Monel 400 Plate Instant Details
Rolled nickel-copper plate, sheet and strip, held in Mumbai stock since 1980.
Ask Free Sample from Nickel Alloy 400 Sheet & Strip Supplier in India At Low Price
Metal Tube Industries stocks Monel 400 plate, sheet and strip, ASTM B127. We stock plate from 3/16 to 3 inch and cold-rolled sheet 0.5 to 6.4 mm. We keep 1220x2440 mm and 1500x3000 mm formats ready to cut. Our annealed material ships with an EN 10204 3.1 certificate listing heat chemistry. We shear, saw, plasma, laser or waterjet cut, and we slit coil. We pack in waterproof bundles or plywood boxes for export. Our marine, chemical, refinery and heat-exchanger buyers receive written rates on request. Buyers send us thickness and quantity lists, and we quote in writing. Metal Tube Industries has been trading from Mumbai since 1980. We load at Nhava Sheva port and arrange third-party inspection on request.
Table Of Content
Most reliable supplier of UNS N04400 Monel 400 Foil, Stockist of Monel N04400 Plate, Alloy Monel 400 Coil in Mumbai, India. check Grade Monel 400 Clad Plate Price in India, Manufacturer of 2.4360 Alloy 400 Sheet
Monel 400 Plate Specification
Our Monel 400 Plate Supplier in Mumbai desk quotes annealed ASTM B127 plate, sheet and strip from stock.
Monel 400 Plate Density
- 8.80 g/cm³
- 0.318 lb/in³
- Basis for every weight figure on this page
UNS N04400 Plate Melting Range
- 1300 to 1350 °C
- 2370 to 2460 °F
- Single-phase nickel-copper solid solution
Alloy 400 Sheet Surface Finish
- Hot-rolled plate, descaled
- Cold-rolled sheet, annealed
- Polished or brushed on request
- Finish stated on the order
Nickel Alloy 400 Sheet Cutting Services
- Shearing and sawing
- Plasma and laser cutting
- Waterjet cutting
- Blanks and circles to drawing
WNR 2.4360 Polish Plate Processing
- Slitting to width
- Cut-to-length
- Blanking
- Polishing
ASTM B127 Monel 400 Sheet Mill Origin
- European origin
- Indian origin
- Japanese origin
- Origin named in the quote
AMS 4544 Strip Testing
- UT on plate
- PMI material check
- Spectro chemistry check
- Test scope agreed at order
Phyweld 400 Clad Plate Packing
- Waterproof-cloth bundles
- Plywood box for sea freight
- Fumigation certificate for wood
- Packing list with each lot
BS 3072NA1 Sheet Customs Code
- HS 7506.20: nickel alloy plate, sheet, strip
- First six digits are common worldwide
- Confirm the local tariff line with your broker
Monel 400 Plate Manufacturer in India, Serving Buyers Since 1980
Tell us the thickness, width and quantity; a written rate follows quickly.
Request Quote Now
A full range of Monel Alloy 400 Plate, manufacturers of Monel 400 ASTM B127 Hot Rolled Plate, supplier of Monel ASTM B127 Strip Tape, importer of Alloy 400 Monel 2.4360 Slitting Coil in India, Check Monel 400 Alloy Polished Plate Price List
Types of Monel 400 Plate
Monel 400 Plate Stockist in Ahmedabad buyers choose hot-rolled plate, cold-rolled sheet, strip or coil from Mumbai stock.
Hot rolled
Monel 400 ASTM B127 Hot Rolled Plate
- Thickness3/16 in and over
- Tensile485 MPa min
Sheet
Alloy 400 Cold Rolled Sheet
- Thickness0.46 to 6.4 mm
- Yield195 MPa min
Strip
ASTM B127 Alloy 400 Precision Strip
- Thickness0.13 to 6.4 mm
- Tensile485 to 585 MPa
Coil
Alloy Monel 400 Slitting Coil
- ServiceSlitting, blanking
- CutCut-to-length
Shim
400 Monel Shim Sheet
- FormFlat shim stock
- SizeMade to order
Chequered
UNS N04400 Chequered Plate
- SurfaceRaised tread pattern
- SizeMade to order
Polished
Monel 400 Alloy Polished Plate
- FinishPolished or brushed
- GritAgreed at order
Clad
Grade Monel 400 Clad Plate
- BuildMonel layer on a base plate
- BasisPer your drawing
UNS N04400 Plate Chemical Composition (%)
Monel 400 Plate Supplier in Bengaluru orders carry heat-wise chemistry on the EN 10204 3.1 MTC.
Mechanical Properties of ASTM B127 Monel 400 Plate
ASTM B127 Monel 400 Plate Supplier in Chennai enquiries receive annealed strength values with the quote.
Hot-rolled plate and sheet, annealed
Cold-rolled sheet and strip, annealed
Typical annealed values (reference)
Nickel Alloy 400 Plate Material Equivalent
Alloy 400 Strip Mill Brands and Origin
Our Monel 400 Plate Supplier desk supplies plate from these two approved mills in Germany and Japan.
