duplex 2205 plate

  • Home
  • duplex 2205 plate suppliers

buy Cut to size 2205 duplex plate suppliers, 2205 duplex stainless steel plate manufacturer in India, SA-240 Duplex 2205 Plate suppliers

Manufacturer of ASTM A240 Type 2205 Duplex Sheet, Duplex Steel S31803 Plates, high quality 2205 Duplex Steel Plates, 2205 Plate Material stockist in Mumbai, India, check Duplex 2205 Sheet Price in India.

The material used in the production of Duplex Steel S31803 Perforated Sheets must also conform to the specified mechanical properties mentioned here as well. Often, the Duplex Steel S31803 Plates could be used as an alternative to the rather expensive stainless steel alloy grade 904L due to the 2205 SS Plate having similar properties but with cheaper ingredients.

duplex 2205 Plate
duplex 2205 Plate
ASTM A240 Type 2205 Duplex Sheet
ASTM A240 Type 2205 Duplex Sheet
2205 duplex stainless steel plate
2205 duplex stainless steel plate

 

Table Of Content

Check ASTM A240 Gr 2205 Strip Price List, high quality Alloy 2205 Coil supplier, Duplex Steel S32205 Foil and Saf 2205 Plate importer in India, No. 1 Finish Duplex 2205 Sheet manufacturers, Duplex 2205 Plate suppliers.

Duplex plate has a two or dual phase micro structure. The microstructure of the Duplex Steel S32205 Foil consists of ferrite and austenitic in an equal proportion. This stainless steel if often recommended by duplex 2205 plate suppliers in Mumbai because it offers a combination of attractive properties such as its high tensile strength along with its excellent corrosion resistance properties. The ASTM A240 Type 2205 Duplex Sheet, when supplied in an annealed condition offers a maximum Brinell hardness value of about 290 .

As noted by many SA-240 Duplex 2205 Plate suppliers, the alloy has been characterised by high yield strength, which tends to be almost two times that of any standard austenitic stainless steel grades. Further the superior properties of the Thick 2205 SS Sheet includes good fatigue strength plus excellent resistance to chlorine related stress corrosion cracking, crevice corrosion, pitting, erosion corrosion as well as general corrosion even in severe environments. Again in terms of these properties, the 2205 Plate Material Stockist tends to normally outperform the standard or conventional austenitic stainless steel grades.

Although the 2205 duplex stainless steel plate cannot be hardened by thermal treatment, but its strength and hardness can substantially be increased by a cold working process, with a subsequent reduction in its ductile properties.Therefore the duplex 2205 plate suppliers recommend using the alloy extensively in the fields -  Marine, Pulp and Paper, Oil and Gas, Chemical, Petrochemical, Transport and allied processing industries.

 

What is duplex 2205 Plate?

The ASTM A240 is a specification standard which covers several chromium based stainless steel grades which have been manufactured in the form of either plates, sheets, or ASTM A240 Gr 2205 Strip. The  ASTM A240 Gr 2205 Strip is meant for applications that involve being used in either for general applications or in pressure vessels. The steel ASTM A240 Type 2205 Coils needs to conform to the requirements of the chemical composition as mentioned in the ASTM A240 specification.

 

