titanium tube manufacturers, 1.375 id titanium tube for sale, suppliers of titanium alloy welded tubing, B338 Titanium Alloy Seamless Tubing manufacturers in india
buy 35mm titanium tube, Manufacturer of 1.5 od titanium tube, check titanium alloy tubing Price in India, Stockist of titanium tube astm b338 in Mumbai, India
Titanium Electropolish Tubes have been covered by specification ASTM b338. This specification also covers an additional 28 grades of seamless as well as titanium alloy welded tubing. titanium tube manufacturers in India use the ASTM b338 standard for the manufacture of surface condensers, evaporators, and heat exchangers.

Titanium Tubes

Titanium Seamless Tube

Titanium Alloy Tubing
Table Of Content
- Titanium Tube Specification
- Titanium Tube Price in India
- What is Titanium Tubing?
- Types of Titanium Tube
- Titanium Tubing
- ASTM B338 Titanium Tube
- 1.375 id titanium Mortar Tube
- ASTM B338 Titanium Instrument Tubing
- titanium alloy Heat Exchanger Tubes
- Ti Alloy Capillary Tube
- ASTM B338 Titanium Exhaust Tubing
- Titanium Alloy Square Tube
- Titanium Seamless Tube
- Titanium NCF Rectangular Tubing
- Titanium Furnace Tube
- B338 Titanium Alloy Radiant Tube
- Titanium Alloy Gas Tube
- Titanium ERW Tube
- Titanium Alloy Round Tube
- ASTM B338 Titanium Welded Tube
- Titanium Bright Annealed Tube
- ASTM B338 Titanium Electropolished Tubes
- Titanium Gas Tube Ar 15
- ASTM B338 Titanium High Pressure Tubing
- Small Diameter 1.375 id titanium Tubing
- ASTM B338 Titanium Square Tubing
- Titanium Capillary Tubing
- Titanium Bourdon Tube
- Titanium Tubing Welding
- Titanium Tubing Pressure Rating
- ASTM B338 Titanium Tube Sizes
- 1.375 id titanium Tube mechanical properties
- Titanium Tube Composition
- Titanium Tube For Sale
- Difference Between Inconel and Titanium
Manufacturers of Titanium Seamless Tubes and Titanium Tubing, Special price for Titanium NCF Tubes, importer of Ti Alloy ERW Tube in India
According to the specification B338 Titanium Alloy Seamless Tubing is to be produced from hollow billet by either a cold reducing process or a cold drawing process. These processes are ones will yield a product, in this case the titanium tube astm b338, which meets the requirements prescribed in the specification.
Commercially pure grades of titanium, in this case Ti Alloy ERW Tube can have an ultimate tensile strength of about 434 Mpa. Which means the tensile strength of CP or commercially pure titanium tubes is equal to that of the more conventionally used low grade steel alloys, but have a lower density. 1.375 id titanium tube is about 60% denser in comparison to metal aluminium, although, titanium is more than two times as strong as the latter.
Machining a 35mm titanium tube requires precautions, which needs to be followed by manufacturers and buyers alike. This is because the material used in the production of 1.5 od titanium tube can gall, unless precautions such as sharp tools and proper cooling methods are used during the process of machining. Like steel structures such as tubes, those made from titanium tubes have a fatigue limit which guarantees longevity only in some applications.We are one of the largest titanium tubes manufacturers in India.
