monel k500 plate

  • Home
  • monel k500 plate suppliers

Most reliable ASTM B127 Monel K500 Sheet, monel k500 plate suppliers, Alloy K500 B127 Coil manufacturer of in India, UNS N05500 Monel K500 Strip suppliers.

Ask free sample from 2.4375 Monel K500 Shim Sheet suppliers, Manufacturer of Monel K500 Alloy Foil, Stockist of Monel Alloy K500 Strip Tape in Mumbai, India, check Monel K500 ASTM B127 Hot Rolled Plate Price in India

Monel K500, also referred to as Monel UNS No5500 Sheet  is an age hardened Nickel Copper based alloy. 2.4375 Monel K500 Shim Sheet is an alloy which combines the corrosion resistance properties  of Alloy 400 with an increase in its properties, namely -  high strength corrosion fatigue and erosion resistance.


Monel K500 Plate
Monel K500 Plate Suppliers
Monel K500 Sheet
Monel K500 Sheet
UNS N05500 Monel K500 Strip
UNS N05500 Monel K500 Strip

 

Table Of Content

Order Monel 2.4375 Shim Stock custom sizes online, supplier of Alloy K500 Monel 2.4375 Cold Rolled Plate, manufacturers of Monel Grade K500 Polished Plate, Check Monel K500 UNS N05500 Flat Plate Price List, importer of Monel 5500 Plate in India

Monel K500 Plate could be further strengthened by performing a cold working procedure before the precipitation hardening process.Since the ASTM B127 is specification which covers rolled nickel- copper based Monel 400, it can be used in the manufacture of components such as plate, ASTM B127 Monel K500 Sheet, and strip. Similarly, just like Monel alloy 400, the material used in the manufacture of UNS N05500 Monel K500 Strip must not only conform to the required mechanical properties of the specification, but also to the requirements in terms of the chemistry of the specified Alloy K500 B127 Coil.

The specified Monel Alloy K500 Strip Tape envelopes mechanical properties such as tensile strength, yield strength, elongation, and Rockwell hardness along with its confirmation to the required grain size.Because of the alloys higher tensile strength as compared to the parent alloy, the Alloy K500 Monel 2.4375 Cold Rolled Plate displays excellent mechanical properties across a broad spectrum of temperatures which would range from sub-zero temperatures and could go right up to about 480 C.

Monel K500 ASTM B127 Hot Rolled Plate, similar to Monel 400 demonstrates superior resistance to corrosion in an extensive range of marine as well as chemical environments. Which means the Monel K500 Steel Polished Cold Drawn Plate is able to resist corrosion against mediums such as pure water to non-oxidising mineral acids, salts and alkalis, when the Monel 2.4375 Shim Stock has been exposed to these environments.

 

Specification of Monel K500 Plate

Grade Alloy K500 (75 Ni/16 Cr) - UNS N05500 - Monel K500
Monel K500 Plate Specification ASTM B 127, ASME SB127
Type Clad Plate, Rolling Plate, Flat Shim, Plain Sheet, Rolling Sheet Rolls, Foils, Coils, Plate, Strip, Sheet, Flats, Blank (Circle), ,Flat Sheet, Shim Sheet, soft annealed, descaled, sheared, annealed, Checker Plate, tread plate
ASTM B127 Alloy K500 Plate surface Hot rolled plate (HR), Cold rolled sheet (CR), No.1 finish hot rolled ASTM B127 Alloy K500 Plate, BA, No.3, No.4, No.6, No.1, No. 2D, No. 2B, BA NO(8), No.7, 2B, 2D, SATIN (Met with Plastic Coated), 2B, 1D, No.4, 8K, BA, hairline, brush, satin, mirror etc.
ASTM B127 Alloy K500 Plate Length 0-12mm or as required
Alloy Monel K500 Plate Thickness 0.3 to 1200 mm or as required
K500 Monel Plate Width 0-2500mm or as required
UNS N05500 Monel K500 Plate Process Hot/ Cold Rolled

 