Specification of 2205 duplex stainless steel plate

Standard Industry Specifications
  • ASME SA 240
  • ASTM A 240 
  • UNS S32205
  • W.NR. 1.4462
  • GE-S400/ S1000
  • PWA-LCS
  • EN 10028-7
  • RR SABRe Edition 2
  • DFARS Compliant
Material Duplex 2205 Sheet & Duplex 2205 Plate
Specification ASTM A240 / ASME SA240
Standard Sizes 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm
Tolerances of Width and thickness
  • EN 10151 Duplex 2205 strip for springs
  • EN 10088 Duplex 2205 strip (general)
  • EN 10258 (formerly DIN 59381)
Width 10-2500mm
SA-240 Duplex 2205 Plate & Sheet Thickness 0.1mm to 100 mm Thk
SA 240 Type 2205 Plate & Sheet Length 2m, 2.44m, 3m, or as required
SA 240 GR 2205 Plate & Sheet Finish 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated), Cold rolled sheet (CR), Hot rolled plate (HR), No.1 finish hot rolled 2205 Duplex Plate, 2B, 1D, BA, No.4, 8K, hairline, satin, brush, mirror etc.
SA 240 TP 2205 Plate & Sheet Hardness Quarter Hard, Half Hard,Spring Hard, Soft, Hard, Duplex 2205 Sheet suppliers
Stock available in form of Shim Sheet, Rolls, Strip, Flats, Clad Plate, Plain Sheet, Plate, Sheet, Coils, Foils, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Blank (Circle), soft annealed, sheared, annealed, tread plate,descaled, Checker Plate
Profiling

To provide a full profiling service in India we use numerous profiling methods including:

  • Plasma Plate Cutting
  • Laser Plate Cutting
  • Oxy-propane Flame Cutting
Avesta 2205 Plate & Sheet Manufacturers Sail, Jindal, Shah Alloys, Outokumpu, BAOSTEEL, TISCO, JISCO, LISCO, POSCO, ZPSS
Plasma profiles As per customer's drawings
Value added services for Duplex 2205 Sheet & Plate Plasma cutting, Waterjet cutting, Bending and mechanical processing, Laser cutting, welding, edge preparation, sawing and shearing.
Value added services for Duplex 2205 Coil
  • Slitting
  • Cut-to-length
  • Blanking 
  • Polishing
Why choose Metal tube?
  • The third party inspection is accepted.
  • Mill Test Certificate is supplied with shipment.
  • Free sample is available. (Yes, we could offer the sample for free charge but do not pay the cost of freight.)
  • Minimum Nitrogen content and Ferrite Count Test
  • Tested to ASTM A923 Method "C" or ASTM G48 Method "A".
Specialized in
  • ASTM A240 Type Duplex 2205 Clad plate: ASTM A240 Type Duplex 2205 Clad plate is a composite steel plate made by bonding ASTM A240 Type Duplex 2205 plate, etc.
  • ASTM A240 Type Duplex 2205 Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width;
  • ASTM A240 Type Duplex 2205 Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width.
  • ASTM A240 Type Duplex 2205 Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width;
Delivery time Generally it is 7-10 days if the Duplex 2205 Sheet & Plate are in stock. or it is 15-20 days if the Duplex 2205 Plate & Sheet are not in stock, it depends to quantity.


2205 duplex plate Price in India

Price list of duplex 2205 Plate in India UNS S32205 duplex 2205 Plate Price in India (INR) Saf 2205 Plate Price in UK Pound sterling Duplex Steel S32205 Plate Price in UAE Dirham
Duplex 2205 Plate price per kg in India INR 300-350 / Kg 4-5 /Kg UK Pound sterling AED 16-19 UAE Dirham
Duplex 2205 Sheet price per kg in India INR 300-400 / Kg USD $ 4-6 /Kg AED 16-21 UAE Dirham

This is an approximate Cost of Saf 2205 Sheet in India. For factory price buy directly from duplex 2205 Plate manufacturers in India, check latest ASTM A240 Type 2205 Plate price list & stock sizes please mail us.

 