VDM Metals
Germany
Materials
Supplies
Nippon Yakin
Japan
Materials
Supplies
WNR 2.4360 Plate Theoretical Weight by Thickness
Monel 400 Plate Supplier in Pune desks quote by thickness, sheet size and theoretical weight.
kg/m² = thickness (mm) × 8.80Sheet weight = kg/m² × area in m². Actual weight varies within rolling tolerance.
Nickel Alloy 400 Sheet Size Chart (Inch to mm)
Buyers of Monel 400 Plate convert inch gauge to millimetre thickness before sending an enquiry.
Common plate and sheet thicknesses
Monel 400 Plate Weight Chart
This Monel 400 Plate weight chart gives theoretical weight for every inch size in the chart above.
| Thickness (in) | Thickness (mm) | Weight (kg/m²) | Weight (lb/ft²) | kg per 1500 × 3000 mm plate |
|---|---|---|---|---|
| 1/8 in | 3.18 | 27.9 | 5.72 | 126 |
| 0.134 in | 3.40 | 30.0 | 6.13 | 135 |
| 5/32 in | 3.96 | 34.9 | 7.14 | 157 |
| 3/16 in | 4.75 | 41.8 | 8.56 | 188 |
| 1/4 in | 6.35 | 55.9 | 11.45 | 251 |
| 5/16 in | 7.92 | 69.7 | 14.28 | 314 |
| 3/8 in | 9.52 | 83.8 | 17.17 | 377 |
| 1/2 in | 12.70 | 111.8 | 22.89 | 503 |
| 5/8 in | 15.88 | 139.7 | 28.61 | 629 |
| 3/4 in | 19.05 | 167.6 | 34.34 | 754 |
| 7/8 in | 22.22 | 195.6 | 40.06 | 880 |
| 1 in | 25.40 | 223.5 | 45.78 | 1006 |
| 1 1/8 in | 28.57 | 251.5 | 51.50 | 1132 |
| 1 1/4 in | 31.75 | 279.4 | 57.23 | 1257 |
| 1 1/2 in | 38.10 | 335.3 | 68.67 | 1509 |
| 1 3/4 in | 44.45 | 391.2 | 80.12 | 1760 |
| 2 in | 50.80 | 447.0 | 91.56 | 2012 |
| 2 1/2 in | 63.50 | 558.8 | 114.45 | 2515 |
| 3 in | 76.20 | 670.6 | 137.34 | 3018 |
ASTM B127 Monel 400 Sheet Surface Finish
Monel 400 Plate are supplied in these five finishes.
Sandblasted
Suits Anti-glare, coating key
Matte
Suits Standard fabrication
Brushed
Suits Satin look, handling wear
Glossy
Suits Easy-clean equipment
Mirror
Suits Low-fouling surfaces
Alloy 400 Sheet Seawater Service Limits
Our Monel 400 Plate stock serves coastal and offshore buyers who need to know where the alloy holds and where it does not.
Flowing seawater
Holds up in fast-moving seawater that erodes many other metals.
Stagnant seawater
Pitting and crevice attack can start where water sits still, so plan flow and joint details with care.
Fresh and industrial water
Resists pitting and stress corrosion cracking in most fresh and industrial waters.
Ozonated seawater
A published lab study found good results in aerated and chlorinated seawater, but crevice attack in ozonated seawater.
Monel 400 Plate Hydrofluoric Acid and Chemical Duty
Refinery and chemical buyers ask for Alloy Monel 400 Plate when hydrofluoric acid is in the process.
Hydrofluoric acid
Alkylation units
Reducing acids
Vapour-phase caution
Nickel Alloy 400 Sheet Exporter in India for Durban, South Africa
Name the destination port and tonnage, and we price the full sea-freight leg.
Request Export Quote
Welding and Fabrication of Monel 400 Plate
Plate from our Mumbai stock is ready for shop fabrication once you confirm the filler and procedure.
GTAW and GMAW Filler
01Use ERNiCu-7 wire (AWS A5.14) to join Monel 400 plate by TIG or MIG.
Stick Welding
02Use ENiCu-7 electrodes (AWS A5.11) for manual metal arc welding.
Heat Treatment
03Preheat and post-weld heat treatment are not required for Monel 400.
Cold Work
04Monel 400 gains strength by cold work only, and it cannot be age hardened.
Alloy 400 Plate Welding Procedure
Fabricators use this outline to draft a Monel 400 Plate WPS before qualification welds.
Clean
Fit-up
Weld
Control
Finish
Physical Properties of Monel Alloy 400 Plate
Design engineers check these values before choosing Alloy 400 Sheet for heat-transfer duty.
Temperature Limits & Heat Treatment for Monel Grade 400 Shim Sheet
UNS N04400 Plate keeps toughness at sub-zero temperature and works in moderate heat.
Service ceiling
Commonly used up to about 540 °C in oxidising conditions; confirm for your atmosphere.
