2507 Super Duplex Plate

Accept all small/ Large Orders of ASTM A240 Type Super Duplex 2507 Plate, SA 240 GR 2507 Sheet, 2507 Coil suppliers, Super Duplex Steel S32760 Strip manufacturer in India

Buy Certified & Tested SA 240 GR 2507 Plate, Duplex 2507 Sheet stockist in Mumbai, India, Super Price Manufacturer of ASTM A240 Type 2507 Duplex Plate, AISI S32760 Foil, check SA 240 GR 2507 Shim Sheet Price in India

The specification for ASTM A240 envelopes several chromium as well as chromium alloy based stainless steel grades. This specification covers the fore mentioned alloy that has been manufacture in the form of ASTM A240 Type 2507 Super Duplex Plate, sheet, or strips.. Generally the ASTM A240 specified 5mm Thick Cold Rolled Super Duplex 2507 Sheet have been designed for use in applications that involve not only pressure vessels but also general applications.

Table Of Content

Specialise in distributing Hot rolled Saf 2507 Plate, Check No. 1 Finish ASTM A240 Type 2507 Coil Price List, 2507 Super Duplex Sheet manufacturers, Avesta 2507 Shim Sheet importer in India, supplier of Thick Duplex Alloy 2507 Cold Rolled Sheet and ASME SA240 Super Duplex Steel S32750 Strip Tape

 

The material is also highly recommended to clients all over the world by super duplex 2507 plate suppliers in Mumbai. This is because the suppliers understand that the Super Duplex Steel S32760 Strip is able to offer several valuable properties such as its resistance to chloride ion related stress corrosion cracking, to erosion corrosion, to corrosion fatigue, not forgetting the ability of the SA 240 GR 2507 Shim Sheet to resist general corrosion in acidic medium as well. This stainless steel Duplex 2507 Stainless Steel Coils are also known to have good weldability properties and very high mechanical strength.

The impact strength of the Super Duplex Steel S32750 Plates is also high. Besides these properties, the super duplex plate offers high thermal conductivity along with a low coefficient of thermal expansion. Although one needs to note that  the SA 240 GR 2507 Sheet is not usually recommended by suppliers for applications which involve long exposures to temperatures above a range of 570°F due to the alloy having a risk of a reduction in toughness.

 

---

Price list of Super Duplex 2507 Plate in India	UNS S32760 Super Duplex 2507 Plate Price in India (INR) per unit	Saf 2507 Plate Price in UK Pound sterling	SA 240 GR 2507 Plate Price in UAE Dirham
2507 Super Duplex Plate price per kg in India	INR 550-700 / Kg	USD $ 7-11 /Kg	AED 29-37 UAE Dirham

This is an approximate Cost of Saf 2507 Sheet in India. For factory price buy directly from Super Duplex 2507 Plate manufacturers in India, check latest ASTM A240 Type 2507 Super Duplex Plate price list & stock sizes please mail us.

 