Other Useful Information of Monel K500 Plate for buyers

ASTM B127 Alloy K500 Plate, Sheet and Strip
BS3073NA18 (Strip), ISO 6208 (Plate, Sheet and Strip), BS3072NA18 (Sheet and Plate), QQ-N-286 (Plate, Sheet and Strip), DIN 17750 (Plate, Sheet and Strip)
Monel K500 Plate standards and approvals
  • ASTM A 480
  • ISO 15510
  • EN ISO 18286
  • EN 10088-1
  • EN 10051
  • ASTM A 959
  • EN ISO 9445
  • ASME IID
Tolerances of width and thickness
  • EN 10151 ASTM B127 Alloy K500 strip for springs
  • EN 10258 (formerly DIN 59381)
  • EN 10088 ASTM B127 Alloy K500 strip (general)
UNS N05500 Plate Hardness Half Hard, Soft, Spring Hard, Quarter Hard, Hard ASTM B127 Alloy K500 Sheet suppliers
Availability of ASTM B127 Alloy K500 Foil sizes
  • Width: Up to 500 mm (19.5 in)
  • Thickness : 8-100 microns (0.00031-0.004 in)
  • Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns.
Standard ASTM B127 Alloy K500 Plate & Sheet Sizes

1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm

  • Hot rolled K500 Monel Plate 3.0–10.0 mm
  • Cold rolled K500 Monel Plate 0.5-6.4 mm
Plasma profiles As per customer's drawings
Profiling

To provide a full profiling service in India we use numerous profiling methods including:

  • Plasma Plate Cutting
  • Oxy-propane Flame Cutting
  • Laser Plate Cutting
Value added services for ASTM B127 Alloy K500 Coil
  • Blanking
  • Slitting
  • Cut-to-length
  • Polishing
Manufacturer & exporter of
  • Alloy Monel K500 Clad plate: Alloy Monel K500 Clad plate is a composite steel plate made by bonding UNS N05500 Monel K500 plate, etc.
  • K500 Monel Sheet: material under 3/16" [5.00 mm] in thickness and 24" [601 mm] and over in width;
  • ASTM B127 Alloy K500 Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width;
  • ASTM B127 Alloy K500 Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [601 mm] in width.
Value added services for ASTM B127 Alloy K500 Plate Waterjet cutting, Laser cutting, Bending and mechanical processing, Plasma cutting, welding, edge preparation, sawing and shearing.
Monel K500 Plate Origin European Origin, Indian Origin, Japanese Origin
Test SGS testing, UT, TUV etc
Why buy ASTM B127 Alloy K500 Plate from Metal Tube Industries?
  • Mill Test Certificate is supplied with shipment.
  • Free sample
  • EN 10204 3.1
  • Minimum Nitrogen content and Ferrite Count Test
  • Free quote
  • NABL Approved Lab Reports
  • Tested to ASTM A923 Method "C" or ASTM G48 Method "A".
  • Any third party inspection is accepted.
Packing of Monel K500 Plate Bundles with waterproof cloth outside or plywood box


Alloy K500 Plate Price in India

Price list of Monel K500 Plate in India UNS N05500 Monel K500 Plate Price in India (INR) per unit K500 Monel Plate Price in UK Pound sterling Alloy Monel K500 Plate Price in UAE Dirham

Monel K500 Plate 3mm Dia X 395mm X 245mm

INR 9,414 101.50 UK Pound sterling 487.07 UAE Dirham

This is an approximate Cost of K500 Monel Sheet in India. For factory price buy directly from Monel K500 Plate manufacturers in India, check latest ASTM B127 Alloy K500 Plate price list & stock sizes please mail us.

 

What is Monel K500 Plate?

Monel Grade K500 Polished Plate is an alloy which has been precipitation hardened by the additions of elements like aluminium and titanium in the metal. As an alloy, Monel K500 Nickel Clad Plate retains the excellent corrosion resistant characteristics of Monel 400, with the modifications being the alloys enhanced tensile strength and hardness properties. These properties have been enhanced after precipitation hardening of aluminium and titanium in the Monel K500 UNS N05500 Flat Plate as compared to Monel 400

For e.g. -  Monel N05500 4mm Thick Plate, which is a modified version of Alloy 400 has approximately three times the yield strength and two times the tensile strength values as opposed to its parent metal, Monel 400.