TITANIUM TUBING | ||
---|---|---|
Sizes: Tube & Tubing Full Range of sizes in all grades |
GRADE | SPECIFICATIONS |
CP-GRADES 2,3,4 | AMS-4941, 4942, BMS-7-21, DMS-1872, 1874, 1898 | |
3AL-2.5V | AMS-4943, 4944, 4945, DMS-2241, B50TF35, PWA-1260 |
|
Titanium Tubing Specifications: AMS 4935, DMS 1650, MIL-T 9047, MIL-T 81556, MMS 1202, AIMS 03-18-011, AMS 4975 (chemistry only) |
ASTM B338 Titanium Tubing Standards | ASTM B338/ ASME SB338, ASTM B338/ ASME SB338 UNS R56400 Tube |
---|---|
Titanium Tubing Grades |
|
ASTM B338 Titanium Seamless Tube Size | 3.35 mm OD To 101.6 mm OD |
ASTM B338 Titanium Welded Tube Size | 6.35 mm OD To 152 mm OD |
ASTM B338 Titanium Tubing Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
Inconel titanium alloy Tube wall thickness | 0.020" –0.220", (special wall thicknesses available) |
Ti Alloy Tubing Length | Single Random, Double Random, Standard & Cut length Tube |
Inconel titanium alloy Tubing Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF |
Form | ‘U’ bent, Hollow, Hydraulic, LSAW, Boiler, Straight Tube, Tube Coil, Round, Rectangular, Square Etc |
Types of Titanium Alloy Tubing | Seamless, ERW, EFW, Welded, Fabricated Tube / Tubing |
Titanium Alloy Tube End | Plain End, Beveled End, Treaded Tube |
Marking | All ASTM B338 Titanium Tubing are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
Application & uses of Titanium Tube | Oil Tube, Gas Tube, Fluid Tube, Boiler Tube, Heat exchanger Tube, |
Value Added Service | Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc. |
Titanium Tube All Grades | Grade 1 Tube Grade 2 Tube Grade 3 Tube Grade 4 Tube Grade 5 Tube Grade 6 Tube Grade 7 Tube Grade 9 Tube Grade 11 Tube Grade 12 Tube 6-2-4-2 Tube |
Specialize in | ASTM B338 Titanium Capillary Tube & Other Odd Size Titanium NCF Heat Exchanger & Condenser Tube |
Test Certificate | Manufacturer Test Certificate Laboratory Test Certificate from Govt. Approved Lab. Under Third Party Inspection |
Manufacturers of Titanium Tube |
|
We can also cut, thread, and groove Titanium NCF Tube to meet your specifications. Titanium Tube Dimension ANSI/ ASME B36.10, B36.19, B2.1 |
ASTM | USA | Ameirican Society of Mechanical Engineers |
AISI | USA | Acronym of American Iron and Steel Institute |
JIS | JP | Japanese Industrial Standards |
DIN | GER | Deutsches Institut für Normung e.V. |
UNS | USA | Unified Numbering System |
- ASTM B338 Grade 1 Titanium Tube
- ASTM B338 Grade 2 Titanium Tube
- ASTM B338 Grade 5 Titanium Tube
- ASTM B338 Grade 9 Titanium Tube
- ASTM B338 Grade 12 Titanium Tube
Titanium Tubing Price | Origin | Price in INR (per kg) |
Price in USD (per kg) |
Price in Euro (per kg) |
Others |
---|---|---|---|---|---|
Titanium Tubing Price in USA | USA | Rs 1800/- | $27 | €23 | Fix Length |
Titanium Tubing Price in India | Indian | Rs 1300/- | $18 | €16 | Cut to Size |
Titanium Tubing Price in UK / Europe | European | Rs 1750/- | $26 | €22 | Fix Length |
Titanium Tubing Price in Japan | Japanese | Rs 1600/- | $24 | €20 | Fix Length |
Please note This is an approximate Cost of Titanium Tube in India. Please feel free to contact us for Free Quote and latest Titanium NCF Tubing price list in India. Also compare our price with other Titanium Alloy Tube suppliers in India & China.
As an alloy, Titanium Round Tubes is recognized for having a high strength to weight ratio. titanium NCF Tubes are considered to be a strong alloy with low density. Additionally, the titanium alloy tubing is quite ductile. The titanium tubing material is paramagnetic in nature. As compared to other metals, titanium alloy tube has a fairly low electrical and thermal conductivity.