---

Super Duplex 2507 Plate Standards	ASTM/ ASME: A240 - UNS S32750 EURONORM: 1.4410 - X2 Cr Ni MoN 25.7.4 AFNOR: Z3 CN 25.06 Az
Material	2507 Super Super Duplex Sheet & 2507 Super Super Duplex Plate
Super Duplex 2507 Sheet & Plate Specification	ASTM A240 / ASME SA240
Standard Super Duplex 2507 Plate & Sheet Sizes	1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm
Tolerances of Width and thickness	EN 10151 Super Duplex 2507 strip for springs EN 10088 Super Duplex 2507 strip (general) EN 10258 (formerly DIN 59381)
Width	10-2500mm
SA-240 Super Duplex 2507 Plate & Sheet Thickness	0.1mm to 100 mm Thk
SA 240 Type 2507 Plate & Sheet Length	2m, 2.44m, 3m, or as required
SA 240 GR 2507 Plate & Sheet Finish	2B, 2D, BA NO(8), SATIN (Met with Plastic Coated), Cold rolled sheet (CR), Hot rolled plate (HR), No.1 finish hot rolled 2507 Super Duplex Plate, 2B, 1D, BA, No.4, 8K, hairline, satin, brush, mirror etc.
SA 240 TP 2507 Plate & Sheet Hardness	Quarter Hard, Half Hard,Spring Hard, Soft, Hard, Super Duplex 2507 Sheet suppliers
Stock available in form of	Shim Sheet, Rolls, Strip, Flats, Clad Plate, Plain Sheet, Plate, Sheet, Coils, Foils, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Blank (Circle), soft annealed, sheared, annealed, tread plate,descaled, Checker Plate
Profiling	To provide a full profiling service in India we use numerous profiling methods including: Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting
Avesta 2507 Plate & Sheet Manufacturers	Sail, Jindal, Shah Alloys, Outokumpu, BAOSTEEL, TISCO, JISCO, LISCO, POSCO, ZPSS
Plasma profiles	As per customer's drawings
Value added services for Super Duplex 2507 Sheet & Plate	Plasma cutting, Waterjet cutting, Bending and mechanical processing, Laser cutting, welding, edge preparation, sawing and shearing.
Value added services for Super Duplex 2507 Coil	Slitting Cut-to-length Blanking  Polishing
Why choose Metal tube?	The third party inspection is accepted. Mill Test Certificate is supplied with shipment. Free sample is available. (Yes, we could offer the sample for free charge but do not pay the cost of freight.) Minimum Nitrogen content and Ferrite Count Test Tested to ASTM A923 Method "C" or ASTM G48 Method "A".
Specialized in	ASTM A240 Type 2507 Super Duplex Clad plate: ASTM A240 Type 2507 Super Duplex Clad plate is a composite steel plate made by bonding ASTM A240 Type 2507 Super Duplex plate, etc. ASTM A240 Type 2507 Super Duplex Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width; ASTM A240 Type 2507 Super Duplex Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width. ASTM A240 Type 2507 Super Duplex Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width;
Delivery time	Generally it is 7-10 days if the Super Duplex 2507 Sheet & Plate are in stock. or it is 15-20 days if the Super Duplex 2507 Plate & Sheet are not in stock, it depends to quantity.

 

---

The steel ASTM A240 Type 2507 Duplex Plate must conform to the chemical composition requirements which have been specified in the standard. The material, in this case Thick Duplex Alloy 2507 Cold Rolled Sheet has to also conform to the mechanical properties that have been specified. Stainless steel mill finished Duplex 2507 Plate  was designed mainly to handle highly corrosive conditions, especially in those situations were high tensile strength properties is considered to be required.The higher contents of elements such as molybdenum, chromium and nitrogen in No. 1 Finish ASTM A240 Type 2507 Coil enables the material to withstand pitting and crevice corrosion as well.

 

---

 

---

UNS S32760 Super Duplex 2507 Plate density

0.28 lb/in3

 

---

ASTM A240 Type 2507 Super Duplex Plate melting range

2570 - 2660 °F (1410 - 1460 °C)

 

---

we stock following Types of Super Duplex 2507 Plate:

Polished Super Duplex 2507 Plate	SA 240 GR 2507 Checker Plate
ASTM A240 Type 2507 cold rolled sheet	Super Duplex 2507 Hot Rolled Coil, Strip And Plate
Super Duplex 2507 Foil	Super Duplex 2507 2B Sheet
ASTM A240 Type 2507 Clad Plate	ASTM A240 Type 2507 Flat Sheet
SA 240 GR 2507 Plate Suppliers	Saf 2507 Coil
Super Duplex 2507 Coils	SA 240 GR 2507 Coil
Super Duplex 2507 Sheet	Super Duplex 2507 Coil
Super Duplex 2507 Checker Plate	Super Duplex 2507 Quarto Plate
Saf 2507 Shim Sheet	Super Duplex Steel 2507 Sheet
Super Duplex 2507 Corrugated Sheet	Super Duplex Saf 2507 Expanded Sheet
Super Duplex 2507 Hot rolled plate	Super Duplex Steel 2507 Rolling Sheet
Cold Rolled Saf 2507 Sheet Suppliers	Super Duplex 2507 Checker Plate
ASTM A240 Type 2507 Chequer Plate	Super Duplex 2507 Plate
SA 240 GR 2507 B. Q. Profile	Super Duplex 2507 Coil
Super Duplex 2507 Rolls Sheet	Super Duplex 2507 Foil Rolls
Saf 2507 Chequered Plate	ASTM A240 Type 2507 Clad Plate
25cr Super Duplex Sheet	Super Duplex 2507 Clad Plate
Super Duplex 2507 Plate	Super Duplex 2507 Rolling Sheet
SA 240 GR 2507 Sheet	Super Duplex Saf 2507 Rolling Sheet
Super Duplex 2507 Checker Plate	Super Duplex 2507 Coil Slitting
Super Duplex 2507 Stainless Steel Coil	Avesta 2507 Coil
Super Duplex 2507 Coil	Super Duplex 2507 Strips
Super Duplex 2507 Flat Strip	Super Duplex Saf 2507 Bbq Plate
Super Duplex 2507 Stainless Steel Chequered Plate	Super Duplex 2507 Stainless Steel Strips
Super Duplex 2507 Etching Sheet	Super Duplex 2507 Floor Sheet
Super Duplex 2507 Rolling Plate	Super Duplex 2507 Precision Strip
Decorative 25cr Super Duplex Sheet	Mirror Finish Super Duplex 2507 Sheet
Avesta 2507 Strips	ASTM A240 Type 2507 Strips
F55 Super Duplex Sheet	F55 Super Duplex Diamond Plate
Saf 2507 Perforated Plate	Super Duplex 2507 Chequered Plate
ASTM A240 Type 2507 Rolling Plate	ASTM A240 Type 2507 Precision Strip
Saf 2507 Strips	Super Duplex 2507 Stainless Steel Strips
ASTM A240 Type 2507 Rolling Sheet	Super Duplex 2507 F55 SS Rolling Sheet
Super Duplex 2507 Stainless Steel Rolling Sheet	saf 2507 Super Duplex stainless steel Rolling Sheet
Avesta 2507 Strips	Super Duplex 2507 Strips
Super Duplex 2507 Rolling Sheet	Super Duplex 2507 Rolling Sheet
Super Duplex 2507 Sheet	Saf 2507 Sheet
Chequer Plate Super Duplex Alloy 2507	Super Duplex 2507 Stainless Steel Sheet
Super Duplex 2507 Rolling Sheet	Super Duplex 2507 Chequered Plate
Super Duplex 2507 Mirror Sheet	Super Duplex 2507 Patterned Sheet
Super Duplex 2507 Shim Stock	Super Duplex 2507 Flat Shim
Saf 2507 Hot rolled plate	Hot rolled plate Super Duplex 2507 F55
Avesta 2507 Sheet	Super Duplex Alloy 2507 Sheet
Super Duplex 2507 Hot rolled plate	Super Duplex 2507 Hot rolled plate
Embossed Super Duplex 2507 Sheet	Thin Super Duplex 2507 Sheet
Super Duplex 2507 Perforated Sheet	Saf 2507 Perforated Sheet
Super Duplex 2507 Stainless Steel Hot rolled plate	Avesta 2507 Hot rolled plate
Super Duplex Alloy 2507 Hot rolled plate	Super Duplex 2507 Perforated Sheet
Avesta 2507 Perforated Sheet	Super Duplex Alloy 2507 Perforated Sheet
Super Duplex 2507 Clad Plate	Super Duplex 2507 Clad Plate
F55 Super Duplex Hairline Sheet	No.4 Super Duplex 2507 Sheet
Perforated Sheet Super Duplex 2507 F55	Super Duplex 2507 Stainless Steel Perforated Sheet
Super Duplex 2507 Stainless Steel Clad Plate	Avesta 2507 Clad Plate
Super Duplex Alloy 2507 Clad Plate	Super Duplex 2507 Plate
Super Duplex 2507 Checker Plate	Super Duplex 2507 Shims
Clad Plates Super Duplex 2507 F55	Saf 2507 Clad Plate
Plate Super Duplex 2507 F55	Super Duplex 2507 Stainless Steel Plate
Avesta 2507 Plate	Super Duplex Alloy 2507 Plate
Super Duplex 2507 Design Sheet	25cr Super Duplex Shim Stock
Super Duplex 2507 Plate	ASTM A240 Type 2507 Flat Sheet

 

---

Stocked Sizes
Size (in inches)	Size (in mm)
.125"	3.18mm
.134"	3.40mm
.156"	3.96mm
.187"	4.75mm
.250"	6.35mm
.312"	7.92mm
.375"	9.53mm
.500"	12.7mm
.600"	15.9mm
.750"	19.1mm
.875"	22.2mm
1"	25.4mm
1.125"	28.6mm
1.250"	31.8mm
1.500"	38.1mm
1.750"	44.5mm
2"	50.8mm
2.500"	63.5mm
3"	76.2mm

Dimensions: widths 1000/1220/1500 mm, lengths 2000/2500/3000 mm.