 

Types of Monel K500 Plate

ASTM B127 Alloy K500 Precision Strip
ASTM B127 Alloy K500 Precision Strip
Alloy Monel K500 Strip Tape
Alloy Monel K500 Strip Tape
K500 Monel Shim Sheet
K500 Monel Shim Sheet
ASTM B127 Alloy K500 Perforated Sheet
ASTM B127 Alloy K500 Perforated Sheet
K500 Monel Plate
K500 Monel Plate
ASTM B127 Alloy K500 Sheet
ASTM B127 Alloy K500 Sheet
UNS N05500 Monel K500 Foil
UNS N05500 Monel K500 Foil
Alloy Monel K500 Coil
Alloy Monel K500 Coil
Monel K500 Rolling Plate
Monel K500 Rolling Plate
Alloy Monel K500 Polished Plate
Alloy Monel K500 Polished Plate
K500 Monel Quarto Plate
K500 Monel Quarto Plate
ASTM B127 Alloy K500 Flat Sheet
ASTM B127 Alloy K500 Flat Sheet
2.4375 Monel K500 Hot Rolled Plate
2.4375 Monel K500 Hot Rolled Plate
Monel K500 Din 2.4375 Cold Rolled Sheet
Monel K500 Din 2.4375 Cold Rolled Sheet
Monel Alloy K500 Checker Plate
Monel Alloy K500 Checker Plate
Monel K500 Nickel Alloy Cold Rolled Plate
Monel K500 Nickel Alloy Cold Rolled Plate
UNS N05500 Monel K500 Chequered Plate
UNS N05500 Monel K500 Chequered Plate
Alloy K500 Nickel Clad Plate
Alloy K500 Nickel Clad Plate
Alloy Monel K500 Shim Stock
Alloy Monel K500 Shim Stock
Monel K500 Superalloy Mesh Plate
Monel K500 Superalloy Mesh Plate

 

Ready Stock of Alloy Monel K500 Plate

we stock following Types of Monel K500 Plate:

K500 Monel Plate UNS N05500 Monel K500 Rolling Plate
ASTM B127 Alloy K500 Chequered Plate Alloy Monel K500 Quarto Plate
UNS N05500 Monel K500 Cold Rolled Plate Alloy Monel K500 Bbq Plate
Alloy Monel K500 Hot Rolled Plate ASTM B127 Alloy K500 Perforated Plate
Monel Alloy K500 Custom Cut Plate Monel K500 Nickel Alloy Sheet
Monel K500 Nickel Alloy Embossed Plate K500 Monel Plasma Cutting Plate
Alloy Monel K500 Plate Mill Finish Monel K500 Din 2.4375 Thin Plate
ASTM B127 Alloy K500 Plate 2b Finish Alloy K500 Nickel Diamond Plate
Monel K500 Alloy Checker Plate 2.4375 Alloy K500 Polished Plate
2.4375 Monel K500 Checkered Plate ASTM B127 Alloy K500 Laser Cut Plate
Monel K500 Superalloy 1/4 Inch Plate 2.4375 Monel K500 Perforated Sheet
Monel K500 Grade 10mm Plate Monel Alloy K500 Cold Rolled Sheet
2.4375 Alloy K500 Plate Brushed Finish Monel K500 Superalloy Hot Rolled Sheet
UNS N05500 Alloy K500 Plate Mirror Finish Monel K500 Grade Chequered Plate
Monel K500 Din 2.4375 Chequer Plate UNS N05500 Alloy K500 Tread Plate
Alloy K500 Nickel Clad Plate Monel K500 Alloy Tisco Plate

 

UNS N05500 Monel K500 Plate density

UNS N05500 Monel K500 Plate density
g/cm3 : 8.44
lb/in.3 : .0.305

 

ASTM B127 Alloy K500 Plate melting range

ASTM B127 Alloy K500 Plate melting range

°F : 2400-2460
°C : .1315-1350

 

Size chart of K500 Monel Plate

Stocked Sizes
Size (in inches)
Size (in mm)
.125"
3.18mm
.134"
3.40mm
.156"
3.96mm
.187"
4.75mm
.250"
6.35mm
.312"
7.92mm
.375"
9.53mm
.500"
12.7mm
.601"
15.9mm
.750"
19.1mm
.875"
22.2mm
1"
25.4mm
1.125"
28.6mm
1.250"
31.8mm
1.500"
38.1mm
1.750"
44.5mm
2"
50.8mm
2.500"
63.5mm
3"
76.2mm

Dimensions: widths 1000/1220/1500 mm, lengths 2000/2500/3000 mm.