Types of duplex 2205 Plate

Saf 2205 Plate
Saf 2205 Plate
ASTM A240 Type 2205 Sheet
ASTM A240 Type 2205 Sheet
UNS S32205 duplex 2205 Foil
UNS S32205 duplex 2205 Foil
Duplex Steel S32205 Coil
Duplex Steel S32205 Coil
ASTM A240 Type 2205 Precision Strip
ASTM A240 Type 2205 Precision Strip
Duplex Steel S32205 Strip Tape
Duplex Steel S32205 Strip Tape
Saf 2205 Shim Sheet
Saf 2205 Shim Sheet
ASTM A240 Type 2205 Perforated Sheet
ASTM A240 Type 2205 Perforated Sheet
UNS S32205 duplex 2205 Chequered Plate
UNS S32205 duplex 2205 Chequered Plate
Duplex Steel S31803 Nickel Clad Plate
Duplex Steel S31803 Nickel Clad Plate
Duplex Steel S32205 Shim Stock
Duplex Steel S32205 Shim Stock
duplex 2205 Superalloy Mesh Plate
duplex 2205 Superalloy Mesh Plate
1.4462 duplex 2205 Hot Rolled Plate
1.4462 duplex 2205 Hot Rolled Plate
duplex 2205 Din 1.4462 Cold Rolled Sheet
duplex 2205 Din 1.4462 Cold Rolled Sheet
Alloy 2205 Checker Plate
Alloy 2205 Checker Plate
SA-240 Duplex 2205 Cold Rolled Plate
SA-240 Duplex 2205 Cold Rolled Plate
duplex 2205 Rolling Plate
duplex 2205 Rolling Plate
Duplex Steel S32205 Polished Plate
Duplex Steel S32205 Polished Plate
Saf 2205 Quarto Plate
Saf 2205 Quarto Plate
ASTM A240 Type 2205 Flat Sheet
ASTM A240 Type 2205 Flat Sheet

 

ASTM A240 Type 2205 Plate melting range

ASTM A240 Type 2205 Plate melting range
2525-2630°F

 

Specific Heat Capacity at 212°F

0.119 Btu/lb/°F

Thermal Conductivity at 212°F

8.4 Btu/hr-ft-°F

Poisson’s Ratio

0.3

Elastic Modulus at 72°F

29 x 10 psi

 

UNS S32205 duplex 2205 Plate density

UNS S32205 duplex 2205 Plate density
0.278 lb/in3   

 

Weight per Unit of Duplex Steel S31803 Plate

Saf 2205 Sheet Weight & Density

Thickness Plate Weight per Unit Area Density
3/16 inches 0.06000 lbs/in²42.184176 kg/m² 0.315 lbs/in³8.72 g/cm³
1/4 inches 0.08 lbs/in²56.245568 kg/m² 0.315 lbs/in³8.72 g/cm³
3/8 inches 0.121 lbs/in²85.0714216 kg/m² 0.315 lbs/in³8.72 g/cm³
1/2 inches 0.161 lbs/in²113.1942056 kg/m² 0.315 lbs/in³8.72 g/cm³
5/8 inches 0.196 lbs/in²137.8016416 kg/m² 0.315 lbs/in³8.72 g/cm³
3/4 inches 0.235 lbs/in²165.221356 kg/m² 0.315 lbs/in³8.72 g/cm³
7/8 inches 0.274 lbs/in²192.6410704 kg/m² 0.315 lbs/in³8.72 g/cm³
1 inches 0.313 lbs/in²220.0607848 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/4 inches 0.391 lbs/in²274.9002136 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/2 inches 0.47 lbs/in²330.442712 kg/m² 0.315 lbs/in³8.72 g/cm³
1 3/4 inches 0.549 lbs/in²385.9852104 kg/m² 0.315 lbs/in³8.72 g/cm³
2 inches 0.627 lbs/in²440.8246392 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/4 inches 0.705 lbs/in²495.664068 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/2 inches 0.784 lbs/in²551.2065664 kg/m² 0.315 lbs/in³8.72 g/cm³
2 3/4 inches 0.862 lbs/in²606.0459952 kg/m² 0.315 lbs/in³8.72 g/cm³
3 inches 0.941 lbs/in²661.5884936 kg/m² 0.315 lbs/in³8.72 g/cm³

 

Duplex 2205 Plate Thickness

We offer 2205 duplex stainless steel plate inventory in thicknesses from 3/16" (4.8mm) through 6" (152.4mm).