Dimension |
Outer Diameter |
Thickness |
Length |
---|---|---|---|
Size Range: |
0.5mm – 330mm |
0.4mm – 10mm |
Max 15m |
Manufacturing Standards |
ASTM B338, ASTM B861, DIN 17 861 |
Surface Finish | Internal Surface(ID) | Exterbal Surface(OD) | |||
Roughness Average(RA) | Roughness Average(RA) | ||||
μ inch | μm | μ inch | μm | ||
MP | Mechanical Polish | 40,32,25,20 | 1.0,0.8,0.6,0.5 | 32 | 0.8 |
EP | Electro Polish | 15,10,7,5 | 0.38,0.25,0.20;0.13 | 32 | 0.8 |
BA | Beight Annealed | 40,32,25,20 | 1.0,0.8,0.6,0.5 | 32 | 0.8 |
AP | Annealed & Pickled | Not defined | Not defined | 40 or Not defined | 1.0 or Not defined |
Dimension | Outer Diameter | Thickness | Length |
---|---|---|---|
Size Range: | 114mm – 20000mm | 0.5mm – 50mm | Max 15m |
Manufacturing Standards | ASTM B338, ASTM B862 |
Titanium Tube Could Be A Reactive Metal; It'll Burn In Pure Oxygen At 600°C And In Nitrogen At Around 800°C. Oxygen And Nitrogen Will Moreover Diffuse Into Titanium Tube At Temperatures Over 400°C Raising The Tensile Quality But Embrittling The Metal. Degreasing Of The Filler Wire For TIG Welding Should Be Done As A Matter Of Course And The Cleaned Wire Handled With Clean Cotton Gloves; Grease And Perspiration From The Fingers Can Cause Neighborhood Defilement And/Or Porosity..
- Welded or Seamless tube for other fabricated pipe spools
- Seamless Titanium Grade 2 Tube for Heat Exchangers.
- Tube for bicycles, golf clubs and other sporting items, condensers, instrumentation.
- Welded Titanium Grade 1 or 2 tube for an exhaust system in your performance street or racing car.
- Welded or Seamless Pipe for HPAL plants in Titanium Grade 2 or Titanium Grade 12
- Forgings, Fittings and Flanges are also available in most grades of Titanium.
Tube O.D. (in.) |
Wall Thickness of Tube (inches) | |||||||
---|---|---|---|---|---|---|---|---|
.028 | .035 | .049 | .065 | .083 | .095 | .109 | .120 | |
Working Pressure (psig) | ||||||||
1/8 | 7900 | 10100 | ||||||
1/4 | 3700 | 4800 | 7000 | 9500 | ||||
5/16 | 3700 | 5400 | 7300 | |||||
3/8 | 3100 | 4400 | 6100 | |||||
1/2 | 2300 | 3200 | 4400 | |||||
3/4 | 2200 | 3000 | 4000 | 4600 | ||||
1 | 2200 | 2900 | 3400 | 3900 | 4300 |
Wall Thickness | Titanium Tube Sizes ( O.D.) |
---|---|
.010 | 1/16" , 1/8" , 3/16" |
.020 | 1/16" , 1/8" , 3/16" , 1/4" , 5/16" , 3/8" |
.012 | 1/8" |
.016 | 1/8" , 3/16" |
.028 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 3/4" , 1" , 1 1/2" , 2" |
.035 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
.049 | 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
.065 | 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3" |
.083 | 1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3" |
.095 | 1/2" , 5/8" , 1" , 1 1/4" , 1 1/2" , 2" |
.109 | 1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2" |
.120 | 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3" |
.125 | 3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 3" , 3 1/4" |
.134 | 1" |
.250 | 3" |
.375 | 3 1/2" |
High quality Titanium Tube suppliers in Mumbai, India offer these Titanium Tube & Tubing in various size range, from thin wall to thick wall Titanium tubes in coils or straight lengths.