 

Weight per Unit of Alloy K500 Monel Plate

K500 Monel Sheet Weight & Density

Thickness Alloy Plate Weight per Unit Area Density
3/16 inches Monel K500 0.06000 lbs/in²42.184176 kg/m² 0.315 lbs/in³8.72 g/cm³
1/4 inches Monel K500 0.08 lbs/in²56.245568 kg/m² 0.315 lbs/in³8.72 g/cm³
3/8 inches Monel K500 0.121 lbs/in²85.0714216 kg/m² 0.315 lbs/in³8.72 g/cm³
1/2 inches Monel K500 0.161 lbs/in²113.1942056 kg/m² 0.315 lbs/in³8.72 g/cm³
5/8 inches Monel K500 0.196 lbs/in²137.8016416 kg/m² 0.315 lbs/in³8.72 g/cm³
3/4 inches Monel K500 0.235 lbs/in²165.221356 kg/m² 0.315 lbs/in³8.72 g/cm³
7/8 inches Monel K500 0.274 lbs/in²192.6410704 kg/m² 0.315 lbs/in³8.72 g/cm³
1 inches Monel K500 0.313 lbs/in²220.0607848 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/4 inches Monel K500 0.391 lbs/in²274.9002136 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/2 inches Monel K500 0.47 lbs/in²330.442712 kg/m² 0.315 lbs/in³8.72 g/cm³
1 3/4 inches Monel K500 0.549 lbs/in²385.9852104 kg/m² 0.315 lbs/in³8.72 g/cm³
2 inches Monel K500 0.627 lbs/in²440.8246392 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/4 inches Monel K500 0.705 lbs/in²495.664068 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/2 inches Monel K500 0.784 lbs/in²551.2065664 kg/m² 0.315 lbs/in³8.72 g/cm³
2 3/4 inches Monel K500 0.862 lbs/in²606.0459952 kg/m² 0.315 lbs/in³8.72 g/cm³
3 inches Monel K500 0.941 lbs/in²661.5884936 kg/m² 0.315 lbs/in³8.72 g/cm³

 

Dimensions of Monel K500 Plate

ASTM B127 Alloy K500 Plate Imperial Dimensions

Plate Surface finish Gauge (in) Width (max in)
2B – Cold rolled, heat treated, pickled, skin passed Plate 10–24 72*
2D – Cold rolled, heat treated, pickled plate 12–24 60
BA Mexinox only 18–28 48
Polished plate (not brushed) 11–24 60
Temper rolled plate Mexinox only 13–29 48

ASTM B127 K500 Alloy Plate Metric Dimensions

Plate Surface finish Thickness (mm) Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate 0.25–8.0 2032
2D – Cold rolled, heat treated, pickled plate 0.4–6.35 1524
2E – Cold rolled, heat treated, mechanically descaled plate 0.4–8.0 2032
2R – Cold rolled, bright annealed plate 0.25–3.5 1524
2H – Work hardened plate 0.4–6.35 1524
Polished, brushed plate 0.5–4.0 1524

 

Difference between Monel K500 Plate, Sheet, & Foil

  • Thickness greater than 0.15 mm and less than 6.35mm is called a Monel K500 Sheet.
  • Thickness greater than 6.35 mm is called a Monel K500 Plate.
  • Thickness less than 0.15mm is called a Monel K500 Foil.

 


UNS N05500 Monel K500 Plate Properties

Chemical Composition of ASTM B127 Alloy K500 Plate

Grade C Mn Si S Cu Fe Ni
Monel K500 0.25 max 1.5 max 0.5 max 0.010 max 27.00 – 33.00 0.5 – 2 63.00 min

 

ASTM B127 Alloy K500 Plate Mechanical Properties

Ultimate Tensile

Yield Strength (0.2% OS)

Elong.

Hardness

Rockwell C, min.

Hardness Brinell 3000 kg, min.