 

Size chart of Saf 2205 Plate

Stocked Sizes
Size (in inches)
Size (in mm)
.125"
3.18mm
.134"
3.40mm
.156"
3.96mm
.187"
4.75mm
.250"
6.35mm
.312"
7.92mm
.375"
9.53mm
.500"
12.7mm
.625"
15.9mm
.750"
19.1mm
.875"
22.2mm
1"
25.4mm
1.125"
28.6mm
1.250"
31.8mm
1.500"
38.1mm
1.750"
44.5mm
2"
50.8mm
2.500"
63.5mm
3"
76.2mm

 

Alloy 2205 Plate Welding

Duplex 2205 Plate grades have good weldability and suitable to welded using other common welding methods such as :

  • Gas metal arc welding MIG (GMAW)
  • Shielded metal arc welding (SMAW)
  • Resistance welding
  • Laser welding
  • Submerged arc welding (SAW)
  • Gas tungsten arc welding TIG (GTAW)
  • Plasma arc welding (PAW)
  • Flux-cored arc welding (FCW)
  • High-frequence welding
Type Typical Base Metal Composition Grade UNS No. GMAW / SAW / GTAW
Autrod / Tigrod
FCAW
Duplex 23Cr, 4Ni, 0.10N

(SAF) 2304, UR35N

S32304/ 1.4362

ER2209

SB 2209
Duplex 22Cr, 5.5Ni, 3Mo, 0.15N

(SAF) 2205, UR45N

S31803 /1.4462 S32205

ER2209

SB 2209
Duplex 25Cr, 7Ni, 3Mo, 0.14N DP3 S31260

ER2509

SB 2509
Super Duplex 25Cr, 6.5Ni, 3Mo, 0.18N UR47N S31200

ER2509

SB 2509
Super Duplex 25Cr, 6Ni, 3Mo, 2Cu, 0.20N Ferralium 255
UR52N+
S32550

ER2509

SB 2509*
Super Duplex 25Cr, 6Ni, 3Mo, 0.7Cu, 0.7W, 0.25N Zeron 100 S32760

ER2509

SB 2509*
Super Duplex 25Cr, 7Ni, 4Mo, 0.25N (SAF) 2507 S32750

ER2509

SB 2509

 