---

super Duplex 2507 Plate grades have good weldability and suitable to welded using other common welding methods such as :

• Gas metal arc welding MIG (GMAW)
• Shielded metal arc welding (SMAW)
• Resistance welding
• Laser welding
• Submerged arc welding (SAW)
• Gas tungsten arc welding TIG (GTAW)
• Plasma arc welding (PAW)
• Flux-cored arc welding (FCW)
• High-frequence welding

 

---

ASTM A240 Type 2507 Super Duplex Plate Imperial Dimensions

Surface finish	Thickness (in)	Width (in)
1 – 2507 Super Duplex Hot rolled, heat treated, pickled Plate & Sheet	.1000 – .3750	max. 72
2R – 2507 Super Duplex Cold-rolled, bright-annealed Sheet & Plate	0.002–0.06	0.118–25.551
2H – 2507 Super Duplex Work hardened Plate & Sheet	0.002–0.06	0.118–24.803
2B – 2507 Super Duplex Cold rolled, heat treated, pickled, skin passed Sheet & Plate	10–24	max. 72*
2D – 2507 Super Duplex Cold rolled, heat treated, pickled Plate & Sheet	12–24	max. 60
BA Mexinox only	18–28	max. 48
Deco Rolled-On Mexinox only	14–28	max. 48
2507 Super Duplex Polished Plate & Sheet (not brushed)	11–24	max. 60
Temper rolled Mexinox only	13–29	max. 48

ASTM A240 2507 Super Duplex Plate Metric Dimensions

Surface finish	Thickness (mm)	Width (mm)
2507 Super Duplex 1D – Hot rolled, heat treated, pickled Plate & Sheet	2.4–12.7	max. 2032
2R – 2507 Super Duplex Cold-rolled, bright-annealed Sheet & Plate	0.05–1.50	3–649
2H – 2507 Super Duplex Work hardened Plate & Sheet	0.05–1.50	3–630
2B – 2507 Super Duplex Cold rolled, heat treated, pickled, skin passed Sheet & Plate	0.25–8.0	max. 2032
2D – 2507 Super Duplex Cold rolled, heat treated, pickled Plate & Sheet	0.4–6.35	max. 1524
2E – 2507 Super Duplex Cold rolled, heat treated, mechanically descaled Sheet & Plate	0.4–8.0	max. 2032
2R – 2507 Super Duplex Cold rolled, bright annealed Plate & Sheet	0.25–3.5	max. 1524
2H – 2507 Super Duplex Work hardened Sheet & Plate	0.4–6.35	max. 1524
2507 Super Duplex Polished, brushed Plate & Sheet	0.5–4.0	max. 1524
Deco	0.3–3.5	max. 1524
2507 Super Duplex Coil	0.30–3.5	max. 1,524

 

in a variety of thicknesse available shown below:

0.5 mm 0.6 mm 0.8 mm 1.0 mm 1.2 mm 1.5 mm 1.6 mm 1.8 mm 2.0 mm 3.0 mm

4.0 mm 5.0 mm 6.0 mm 8.0 mm 10.0 mm 12.0 mm 15.0 mm 20.0 mm 25.4 mm

---

Chemical Composition of ASTM A240 Type 2507 Super Duplex Plate

C	Cr	Ni	Mo	N	Others
0.020	25	7	4.0	.27	S=0.001

 

ASTM A240 Type 2507 Super Duplex Plate Mechanical Properties in annealed condition

Ultimate Tensile Strength, ksi	116 min.
0.2% Offset Yield Strength 0.2%, ksi	80 min.
0.1% Offset Yield Strength 0.2%, ksi	91 min.
Elongation in 2 inches, %	15 min.
Hardness Rockwell C	32 max.
Impact Energy, ft.-lbs.	74 min.