Cold Worked/SR Over 1(25.4) to 3

Min

140 KSi

100 KSi

17.0

29

280

Max

         

Min

965 MPa

690 MPa

     

Max

         

Hot Worked/ Aged Hardened

Min

140 KSi

100 KSi

20.0

27

265

Max

         

Min

965 MPa

690 MPa

     

Max

     

 

Equivalent Grades of Monel K500 Plate

STANDARD WERKSTOFF NR. UNS
Monel K500 2.4375 N05500

 

Difference Between Monel and Inconel

Monel

Monel may be a gather of nickel alloys, basically composed of nickel (up to 67%) and copper, with little amounts of iron, manganese, carbon, and silicon.

Monel Alloys Compositions (percentages)

Trade Name ASTM/AISI

Alloy type

UNS %Cu %Al %Ti %Fe %Mn %Si %Ni
Monel 400 B 127, B 164 N04400 28-34 2.5 max 2.0 max 0.5 max 63 min
Monel 401 N04401 28-34 2.5 max 2.0 max 63 min
Monel 404 N04404 Rem 0.05 max 0.5 max 0.1 max 0.1 max 52-57
Monel K-500 B 865 N05500 27-33 2.3-3.15 0.35-0.85 2.0 max 1.5 max 0.5 max 63 min
Monel 405 B 164 N04405 28-34 2.5 max 2.0 max 0.5 max 63 min

 

Inconel

Inconel is a family of austenitic nickel-chromium-based superalloys.

Inconel Composition

Inconel Element (% by mass)
Ni Cr Fe Mo Nb Co Mn Cu Al Ti Si C S P B
601 72.0 14.0–17.0 6.0–10.0 1.0 0.5 0.5 0.15 0.015
617 44.2–56.0 20.0–24.0 3.0 8.0–10.0 10.0–15.0 0.5 0.5 0.8–1.5 0.6 0.5 0.15 0.015 0.015 0.006
601 58.0 20.0–23.0 5.0 8.0–10.0 3.15–4.15 1.0 0.5 0.4 0.4 0.5 0.1 0.015 0.015
690 59.5 30 9.2 0.35 0.01 0.02 0.35 0.019 0.003
718 50.0–55.0 17.0–21.0 balance 2.8–3.3 4.75–5.5 1.0 0.35 0.2–0.8 0.65–1.15 0.3 0.35 0.08 0.015 0.015 0.006
X-750 70.0 14.0–17.0 5.0–9.0 0.7–1.2 1.0 1.0 0.5 0.4–1.0 2.25–2.75 0.5 0.08 0.01

 

Monel K500 plate uses

  • Oil well industry
  • Oil and gas production safety lifts and valves
  • Sour-gas service applications
  • Oil-well tools and instruments like drill collars
  • Chains, cables, springs, valve trim, fasteners for marine service
  • Pump shafts and impellers in marine service
  • Doctor blades and scrapers

 

Alloy K500 Plate Features

  • Non-magnetic alloy
  • Excellent mechanical properties from sub-zero temperatures up to about 480C
  • Resistant to a sour-gas environment
  • Excellent resistance to high velocity sea water
  • Corrosion resistance in an extensive range of marine and chemical environments. From pure water to non-oxidizing mineral acids, salts and alkalis.

 

Check out our different price list for Monel K500 plate in following States

West Bengal
Gujarat
Bihar
Kerala
Noida
Tamil Nadu
Maharashtra
Karnataka
Andhra Pradesh
Uttar Pradesh
Delhi
Jharkhand

 

We can arrange Monel K500 Sheet in shortest time in below countries

Bahrain
Oman
United Arab Emirates
Kuwait
Iraq
Saudi Arabia(KSA)
Qatar

 

A full range of Monel K500 Steel Polished Cold Drawn Plate suppliers, stockholder of Monel K500 Grade Slitting Coil in India, manufacturers of Monel N05500 4mm Thick Plate, wholesaler of Monel UNS 5500 2D Plate in Mumbai
one of the top Monel UNS N05500 Sheet, stockist of Monel UNS N05500 Polish Plate, traders of Monel K500 Nickel Clad Plate, dealer of 2.4375 Monel K500 Shim Sheet