Types | Out diameter | Sizes | Length |
---|---|---|---|
Titanium Welded Tube (ERW Tube) (in Stock + Custom Sizes) | 6.35 mm OD To 152 mm OD | As per requirement | Cut to length |
Titanium Seamless Tube (Custom Sizes) | 6.35 mm OD To 101.6 mm OD | As per requirement | Cut to length |
NB Sizes (in stock) | .0035” ~ 8” | 1/8", 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1.25", 1.5", 2", 2.5", 3", 4", 5", 6" | Cut to length |
Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
4.5 G/Cm3 | 1665 °C (3030 °F) | Psi – 39900 , MPa – 275 | Psi – 49900 , MPa – 344 | 20 % |
4.43 G/Cm3 | 1632 °C (2970 °F) | Psi – 128000 , MPa – 880 | Psi – 138000 , MPa – 950 | 14 % |
Grade | C | N | O | H | Ti | Fe |
Titanium Grade 1 | .08 Max | .03 Max | .18 Max | .015 Max | Bal | .20 Max |
Titanium Grade 4 | .08 Max | .05 Max | .40 Max | .015 Max | Bal | .50 Max |
Titanium Grade 7 | .08 Max | .03 Max | .25 Max | .015 Max | Bal | .30 Max |
Titanium Grade 9 | .08 Max | .03 Max | .15 Max | .015 Max | - | .25 Max |
Titanium Grade 12 | .08 Max | .03 Max | .25 Max | 0.15 Max | - | .30 Max |
STANDARD | UNS | WERKSTOFF NR. |
Titanium Gr 2 | R50400 | 3.7035 |
Titanium Gr 5 | R56400 | 3.7165 |
Titanium Mortar Tube |
Medical Tube |
Titanium Umbilicals |
Titanium Polish Tube |
Titanium Heat Exchanger Tube |
Control Lines |
Titanium Aerospace Tube |
Titanium Oil And Gas Tube |
ASME Seamless Tube |
Nuclear Tube |
Nuclear Fuel Tube |
Titanium EFW Tube |
Hydraulic Tube |
High Pressure Tube |
Titanium Header Tubing |
Rectangular Tubing |
Instrumentation Tube |
Electropolished Tube |
Cannula Tube |
Titanium Pyrometer Tube |
Alloy Cold Rolled Coiled Tubing |
Heat-Resistant Capillary Tube |
Titanium Capillary Tube |
Alloy Furnace Tube |
Protective Tube |
Hypodermic Tubing |
Titanium Ar Gas Tube |
Square Tubing |
Heat Exchanger Tube |
Mortar Tube |
Instrumentation Tube |
Coiled Tubing |
ASME SB338 Heat Exchager Tube |
Tubing |
Titanium SCH 40 Tube |
Titanium Extreme Environment Gas Tube |
Elliptical And Oval Tube |
Rectangular Tube |
Titanium SCH 40 Tube |
Titanium Steel Tube |
Titanium Condenser Tube |
ASTM B338 Oil & Gas Tubing |
Titanium High Precision Tube |
Nuclear Control Rod Tube |
Titanium Seamless Hollow Tube |
Electropolished Tube |
Bourdon Tube |
ASME SB338 Capillary Tubing |
Seamless Tubing |
Titanium Gas Tube Ar 15 |
Titanium Cold Drawn Seamless Tube |
Aero Engine Tube |
Titanium Aerospace Engine Tube |
Titanium Furnace Tube |
Titanium Gas Tubing |
Titanium Furnace Tube |
Titanium Seamless Coil Tubing |
Seamless Straight Tubing |
Titanium Hot Finished Seamless Tubing (HFS) |
Titanium Cold Drawn Seamless Tubing (CDS) |
Titanium Precision Tubing |
Titanium High Pressure Tube |
Tube For Precision Components |
Sighting Tube |
Titanium Gas Tube Ar 15 |
Titanium Finned Tube |
High Quality Titanium Seamless Tube |
Square Tube |
Seamless Titanium Tubing |
Titanium Chromium Tubing |
ASME SB338 Round Tube |
Titanium Triangle Tube |
Round Tube |
Titanium Rectangular Tube |
Titanium Thermocouple Tube |
ASME SB338 Polish Tube |
Titanium Hexagonal Tube |
Titanium Hollow Tube |
Titanium Secondary & Surplus Tube |
Outside Polished Tube |
ASME SB338 Cold Drawn Tube |
Titanium Alloy ERW Tube |
Colour Coated Tube |
Welded Tube |
Titanium Furnace Tube |
ASME SB338 Cold Drawn Tube |
ASTM B338 Capillary Tube |
EFW Tube |
Condensers Tube |
Super Heaters |
Titanium Alloy U Shaped Tube |
Exhaust Tubing |
Titanium Alloy Tube |
ASTM Titanium Decorative Tube |
ASME SB338 Instrumentation Tube |
Triangle Tube |
ASTM B338 Capillary Tube |
Titanium Carbine Gas Tube |
Titanium Tubing |
Titanium Oil Tube |
Titanium Pitot Tube |
Encapsulated Coiled Tubing |
Titanium High-Strength Capillary Tubing |
Titanium Bellows Tube |
ASME SB338 Precision Tube |
Transmission Tube |
Titanium Welded Tube |
Titanium Redrawn Tubing |
Titanium Heat Resistant Tubing |
Custom Titanium Tubing |
Seam-Welded Tubing |
Titanium Alloy Cold-Drawn Coiled Tubing |
Titanium Chemical Process Tube |
Titanium Welded Coiled Tubing |
Titanium Straight Tube Heat Exchanger |
Titanium Mechanical Tubing |
Titanium Alloy Thin Wall Tubing |
Small Diameter Titanium Tubing |
Titanium Welded Tubing |
Titanium Tubing Bends |
Titanium Alloy Umbilical Tubing |
Titanium Steel Tubing |
Extreme Environment Gas Tube |
High Pressure Titanium Tubing |
Titanium
Titanium Metal May Be A Exceptionally Solid Metal For Engineering Applications Since This Metal Is Corrosion-Resistant Additionally This Metal Is Exceptionally Solid And Exceptionally Light. It Is 40% Lighter Than Steel But As Solid As High-Strength Steel.