Duplex 2205 Sheet & Plate for sale

2205 SS Sheet 2205 SS Coil
2205 SS Checker Plate 2205 Duplex Quarto Plate
2205 Duplex Stainless Steel Plate 2205 Stainless Steel Coil
2205 SS Coils 2205 Duplex Stainless Steel Coil
2205 SS Hot rolled plate SA 240 Type 2205 Rolling Sheet
2205 Duplex Foil 2205 Duplex 2B Sheet
Saf 2205 Clad Plate Saf 2205 Flat Sheet
Polished 2205 Duplex Plate 2205 Duplex Stainless Steel Checker Plate
Saf 2205 cold rolled sheet 2205 Duplex Hot Rolled Coil, Strip And Plate
2205 Duplex Corrugated Sheet SA 240 TP 2205 Expanded Sheet
2205 Duplex Rolls Sheet 2205 Duplex Foil Rolls
2205 Stainless Steel Chequered Plate Saf 2205 Clad Plate
Cold Rolled 2205 Stainless Steel Sheet 2205 SS Checker Plate
2205 Stainless Steel Shim Sheet SA 240 Type 2205 Sheet
2205 Duplex Stainless Steel Sheet SA 240 TP 2205 Rolling Sheet
2205 Duplex Checker Plate 2205 Duplex Coil Slitting
Saf 2205 Chequer Plate 2205 SS Plate
2205 Duplex Stainless Steel B. Q. Profile 2205 Duplex Coil
2205 Duplex Steel Chequered Plate 2205 Duplex Steel Strips
2205 Duplex Steel Coil ASTM A240 Type 2205 Coil
Alloy 2205 Sheet 2205 Duplex Clad Plate
2205 Duplex Plate 2205 SS Rolling Sheet
2205 Duplex Flat Strip SA 240 TP 2205 Bbq Plate
ASTM A240 Type 2205 Strips Saf 2205 Strips
2205 Duplex Etching Sheet 2205 Duplex Floor Sheet
2205 Duplex Coil 2205 SS Strips
Decorative Alloy 2205 Sheet Mirror Finish 2205 Duplex Sheet
Avesta 2205 Sheet Avesta 2205 Diamond Plate
2205 Stainless Steel Perforated Plate 2205 SS Chequered Plate
2205 SS Rolling Plate 2205 SS Precision Strip
Saf 2205 Rolling Plate Saf 2205 Precision Strip
2205 Stainless Steel Strips 2205 Duplex Steel Strips
Saf 2205 Rolling Sheet SA-240 Duplex 2205 SS Rolling Sheet
2205 Duplex Steel Rolling Sheet SA 240 GR 2205 Rolling Sheet
ASTM A240 Type 2205 Strips 2205 Duplex Strips
2205 SS Rolling Sheet 2205 SS Rolling Sheet
2205 SS Sheet SA 240 TP 2205 Duplex Sheet
2205 Duplex Rolling Sheet 2205 SS Chequered Plate
2205 Duplex Mirror Sheet 2205 Duplex Patterned Sheet
2205 SS Hot rolled plate 2205 SS Hot rolled plate
2205 Duplex Shim Stock 2205 Duplex Flat Shim
Chequer Plate ASTM A240 Gr 2205 2205 Duplex Steel Sheet
ASTM A240 Type 2205 Sheet ASTM A240 Gr 2205 Sheet
ASTM A240 Gr 2205 Hot rolled plate 2205 SS Perforated Sheet
Embossed 2205 Duplex Sheet Thin 2205 Duplex Sheet
2205 Stainless Steel Hot rolled plate Hot rolled plate SA-240 Duplex 2205
2205 Duplex Steel Hot rolled plate ASTM A240 Type 2205 Hot rolled plate
Avesta 2205 Hairline Sheet No.4 2205 Duplex Sheet
Perforated Sheet SA-240 Duplex 2205 2205 Duplex Steel Perforated Sheet
Alloy 2205 Plate 2205 Duplex Plate
2205 SS Perforated Sheet 2205 Stainless Steel Perforated Sheet
2205 Duplex Checker Plate ASTM A240 Type 2205 Perforated Sheet
Clad Plates SA-240 Duplex 2205 2205 Stainless Steel Clad Plate
2205 Duplex Steel Clad Plate ASTM A240 Type 2205 Clad Plate
2205 Duplex Shims ASTM A240 Gr 2205 Perforated Sheet
2205 Duplex Stainless Steel Plate Avesta 2205 Plate
2205 SS Clad Plate 2205 SS Clad Plate
Plate SA-240 Duplex 2205 2205 Duplex Steel Plate
2205 Stainless Steel Plate 2205 Duplex Steel Plate
ASTM A240 Gr 2205 Clad Plate 2205 SS Plate
2205 Duplex Design Sheet Alloy 2205 Shim Stock
2205 SS Plate Saf 2205 Flat Sheet

 

Dimensions of duplex 2205 Plate

ASTM A240 Type 2205 Plate Imperial Dimensions

Surface finish

Thickness (in)

Width (in)

1 – Duplex 2205 Hot rolled, heat treated, pickled Plate & Sheet

.1000 – .3750

max. 72

2R – Duplex 2205 Cold-rolled, bright-annealed Sheet & Plate

 0.002–0.06

 0.118–25.551

2H – Duplex 2205 Work hardened Plate & Sheet

 0.002–0.06

 0.118–24.803

2B – Duplex 2205 Cold rolled, heat treated, pickled, skin passed Sheet & Plate

10–24

max. 72*

2D – Duplex 2205 Cold rolled, heat treated, pickled Plate & Sheet

12–24

max. 60

BA Mexinox only

18–28

max. 48

Deco Rolled-On Mexinox only

14–28

max. 48

Duplex 2205 Polished Plate & Sheet (not brushed)