Duplex 2507 Sheet Low Temperature Impact Properties

Temperature °F	RT	32	-4	-40
Ft-lbs	162	162	155	140
Temperature °F	-76	-112	-148	-320
Ft-lbs	110	44	30	7

 

2507 Duplex Plate Physical Propertries

Density	lb/in3	0.28
Modulus of Elasticity	psi x 106	29
Coefficient of Thermal Expansion 68-212°F/°F	x10-6/°F	7.2
Thermal Conductivity	Btu/h ft °F	8.7
Heat Capacity	Btu/lb/°F	0.12
Electrical Resistivity	W-in x 10-6	31.5

 

2507 Super Duplex Plate Hardness (Typical Values)

Average (5)

HV10 180-230

HB : 180-230

HRC _ 20

 

Super Duplex 2507 Plate Toughness Values (KCV Minimum Values)

Temp.	-50°C	+20°C	-60°F	+70°F
Single	75 J/cm_	90 J/cm_	54 ft. lbs	65 ft. lbs
Average (5)	90 J/cm_	150 J/cm	65 ft. lbs	87 ft. lbs

 

Elevated Temperature Tensile Properties of Super Duplex 2507 Sheet

Temperature °F	68	212	302	392	482
0.2% Offset Yield Strength, ksi	80	65	61	58	55
Ultimate Tensile Strength, ksi	116	101	98	95	94

Values obtained for hot rolled plates (th ≤ 2"). Alloy 2507 must not be used for a long time at temperatures higher than 300°C (572°F), where precipitation hardening phenomenon occurs.

2507 Super Duplex Plate Hot forming
2507 should be hot worked between 1875°F and 2250°F. This should be followed by a solution anneal at 1925°F minimum and a rapid air or water quench.

 

Duplex 2507 Plate Cold Forming
Most of the common stainless steel forming methods can be used for cold working 2507.

 

---

STANDARD	WERKSTOFF NR.	UNS
Super Duplex 2507 Plate / Sheet	1.4410	S32750 / S32760

 

---

• Thickness greater than 6.35 mm is called a Super Duplex 2507 Plate.
• Thickness greater than 0.15 mm and less than 6.35mm is called a Super Duplex 2507 Sheet.
• Thickness less than 0.15mm is called a Super Duplex 2507 Foil.

 

---

Super Duplex

Duplex 2507 may be a super duplex stainless steel planned for applications which request uncommon quality and corrosion resistance.

Super Duplex Compositions (percentages)

 

Inconel

Inconel is a family of austenitic nickel-chromium-based superalloys.

Inconel Composition

 

• Flue Gas Scrubbing Equipment
• Offshore Oil production/technology
• Oil and gas industry equipment
• Desalination Equipment
• Chemical process pressure vessels, piping and heat exchangers
• Pulp & Paper Mill Equipment
• Marine Applications

 

---

• Good general corrosion resistance
• High Strength
• High resistance to chloride stress corrosion cracking
• Superior resistance to chloride pitting and crevice corrosion
• Low rate of thermal expansion
• Good weldability and workability
• Combination of properties given by austenitic and ferritic structure
• Suggested for applications up to 600° F

 

---

Andhra Pradesh	Uttar Pradesh	Delhi	Bihar
Gujarat	Maharashtra	Kerala	Noida
West Bengal	Tamil Nadu	Jharkhand	Karnataka

 

---

Qatar	Iraq	Saudi Arabia(KSA)	Oman
Kuwait	United Arab Emirates	Bahrain

 

Held wide Stock of Duplex 2507 Plate, Super Duplex Steel S32760 Coils, manufacturers of Duplex 2507 Stainless Steel Coils, Saf 2507 Plate wholesaler in Mumbai. stockholder of Super Duplex Steel S32750 Plates in India.

wide range of Super Duplex Steel S32760 Sheet and Super Duplex Steel UNS S32750 Clad Plate dealer, Super Duplex Steel S32750 Shim Sheets stockist and traders of Super Duplex Steel Werkstoff No 1.4410 Coil.