round bar in following States

Kerala
Karnataka
Andhra Pradesh
Gujarat
Maharashtra
Uttar Pradesh
Jharkhand
Bihar
Noida
Delhi 
Tamil Nadu
West Bengal

 

Preferred supplier and distributor of ASTM B348 Ti Alloy Rod in following countries

Iraq
United Arab Emirates
Bahrain
Kuwait
Oman
Saudi Arabia(KSA)
Qatar

 

Ready Stock of Titanium Alloy Rod, stockholder of titanium Forged Round Bars in India, wholesaler of Titanium Alloy Hexagon Bars in Mumbai
Hot sale of ASTM B348 Titanium Hot Rolled Bar, stockist of Titanium Alloy Round Rod, suppliers of titanium Cold Finished Bar, dealer of Titanium Alloy Spring Steel Bar