11–24

max. 60

Temper rolled Mexinox only

13–29

max. 48

ASTM A240 Alloy 2205 Plate Metric Dimensions

Surface finish

Thickness (mm)

Width (mm)

Duplex 2205 1D – Hot rolled, heat treated, pickled Plate & Sheet

2.4–12.7

max. 2032

2R – Duplex 2205 Cold-rolled, bright-annealed Sheet & Plate

0.05–1.50

3–649

2H – Duplex 2205 Work hardened Plate & Sheet

0.05–1.50

3–630

2B – Duplex 2205 Cold rolled, heat treated, pickled, skin passed Sheet & Plate

0.25–8.0

max. 2032

2D – Duplex 2205 Cold rolled, heat treated, pickled Plate & Sheet

0.4–6.35

max. 1524

2E – Duplex 2205 Cold rolled, heat treated, mechanically descaled Sheet & Plate

0.4–8.0

max. 2032

2R – Duplex 2205 Cold rolled, bright annealed Plate & Sheet

0.25–3.5

max. 1524

2H – Duplex 2205 Work hardened Sheet & Plate

0.4–6.35

max. 1524

Duplex 2205 Polished, brushed Plate & Sheet

0.5–4.0

max. 1524

Deco

0.3–3.5

max. 1524

Duplex 2205 Coil

0.30–3.5

max. 1,524

 

Ready Stock of Duplex Steel S32205 Plate

we stock following Types of duplex 2205 Plate:

Duplex 2205 Stainless Steel Strips 2205 Duplex 1.4462 Flat
Duplex 2205 Alloy Sheet Duplex 2205 Werkstoff 1.4462 Sheet
Duplex 2205 Sheet Inox Duplex 2205 Coil
Duplex SS 2205 Coil Duplex 2205 Grade F51 Sheet
Avesta 2205 Plate Lean Duplex 2205 Flat
Duplex 2205 Steel Flat Duplex Type 2205 Plate
2205 Duplex Flat Duplex 2205 F60 Plate
2205 Duplex Stainless Steel Coil 22Cr Duplex Stainless Steel Plate
2205 Duplex SS Sheet 22Cr Duplex Steel Sheet
Alloy 2205 Plate 22Cr Duplex Stainless Flat
2205 Duplex Steel Sheet 1.4462 Duplex 2205 Coil
2205 Stainless Steel Plate 1.4462 saf 2205 Sheet
22 Cr Super Duplex Coil Duplex 2205 F51 Plate
22cr Duplex Sheet Duplex 2205 Grade Sheet
Duplex Stainless Steel 2205 Coil Duplex Stainless Steel 22 cr Sheet
22 Cr Duplex Steel Sheet Saf 2205 Duplex Stainless Steel Strips
Duplex 2205 Alloy Sheet SA 240 Type 2205 Strips
Duplex 2205 AISI Plate Duplex Stainless Steel Grade 2205 Coil

 

Equivalent Grades of duplex 2205 Plate

STANDARD
WERKSTOFF NR.
UNS
Duplex 2205 Plate
1.4462 / 1.4462

UNS S31803 / UNS S32205

 

UNS S32205 duplex 2205 Plate Properties

Chemical Composition of ASTM A240 Type 2205 Plate

Element
Percent By Weight
Cr
Chromium
22.0 - 23.0%
Ni
Nickel
4.5 - 6.5%
Mn
Manganese
2.0% max
Si
Silicon
1.0% max
P
Phosphorous
0.03% max
S
Sulfur
0.02% max
C
Carbon
0.03% max
N
Nitrogen
0.1 - 0.2%
Mo
Molybdenum
3.0 - 3.5%
Fe
Iron
Balance

 

ASTM A240 Type 2205 Plate Mechanical Properties

Mechanical property
Value

0.2% Yield Strength, ksi

65 min

Tensile Strength, ksi

90 min

Elongation, %

25 min

Hardness [HRC]

293 max

 

ASTM A240 Type 2205 Specified Tensile Properties

Ultimate Tensile Strength, ksi Minimum
.2% Yield Strength, ksi Minimum
Hardness Max.
95
65
31 Rockwell C

 

Difference Between Inconel and Duplex

Duplex

Duplex stainless steels are called “duplex” since they have a two-phase microstructure comprising of grains of ferritic and austenitic stainless steel.