Titanium Compositions (Percentages)
Grade | C | N | O | H | Ti | Fe |
Titanium Grade 1 Tube | .08 Max | .03 Max | .18 Max | .015 Max | Bal | .20 Max |
Titanium Grade 4 Tube | .08 Max | .05 Max | .40 Max | .015 Max | Bal | .50 Max |
Titanium Grade 7 Tube | .08 Max | .03 Max | .25 Max | .015 Max | Bal | .30 Max |
Titanium Grade 9 Tube | .08 Max | .03 Max | .15 Max | .015 Max | - | .25 Max |
Titanium Grade 12 Tube | .08 Max | .03 Max | .25 Max | 0.15 Max | - | .30 Max |
Inconel
Inconel Is A Family Of Austenitic Nickel-Chromium-Based Superalloys.
Inconel Composition
Inconel | Element (% By Mass) | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Ni | Cr | Fe | Mo | Nb | Co | Mn | Cu | Al | Ti | Si | C | S | P | B | |
600 | 72.0 | 14.0–17.0 | 6.0–10.0 | 1.0 | 0.5 | 0.5 | 0.15 | 0.015 | |||||||
617 | 44.2–56.0 | 20.0–24.0 | 3.0 | 8.0–10.0 | 10.0–15.0 | 0.5 | 0.5 | 0.8–1.5 | 0.6 | 0.5 | 0.15 | 0.015 | 0.015 | 0.006 | |
625 | 58.0 | 20.0–23.0 | 5.0 | 8.0–10.0 | 3.15–4.15 | 1.0 | 0.5 | 0.4 | 0.4 | 0.5 | 0.1 | 0.015 | 0.015 | ||
690 | 59.5 | 30 | 9.2 | 0.35 | 0.01 | 0.02 | 0.35 | 0.019 | 0.003 | ||||||
718 | 50.0–55.0 | 17.0–21.0 | Balance | 2.8–3.3 | 4.75–5.5 | 1.0 | 0.35 | 0.2–0.8 | 0.65–1.15 | 0.3 | 0.35 | 0.08 | 0.015 | 0.015 | 0.006 |
X-750 | 70.0 | 14.0–17.0 | 5.0–9.0 | 0.7–1.2 | 1.0 | 1.0 | 0.5 | 0.4–1.0 | 2.25–2.75 | 0.5 | 0.08 | 0.01 |
|
|
Kerala |
Bihar |
Karnataka |
Andhra Pradesh |
Tamil Nadu |
Maharashtra |
Jharkhand |
Uttar Pradesh |
Gujarat |
Noida |
Delhi |
West Bengal |
Iraq |
Qatar |
Oman |
Kuwait |
Saudi Arabia(KSA) |
Bahrain |
United Arab Emirates |
Ready Stock of ASTM B338 Titanium Welded Tubing, stockholder of Titanium Alloy Seamless Tubing in India, Wholesaler of Titanium Tube in Mumbai used for boiler feeders and heat exchangers.
Hot sale of Titanium Alloy Seamless Tubing, stockist of ASME SB338 Titanium Round Tubes, suppliers of ASME SB338 Titanium Electropolish Tubes, dealer of titanium alloy tube Stock