Sub-zero duty
Stays ductile at low temperature, with no ductile-to-brittle drop like carbon steel.
Annealing
Typically annealed in the 815 to 980 °C range, then cooled; set the exact cycle with your heat-treater.
Stress relief
Heavily cold-formed parts for aerated HF vapour are usually stress relieved to avoid cracking.
Nickel Alloy 400 Strip Cleaning & Handling Before Heating
Sulphur Contamination
01Low-Melting Metals
02Machining
03Storage
04
Monel 400 Plate vs Monel K500
Buyers often ask which grade suits Alloy 400 Sheet orders and when to move up.
Monel 400
- Strengthened by cold work only
- Easy to weld, no post-weld ageing needed
- Lower cost, wide plate and sheet availability
- Standard choice for seawater and HF duty
Monel K500
- Age hardenable, with added aluminium and titanium
- Much higher strength after ageing
- Used for shafts, fasteners and pump parts
- Costlier, and less common in wide plate
Incoming Inspection Checklist for Monel 400 Foil
Check these points at your dock to confirm the lot matches the EN 10204 3.1 MTC.
Heat number match
Heat number stamped on the plate must match the certificate.
Dimensions
Measure thickness at several points, plus width, length and flatness against the order.
Surface condition
Look for scratches, pits, rolled-in scale or edge cracks before accepting.
PMI check
A handheld analyser confirms Ni and Cu levels fall inside the ASTM B127 range.
Packing and marking
Bundles should be dry and intact, with grade, size and heat number on the tag.
One of the top 2.4360 Monel Sheet, Alloy 400 Monel 4mm Thick Plate suppliers, wholesaler of Monel 400 Steel Flat Plate in Mumbai, manufacturers of Monel Grade 400 Shim Sheet, stockholder of Monel 2.4360 Polish Plate in India use for boiler feeders and heat exchangers
Applications for Monel 400 Plate
Monel 400 Plate leaves our Mumbai stock for marine, chemical, refinery and heat-transfer projects.
Marine Engineering
Plate for equipment that sits in or beside seawater.
Seawater dutyChemical Processing
Vessels, linings and process equipment in corrosive media.
Process plantHydrocarbon Processing
Refinery and alkylation unit equipment.
HF alkylationHeat Exchangers
Plate for heat exchanger and boiler feeder components.
Heat transferValves and Pumps
Valve and pump components that see seawater or corrosive service.
Flow controlTanks and Linings
Fresh-water and gasoline tank plate, and chimney linings.
Storage
ASTM B127 UNS N04400 Plate Supplier in Dubai, UAE, with EN 10204 3.1 Test Reports
Ask for stock plates that arrive with heat-wise certificates matched to each marked sheet.
Get Supplier Quote
Export Papers for Alloy 400 2D Plate
As a Monel 400 Plate Exporter, we send every lot with the paper set your customs agent expects.
MTC 3.1
Heat-wise chemistry and test results, issued to EN 10204 3.1.
MTC 3.2
Witnessed by your nominated inspector or an agency, on request.
Shipping set
Commercial invoice, packing list and a fumigation certificate for wooden packing.
Customs heading
HS 7506.20 covers nickel alloy plate, sheet and strip; confirm the local tariff line with your broker.
Order Monel UNS 4400 Sheet custom sizes online , dealer of Monel 4400 Sheet, Monel 400 Grade Cold Rolled Plate traders of Monel 400 Nickel Polished Cold Drawn Plate, stockist of Monel 400 UNS N04400 Plate
Monel 400 Plate Delivery Estimate
Ex-Stock Dispatch
Plate and sheet from Mumbai stock are cut, packed and released 2-5 days after your confirmed order.
Sea Freight
Bundles or plywood boxes load at Nhava Sheva for Jebel Ali, Durban, Mombasa and Vancouver.
Air Freight
Light sheet and cut blanks can fly out when a shutdown cannot wait; cost and routing come with the quote.
Country-Specific ETA
Your country and port decide the 5-30 day transit, and we confirm the date in the quotation.
Free Quote
Send your thickness, width and quantity list to get a firm Monel 400 plate price from India.
FAQ on Monel 400 Plate
What is the Monel 400 plate price per kg in India?
Rate depends on thickness, size, quantity and nickel-copper market; send list.
What are Monel 400 plate uses?
Marine, chemical processing, valves, pumps, shafts, heat exchangers and tanks.
What are Monel 400 plate properties?
Annealed: tensile 485 MPa min, yield 195 MPa min, elongation 35% min.
Which standard covers Monel 400 plate?
ASTM B127 (ASME SB127) covers UNS N04400 plate, sheet and strip.
Which documents ship with an export order?
Invoice, packing list and EN 10204 3.1 certificate; 3.2 on request.
Is Monel 400 plate magnetic?
Annealed Monel 400 is weakly magnetic or non-magnetic near room temperature.
Can Monel 400 plate be age hardened?
No, only cold work strengthens it; Monel K500 is age-hardenable.