Duplex Compositions (percentages)


Grade

 

C

Mn

Si

P

S

Cr

Mo

Ni

N

2205 (S31803)

Min

Max

-

0.030

-

2.00

-

1.00

-

0.030

-

0.020

21.0

23.0

2.5

3.5

4.5

6.5

0.08

0.20

2205 (S32205)

Min

Max

-

0.030

-

2.00

-

1.00

-

0.030

-

0.020

22.0

23.0

3.0

3.5

4.5

6.5

0.14

0.20

 

Inconel

Inconel is a family of austenitic nickel-chromium-based superalloys.

Inconel Composition

Inconel Element (% by mass)
Ni Cr Fe Mo Nb Co Mn Cu Al Ti Si C S P B
600 72.0 14.0–17.0 6.0–10.0 1.0 0.5 0.5 0.15 0.015
617 44.2–56.0 20.0–24.0 3.0 8.0–10.0 10.0–15.0 0.5 0.5 0.8–1.5 0.6 0.5 0.15 0.015 0.015 0.006
625 58.0 20.0–23.0 5.0 8.0–10.0 3.15–4.15 1.0 0.5 0.4 0.4 0.5 0.1 0.015 0.015
690 59.5 30 9.2 0.35 0.01 0.02 0.35 0.019 0.003
718 50.0–55.0 17.0–21.0 balance 2.8–3.3 4.75–5.5 1.0 0.35 0.2–0.8 0.65–1.15 0.3 0.35 0.08 0.015 0.015 0.006
X-750 70.0 14.0–17.0 5.0–9.0 0.7–1.2 1.0 1.0 0.5 0.4–1.0 2.25–2.75 0.5 0.08 0.01

 

duplex 2205 plate uses

  • Flue gas desulfurization equipment
  • Pulp mill digesters, bleach washers, chip pre-steaming vessels  
  • Chemical process vessels, piping and heat exchangers
  • Food processing equipment
  • Oil field piping and heat exchangers

 

Difference between duplex 2205 Plate, Sheet, & Foil

  • Thickness greater than 6.35 mm is called a duplex 2205 Plate.
  • Thickness greater than 0.15 mm and less than 6.35mm is called a duplex 2205 Sheet.
  • Thickness less than 0.15mm is called a duplex 2205 Foil.

 

Call our representatives of duplex 2205 plate  in following States

Andhra Pradesh
Bihar
Uttar Pradesh 
Maharashtra
Gujarat
Noida
West Bengal
Delhi
Karnataka
Kerala
Tamil Nadu
Jharkhand

 

Get our sales contact for ASTM A240 Type 2205 Duplex Sheet in following countries

Iraq
Saudi Arabia(KSA)
United Arab Emirates
Oman
Kuwait
Qatar
Bahrain

 

Check 2205 Duplex Stainless Steel Plate Price in India, ASTM A240 Type 2205 Coils wholesaler in Mumbai. mirror finish Saf 2205 Shim Sheet suppliers in India. Thick 2205 SS Sheet stockholder, 2205 SS Plate manufacturers.
2B/ BA/ HL/ NO.1 SA 240 Type 2205 Coil stockist, 5mm Thick Cold Rolled 2205 Duplex Stainless Steel Plate traders, importer of mill finished 2205 Stainless Steel Sheet , Hot rolled Saf 2205 Plate distributors